• 한국생산제조학회지
• /
• 제20권2호
• /
• pp.139-144
• /
• 2011

This paper presents a boundary element application to determine the optimal impressed current densities at defect position on the pipe line. In this protection paint, enough current must be impressed to lower the potential distribution on the metal surface to the critical values. The optimal impressed current densities are determined in order to minimize the power supply for protection. This inverse problem was formulated by employing the boundary element method. Since the system of linear equations obtained was ill-conditioned, including singular value decomposition, conjugate gradient method were applied and the accuracies of these estimation. Several numerical examples are presented to demonstrate the practical applicability of the proposed method.

• 한국전산구조공학회논문집
• /
• 제26권5호
• /
• pp.393-399
• /
• 2013

본 논문은 그래핀의 모드 I 균열 진전에 대한 분자동역학 해석과 수치보조장을 사용하는 영역 투영 방법의 역문제 해석 방법을 결합하여 균열 선단 응집 법칙을 평가하는 효율적인 방법을 제시하고 있다. 그래핀의 균열 선단 응집 법칙을 결정하는 것은 균열 선단에서 멀리 떨어진 영역의 변위를 사용하여 균열 면에서 미지의 응집 트랙션과 열림 변위를 구하는 역문제를 해석해야 하는데 상호 J-적분과 M-적분의 경로 보존성과 효율적인 수치보조장을 사용하는 방법을 적용하였다. 분자동역학 해석에서 원자 변위를 유한요소 절점 변위로 이동최소자승법을 사용하여 근사하였으며 안정적인 역문제 해석을 통하여 원자 단위의 거동을 연속체 해석으로 연결시킬 수 있는 새로운 방법을 보여주었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.254-259
• /
• 1992

In this paper, we propose an optimal method for the tracking a trajectory of the end-effector of flexible robot arms with multiple joints. The proposed method finds joint trajectories and joint torques necessary to produce the desired end-effector motion of flexible manipulator. In inverse kinematics, optimized joint trajectories are computed from elastic equations. In inverse dynamics, joint torques are obtained from the joint equations by using the optimized joint trajectories. The equations of motion using finite element method and virtual work principle are employed. Optimal control is applied to optimize joint trajectories which are computed in inverse kinematics. The simulation of flexible planner manipulator is presented.

• 비파괴검사학회지
• /
• 제17권4호
• /
• pp.237-247
• /
• 1997

경계요소법에 최소 에너지기법을 적용하여 적외선 스캐닝을 이용한 물체 내부 미지의 공동(cavity)을 탐지하는 기하학적 역 열전도 문제의 해를 구하였다. 이 문제에서 경계요소식은 에너지 최소화 과정을 적용한, quadratic programming 문제로 전환되었으며, 가상적인 내부 경계가 실제 공동의 영역 내부에 위치하도록 정의되었다. 적외선 스캐닝 표면 온도가 측정 오차의 구속 조건을 만족하도록 가상 내부 경계에서의 온도 분포를 결정한 후, 이를 내부 경계 조건으로 하는 경계요소 해석을 수행하여 미지 경계의 위치를 결정하였다. 공동 탐지 알고리듬이 제시되었고 수치해석을 통하여 역 해법에 대한 최소에너지 기법의 효과를 분석하였다.

• Geomechanics and Engineering
• /
• 제16권6호
• /
• pp.577-588
• /
• 2018

A major concern in deep excavation project in soft clay deposits is the potential for adjacent buildings to be damaged as a result of the associated excessive ground movements. In order to accurately determine the wall deflections using a numerical procedure such as the finite element method, it is critical to use the correct soil parameters such as the stiffness/strength properties. This can be carried out by performing an inverse analysis using the measured wall deflections. This paper firstly presents the results of extensive plane strain finite element analyses of braced diaphragm walls to examine the influence of various parameters such as the excavation geometry, soil properties and wall stiffness on the wall deflections. Based on these results, a multivariate adaptive regression splines (MARS) model was developed for inverse parameter identification of the soil relative stiffness ratio. A second MARS model was also developed for inverse parameter estimation of the wall system stiffness, to enable designers to determine the appropriate wall size during the preliminary design phase. Soil relative stiffness ratios and system stiffness values derived via these two different MARS models were found to compare favourably with a number of field and published records.

• Journal of applied mathematics & informatics
• /
• 제27권1_2호
• /
• pp.161-173
• /
• 2009

In this paper, we introduce an iterative scheme for finding a common element of the set of fixed points of a nonexpansive mapping, the set of solutions of the variational inequality for an inverse-strongly monotone mapping and the set of solutions of an equilibrium problem in a Hilbert space. We show that the iterative sequence converges strongly to a common element of the three sets. The results of this paper extend and improve the corresponding results announced by many others.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.938-941
• /
• 1999

In this paper, we designed a pipeline (15,9) Reed-solomon decoder. To compute the error locator polynomials, we used the Euclidean algorithm. This algorithm includes computation of inverse element. We avoided the inverse element calculation in this RS decoder by using ROMs. We designed this decoder using VHDL. Simulation results show that the designed decoder corrects three error symbols. We implemented this design through an Altera FPGA chip.

• East Asian mathematical journal
• /
• 제27권5호
• /
• pp.527-538
• /
• 2011

In this paper, we introduce a new iterative scheme for finding a common element of the set of an equilibrium problem, the set of fixed points of nonexpansive mapping and the set of solutions of the generalized variational inequality for ${\alpha}$-inverse strongly g-monotone mapping in a Hilbert space. Under suitable conditions, strong convergence theorems for approximating a common element of the above three sets are obtained.

• 대한전자공학회논문지
• /
• 제25권5호
• /
• pp.528-535
• /
• 1988

This paper presents a constructing theory of variable arithmetic operation systems for computing multiplications and multiplicative inverse in GF(2**m) based on a modulo operation of degree on elements in Galois fields. The proposed multiplier is composed of a zero element control part, input element conversion part, inversion circuit, and output element conversion part. These systems can reduce reasonable circuit areas due to the common use of input/output element converison parts, and the PLA and module structure provice a variable property capable of convertible uses as arithmetic operation systems over different finite fields. This type of designs gives simple, regular, expandable, and concurrent properties suitable for VLSI implementation. Expecially, the multiplicative inverse circuit proposed here is expected to offer a characteristics of the high operation speed than conventional method.

• 한국정밀공학회지
• /
• 제10권3호
• /
• pp.133-140
• /
• 1993

In this paper, we prpose a method for tracking optimally a spatial trajectory of the end-effector of flexible robot arms with multiple joints. The proposed method finds joint trajectories and joint torques necessary to produce the desired end-effector motion of flexible manipulator. In inverse kinematics, optimized joint trajectories are computed from elastic equations. In inverse dynamics, joint torques are obtained from the joint euqations by using the optimized joint trajectories. The equations of motion using finite element method and virtual work principle are employed. Optimal control is applied to optimize joint trajectories which are computed in inverse kinematics. The simulation result of a flexible planar manipulator is presented.