• Clinics in Shoulder and Elbow
• /
• v.13 no.2
• /
• pp.202-208
• /
• 2010

Purpose: In this study we introduced minimal invasive plate osteosynthesis (MIPO) and analyzed clinical outcomes to determine the effectiveness of this intervention in proximal humerus fractures. Materials and Methods: We studied 27 patients including 16 cases with a 2-part fracture, 10 cases with a 3-part fracture, and 1 case with a 4-part fracture. Clinical outcomes were evaluated using UCLA score, KSS score and recovery of range of motion. Time to union and humerus neck-shaft angle change were estimated by radiologic assessment. The average follow up period was 19 months. Results: UCLA scores were "excellent" for 15 patients, "good" for 12 patients. The mean KSS score was 91.4 at final follow-up. The average shoulder range of motion was $167.2^{\circ}$ in forward elevation. Bone union occurred by 14.1 weeks postoperatively. Humerus neck-shaft angle recovery was "excellent" in 24 patients and "moderate" in 3 patients. There were no complications such as axillary nerve paralysis, deep infection, or subacromial impingement of the plate. Conclusion: MIPO for proximal humerus fractures is an effective procedure if performed with sufficient understanding of the anatomical structures. MIPO leads to minimized dissection of soft tissue, low complication rates and early recovery of range of motion.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.3
• /
• pp.71-79
• /
• 2009

We expanded the 3D building information extraction method using shadow and vertical line from single high resolution image with meta information into the method for single high resolution image without meta information. Our method guesses an azimuth angle and an elevation angle of the sensor and the sun using reference building, selected by user, on an image. For test, we used an IKONOS image and an image extracted from the Google Earth. We calculated the Root Mean Square (RMS) error of heights extracted by our method using the building height extracted from stereo IKONOS image as reference, and the RMS error from the IKONOS image and the Google Earth image was under than 3 m. We also calculated the RMS error of horizontality position by comparison between building position extracted from only the IKONOS image and it from 1:1,000 digital map, and the result was under than 3 m. This test results showed that the height pattern of building models by our method was similar with it by the method using meta information.

• Korean Journal of Environment and Ecology
• /
• v.17 no.3
• /
• pp.201-209
• /
• 2003

This study was carried out to select proper species fur early stage replantation in forest road cut-slope. From one to fifteen years elapsed forest roads in four regional areas of Gyeongsangnam-do and Jeollanam-do, sample plots were selected, and their vegetations and environmental factors were investigated. Invaded species and plant coverage have increased with elapsed years. The occurrence rate of herbs have decreased, while the occurrence of trees have increased with elapsed years. The ordination analysis showed that distribution of species was influenced by the elapsed year, the slope angle of the cut-slope, elevation, and the direction angle of the cut-slope. Dactylis glomerata, Poa pratensis, Amorpha fruticosa, Lespedeza sp., Artemisia princeps var. orientalis, Duchesnea chrysantha, Miscanthus sinensis, Pueraria thunbergiana, Zanthoxylum schinifolium, Rhus chinensis, and Weigela subsessilis were considered as proper species for replantation in forest road cut-slope, besides the species used already. Seventy seven family, 190 genus, 233 species, 38 variety, and 271 species in total were counted as invaded plant species in the survey zone. Naturalized plants were 18 species. Invaded species are, with high frequency first, Rubus crataegifolius, Artemisia princeps var. orientalis, Zanthoxylum schinifolium, Pueraria thunbergiana, Pinus densiflora, Lespedeza maximowiczii, Lysimachia clethroides, Lespedeza bicolor, Youngia denticulata, Miscanthus sinensis, and Erigeron annuus.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.4 no.2
• /
• pp.77-87
• /
• 1986

As for the deformation measurement of structure, there are many controversial points in using the methods by the strain guage, inclinometer, bial guage, and geodetic method because of the difficulty of instrument setting and the problem in the degree of accuracy of the results as well as in the economical aspect. Therefore, to verify the superiority of the Close- Range Photogrammetry method for the structural deformation measurement, the result of load deformation on the model structure, which was made using the Close-Range Photogrammetry method was compard with the results which was made using the methods of dial guage, precision level, and triangulation. In addition to that, to consider the general problem which would happen when C. R. P method was applied to the practical structure. The elements of C. R. P method like camera rotation angle ($\psi$,$\omega$), exposure elevation (Z$_{L}$), and angle of inclined base line ($\theta$) were experimented, and their specificities were reconsidered. As a result, the application of C. R. P method to the general structure is expected to be increased not only in the aspect of accuracy but in the economical aspect.t.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.4
• /
• pp.86-93
• /
• 2009

This study analyzes the systematic visual images and factors in and outside of the main courtyard in Byungsan-seowon. The results are as follows; In terms of space distribution, Ip-kyo-dang is located at an elevation of 85m and the distance to Byung-san is 365m. Byung-san with the mean gradient over $50^{\circ}$ looked so stiff, and the east side of that cliff is higher than west. In terms of the angle of elevation relationship between Man-dae-ru and Byung-san draw 10.5 degree and it suits with human scale. The D/H ratio of 1:3 makes the given place very spacious but the linear stiff shape of Byung-san may cause the feeling of closeness. The results of the visual image analysis of the main yard facing Byung-san is very positive with a score of 1.70 in openness, 1.78 in wideness, 1.96 in beauty, 1.96 in harmony for the spacious arrangement which overall, makes the seowon beautiful with many open spaces. There are 4 main implicated factors analyzed which are uniqueness, aesthetic, openness and nature. Out of the total variables, these factors' descriptive ability is 55.90% and the remaining 44.10% is error and peculiarities variables. The factor which contributed most to Byungsan-seowon's main yard's visual preference was the 'aesthetic' with B-values of 0.661 and 0.455 in the nature category.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.2
• /
• pp.181-198
• /
• 2008

Designing satellite constellations providing partial coverage of certain regions becomes more important as small low-altitude satellites receives an increasing attention due to its cost-effectiveness analysis. Generally, Walker's method is a standard constellation method for global coverage but not effective for partial coverage. The purpose of this study is to design optimal constellation of satellites for effective observation in Korean peninsula regions. In this study, a new constellation design method is presented for partial coverage, using direct control of satellites' orbital elements. And also, a ground repeating circular orbit is considered for each satellite's orbit with the Earth oblateness effect. As the results, at least four satellites are required to observe the Korean peninsula regions effectively when minimum elevation angle is assumed as 12 degrees. The results from new method are better than those from the best Walker method. The proposed algorithm will be useful to design satellite constellation missions of Korea in future.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.4
• /
• pp.165-175
• /
• 2005

Geographic Information System(GIS) is useful to preserve cultural heritage and land use management using both spatial information management technique and spatial analysis function in cultural heritage management. The purpose of this study is to build a database of pottery and kiln sites in South Korea, to analyze site locations and finally to make prediction model. The locations of 1,200 sites are put into GIS database. Such factor elevation, slope angle, aspect, horizontal/vertical distance from the nearest water are analyzed. Each factor was statistically analyzed on GIS and represented to rank 1-5. Pottery/kiln can be predicted by the spatial analysis function in overlay methods. As a result of this study, preliminary application of prediction model shows that the high potential area is between the slope and alluvial plain. Field survey in the Sungbuk-dong in Daejeon city supports the preliminary result. More data can make improve efficient prediction model in unknown areas.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.219-228
• /
• 2013

The surveillance imaging equipments are functioning to observe the shape of the target in real time or to measure its location precisely. The roles of such equipments are becoming more important in today's weapon systems.The aforementioned imaging equipments can be classified based on the modes of operations such as fixed, installed on cars, or composite of those. Also, according to different concepts of sensor operation, a separate type uses independent housing for each sensor whereas in a composite type a set of multiple sensors are housed into a unit altogether. The sensors in general have magnetism, thereby introducing the possible negative effects, particularly in the composite types, in locating the reference position, which is carried out by the digital compass. The use of shielding material/housing could be an option but results in increased weight and reduced portability, restricting its use in composite type equipments. As such, the objective of this paper is to study on how to reduce such magnetic effects on the position location. To do so, in the absence of magnetic shielding, a variety of sensor positions were first modeled. By combing the result with the fact that the functions of PAN & Tilt are used in the equipments, a new position location algorithm is proposed. The use of the new algorithm can automate the position location process as compared to the manual process of the existing approach. In the algorithm developed, twelve locations are measured in connection with both the azimuth and elevation angles in comparison to the six locations alone around the azimuth angle. As a result, it turns out that the measurement range has been widened but the measurement time reduced. Also, note that the effect of errors the operators may make during measurement could be reduced.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1822-1829
• /
• 2016

DGPS Reference station is established in Korea for improvement of GPS navigation accuracy and needs of integrity. Recently, DGPS stations provide user positioning information on land as well as ocean. However, this paper investigated visibility and interference environment for performance degradation of Chung-ju DGPS reference station. In case of Young-do reference station, visibility and interference environment were satisfied with reference standard. In case of Chung-ju reference station, visibility was satisfied with 7 degree elevation angle. However, interference environment was not satisfied with reference standard of -50dBm. This paper proposed time differential measurement analysis method excluding error of signal noise for analyzing measurement error. Chung-ju reference station measurement analysis result is three times the error than on Young-do in Dec, 2015. In addition, this paper has confirmed measurement performance degradations because of reference station equipment problem. Future study will be carried out performance analysis of 17 DGPS reference station.

• The Journal of Engineering Geology
• /
• v.19 no.1
• /
• pp.99-108
• /
• 2009

Since the preexisting evaluation methods of landslide susceptibility take somehow long time to determine the slope stability based on the field survey and laboratory analysis, there are several problems to acquire immediate evaluation results in the field. In order to overcome the previously mentioned problems and incorrect evaluation results induced by some subjective evaluation criteria and methods, this study tried to develop a method of landslide susceptibility by a quantitative and objective evaluation approach based on the field survey. Therefore, this study developed an evaluation chart for landslide susceptibility on natural terrain using the AHP analysis method to predict landslide hazards on the field sites. The AHP analysis was performed by a questionnaire to several specialists who understands mechanism and influential factors of landslide. Based on the questionnaire, weighting values of criteria and alternatives to influence landslide triggering were determined by the AHP analysis. According to the scoring results of the analysed weighting values, slope angle is the most significant factor. Permeability, water contents, porosity, lithology, and elevation have the significance to the landslide susceptibility in a descending order. Based on the assigned scores of each criterion and alternatives of the criteria, an evaluation chart for landslide susceptibility was suggested. The evaluation chart makes it possible for a geologist to evaluate landslide susceptibility with a total score summed up each alternative score.