• Tribology and Lubricants
• /
• v.28 no.3
• /
• pp.136-141
• /
• 2012

In this paper, we investigated the friction characteristics of $W100^{\circ}{\o}L25m$ ellipse type surface pattern, on bearing steel. These characteristics are researched by utilizing a pin-on-disk wear test machine, under various velocities and other conditions. The reduction of friction is a necessary requirement for the improved efficiency of industrial parts. As the speed increases, there is a decrease in the effect of the dimple of friction characteristic in low velocity, with substantially little change to density. Conversely, as the load increases, the test direction of ellipse type dimple pattern, resulting in a difference in the texture of these two components. At a dimple density of 7.5% the friction characteristic is easily demonstrated, with a consistent change in both speed and load.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.1-7
• /
• 2001

Recently, several LPG engines for heavy-duty vehicles have been developed, which can replace some diesel engines that are one of a main source for air pollution in urban area. As a preliminary study on the liquid phase LPG injection (hereafter LPLI) system applicable to a heavy duty LPG engine, the engine output and combustion performance were investigated with various combustion chambers and fuel compositions using a single cylinder engine equipped. Experimental results revealed that ellipse, double ellipse and nebula type combustion chamber made a more advantage in breaking swirl flow into small turbulence scale than bathtub type. Especially, performance of nebula type showed most highest efficiency and engine output under lean mixture conditions. An investigation fur various LPG fuel compositions was also carried out, and revealed that the case with 40% propane and 60% butane shows the lowest efficiency at stoichiometry, however, as the mixture became leaner its efficiency increased and became even higher for 100% propane case.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.43.4-44
• /
• 2017

Bar fractions depend on the properties of host galaxies. However, the observational studies did not provide consistent tendency. We investigated the bar fractions and their dependence on properties of host galaxies using three bar classifications: visual inspection, ellipse fitting method and Fourier analysis from a volume-limited sample of 1,698 disk galaxies brighter than Mr=-15.2 within z = 0.01 from the Sloan Digital Sky Survey (SDSS) Data Release 7 (DR7). We found two causes to make the discrepancy in previous studies. One is caused by the difficulty in automatically identifying bars for bulge-dominated galaxies. In particular, ellipse fitting methods could miss early-type barred galaxies when a large bulge weakens the transition between a bar and disk. The other is caused by the difference in the correlation between the bar types and host morphology for strong bars and weak bars. Strong bars are preponderant in early-type spirals which are red, bulge-dominated and highly concentrated, whereas weak bars are frequent in late-type spirals which are blue, disk-dominate and less-concentrated. Therefore, how much weak bars they contain affects the trend of bar fraction on host galaxy properties. We also discuss the effect of host properties on the formation, evolution, and destruction of bars.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.4
• /
• pp.113-122
• /
• 2010

Space frame structures are included in the large spatial structures and can adopt various structure types. But, it is not easy to choose the optimal member size and shape because it depends on the structural engineer's experience and the repeated trial and error. Therefore, in this study, the final goal is to help the designer with the selection of the optimum shape. First, various space frame structures with ellipse dome and vault complex types are chosen and the shape generation method is considered to generate the nodes, coordinates and members. In optimal design process of space frame structure, each node coordinate changes according to height variation or the number of rings. Therefore, the auto generation technique of nodes and members is required in order to consider this phenomenon in optimal design process. Next, the shape generation module is created, base on the shape generation method. This module is connected with the analysis module and the optimization algorithm. Finally, the example model is presented for the evaluation of the efficiency of optimization algorithms.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.33.3-33.3
• /
• 2019

Automatic, yet reliable methods to find and classify barred galaxies are going to be more important in the era of large galaxy surveys. Here, we introduce a new approach to classify barred galaxies by analyzing the butterfly pattern that Buta & Block (2001) reported as a bar signature on the potential map. We make it easy to find the pattern by moving the ratio map from a Cartesian coordinate to a polar coordinate. Our volume-limited sample consists of 1698 spiral galaxies brighter than Mr = -15.2 with z < 0.01 from the Sloan Digital Sky Survey/DR7 visually classified by Ann et al. (2015). We compared the results of the classification obtained by four different methods: visual inspection, ellipse fitting, Fourier analysis, and our new method. We obtain, for the same sample, different bar fractions of 63%, 48%, 36%, and 56% by visual inspection, ellipse fitting, Fourier analysis, and our new approach, respectively. Although automatic classifications detect visually determined, strongly barred galaxies with the concordance of 74% to 86%, automatically selected barred galaxies contain different amount of weak bars. We find a different dependence of bar fraction on the Hubble type for strong and weak bars: SBs are preponderant in early-type spirals, whereas SABs are in late-type spirals. Moreover, the ellipse fitting method often misses strongly barred galaxies in the bulge-dominated galaxies. These explain why previous works showed the contradictory dependence of the bar fraction on the host galaxy properties. Our new method has the highest agreement with visual inspection in terms of the individual classification and the overall bar fraction. In addition, we find another signature on the ratio map to classify barred galaxies into new two classes that are probably related to the age of the bar.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.6
• /
• pp.39-44
• /
• 2019

The evaporator is a key driver of an air conditioning system's efficiency. In this study, we study methods of maximizing the efficiency of a Massey Ferguson (MF) evaporator by measuring how the cooling performance of different shapes vary with temperature. We varied the tube insertion depth as well as the shape of the evaporator's header and tube. When we compare header shapes of "D", "Ellipse", and "Quadrangle" types, we find that the elliptical header creates the smallest pressure loss and the highest temperature difference. Between tube shapes of "Rectangular", "Projection", and "Circular" types, the "Projection" type tube creates the most temperature difference. We also investigated the depth of tube insertion in the header and find that tube insertion of 5 - 10 mm is feasible; we selected the depths of 5, 7, and 10 mm since they corresponded to approximately 30%, 50%, and 70% of the total width of the header. The tube insertion test demonstrated that a tube insertion depth of 7 mm creates the least pressure loss and the highest temperature difference. In conclusion, the optimal evaporator design uses an "Ellipse" type header, "Projection" type tube, and a tube insertion depth between 30 and 50% of the header width.

• Korean Journal of Ichthyology
• /
• v.6 no.2
• /
• pp.160-171
• /
• 1994

The lateral line scales of the Labridae fish are ellipse, pentagoanl, or hexagonal, but most of them are the hexagonal type. Those of Ciarrhilabrus temminckii, ellipse, Xyrichtys dea, Choerodon azurio, Semicossyphus reticulatus and Bodianus oxycephalus are pentagonal. The most complex species are Choerodon azurio which is pentagonal, but similar tohexagonal, and Pteragogus flagellifera which is hexagonal, but similar to pentagonal type. The sizes of sensory tubes for the Labroides dimidiatus and Cheilio inermis were larger than the other group and Xyrichtys dea had most narrow one. These varied sizes of sensory tube indicate that development of sensory tube is deeply connected with inhabitation.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.4
• /
• pp.1-19
• /
• 2008

This research is to analyze the force on landing 3 Type of Halfpipe Curves(Ellipse, Circle, Brachistochrone) based on the mechanical calculation of normal force on a sloping surface. Jumping off a platform on a bard horizontal surface, the flexing of the legs, the softness of the snow, the angle of the landing surface, initial velocity and the forward motion of the snowboarder can contribute to reducing the force on landing. But halfpipe is significantly determined by the curvature of surface. It is definitely verified that the Brachistochrone curve is more safety than others. However currently using the Ellipse curve is mostly safe too. If we consider the efficiency of construction, we can easily think there is no use of another curves except normal ellipse curved halfpipe. It would better that geometrically verity curved halfpipe should be designed for improving fluent skills to snowboarders. This methode of research can be a model of scientifical research on sports safety how can sportsman reduce critical injury by designing optimal halfpipe facilities and manual.

• Environmental Analysis Health and Toxicology
• /
• v.28
• /
• pp.5.1-5.7
• /
• 2013

Objectives Despite increasing availability of global positioning system (GPS), no research has been conducted to analyze GPS data for exposure opportunities associated with time at indoor and outdoor microenvironments. We developed location-based and time-weighted spatial measures that incorporate indoor and outdoor time-location data collected by GPS. Methods Time-location data were drawn from 38 female subjects in California who wore a GPS device for seven days. Ambient standard deviational ellipse was determined based on outdoor locations and time duration, while indoor time weighted standard deviational ellipse (SDE) was developed to incorporate indoor and outdoor times and locations data into the ellipse measure. Results Our findings indicated that there was considerable difference in the sizes of exposure potential measures when indoor time was taken into consideration, and that they were associated with day type (weekday/weekend) and employment status. Conclusions This study provides evidence that time-location weighted measure may provide better accuracy in assessing exposure opportunities at different microenvironments. The use of GPS likely improves the geographical details and accuracy of time-location data, and further development of such location-time weighted spatial measure is encouraged.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.186-187
• /
• 2002

Recently, there has been much interest in magnetic thin film patterned in submicron scale because of possible ultrahigh density storage media or logical device applications [1-3]. Various geometries such as rectangle, circle, ring and ellipse type dots have been studied to find the shape showing stable switching behavior from repeated cycles. However, rectangle and circle types may not be suitable for device applications because they have two uncontrollable different magnetization reversal modes: C state and S state, resulting in different coercivity and irreproducible switching[4]. (omitted)