• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.9-9
• /
• 2018

• 한국산업보건학회지
• /
• 제3권1호
• /
• pp.110-126
• /
• 1993

Worker exposures to total chromium, hexavalent chromium (VI), sulfuric acid and alkaline dust at electroplating operations and worker exposures to trichloroethylene (TCE) and methyl chloroform (MCM) at degreasing operations in eleven small industrial plants were evaluated. Appropriate local exhaust ventilation systems for both operations were designed and recommended. Results of the study are summarized as follows ; 1. Out of 134 measurements for airborne hexavalent chromium concentrations, seven were exceeding the Korean occupational health standard of $50{\mu}g/m^3$ and 45 were exceeding the NIOSH standard of $1{\mu}g/m^3$. With an exception of one measurement, concentrations of total chromium were below the Korean standard of $500{\mu}g/m^3$. 2. Worker exposures to chromium were closely related to the existing control methods at the electroplating operations. Local exhaust systems, partial coverage of the tank surface, and antifoaming agents on liquid surface were adopted as control methods. 3. With an exception of one sample, airborne concentrations of sulfuric acid and alkaline dusts were below the applicable occupational heatlth standards. 4. Three plants indicated that airborne concentrations of TCE and MCM were exceeding the Korean standards. Other plants showed lower concentrations than the standards. It should be noted that generally, the activities and workloads on the day of surveys were less than normal. 5. Since the most existing ventilation systems did not satisfy the ACGIH criteria, the ventilation systems should be improved. Some examples for designing appropriate ventilation systems are presented.

• 한국산업보건학회지
• /
• 제3권1호
• /
• pp.68-77
• /
• 1993

To evaluate efficiencies of the local exhaust systems installed in chromiun and nickel eletroplating tanks, specifications of each tank and general performances of the local exhaust systems were measured in 16 electroplating plants from July 3 to November 24, 1992. Airborne concentrations of total chromium, hexa-chromium and nickel were also measured, Most of the local exhaust systems installed in electroplating plants were inadequately designed. Average capture velocities of local exhaust systems in chromium and nickel tanks were 0.45 m/sec and 0.29 m/sec. Average slot velocities in chromium and nickel tanks were 7.30 m/sec and 2.87 m/sec repectively. Both average capture and solt velocities were in noncompliance with the standards recommened by American Conference of Governmental Industrial Hygienists (ACGIH) and National Institute for Occupational Safety and Health (NIOSH), Exhausted air volume was insufficient in all local exhaust systems surveyed. Worker exposure levels to total chromium, hexa-chromium and nickel were $43.0{\mu}g/m^3$, $1.7{\mu}g/m^3$ and $9.3{\mu}g/m^3$, which were below the Korean Standard and U.S. Occupational Health and Safety Administration (OHSA) Permissible Exposure Limit(REL). However, Worker exposure level to hexa-chromium exceeded the NIOSH Recommended Exposure Limit(REL) of $1{\mu}g/m^3$. As the result of Scheffee's multiple comparions, worker exposure levels to all metals were significantly different between two groups by the management state of existing local exhaust systems (p<0.05). However, Difference between a group with local exhaust systems which were poorly managed and another group without local exhaust system was satatistically non-significant.

• 한국산업보건학회지
• /
• 제1권2호
• /
• pp.117-127
• /
• 1991

The exposure level of chromium and nickel for chrome and nickel plating workers were evaluated. Chromium and nickel concentrations in serum from 82 exposed workers and 66 controls, who were not exposed occupationally to metals, were analyzed by flameless atomic absorption spectrophotometry. The results were as follows : 1. The recovery percent of chromium and nickel concentrations in personal air samples were 95-108.2%, 88.0-107.7%, precisions (C.V., %) were 2.7-3.1%, 2.1-4.4%. respectively. 2. The recovery percent of chromium and nickel concentrations in serum were 93.6-106.4%, 91.3-107.9% and precisions (C.V. %) were 1.1-7.6%, 2.4-5.4% respectively. 3. The exposure level of chromium and nickel concentrations in the place of preparation process were $2.0{\pm}2.00{\mu}g/m^3$, chromplating were $35.7{\pm}53.07{\mu}g/m^3$, $2.8{\pm}3.42{\mu}g/m^3$, nickelplating were $4.6.0{\pm}5.8{\mu}g/m^3$, $18.62{\pm}4.41{\mu}g/m^3$, and covering were $2.9{\pm}2.02{\mu}g/m^3$, $1.1{\pm}0.47{\mu}g/m^3$ respectively. There were significant difference of concentrations for chromium and nickel in workplaces by groups statistically. 4. Chromium concentrations in serum of exposed group and control were $0.68{\pm}0.399{\mu}g/l$, $1.41{\pm}0.748{\mu}g/l$, respectively. There were significant difference of concentrations for chromium and nickel in serum by groups statistically. 5. Chromium and nickel concentrations in serum of exposed group were not significant by workplaces.

• Corrosion Science and Technology
• /
• 제5권5호
• /
• pp.168-172
• /
• 2006

Alloy 600 having a superior resistance to a corrosion is used as a steam generator tubing in nuclear power plants. In spite of its high corrosion resistance, there are many tubings which experience corrosion problems such as a SCC under the high temperature and high pressure environments of nuclear power plants. The Alloy 600 tubing can be repaired by using a Ni electroplating having an excellent SCC resistance. In order to carry out a successful Ni electrodeposition inside a steam generator tubing, the effects of various parameters on the material properties of the electrodeposit should be elucidated. Hence this work deals with the effects of an applied current density, duty cycle($T_{on}/(T_{on}+T_{off})$) of a pulse current, bath temperature and solution pH on the material properties of Ni electrodeposit obtained from a Ni sulphamate bath by analyzing the current efficiency, potentiodynamic curve, hardness and stress-strain curve. Hardness, YS(yield strength) and TS(tensile strength) decreased whereas the elongation increased as the applied current density increased. This was thought to be by a concentration depletion at the interface of the electrodeposit/solution, and a fractional decrease of the hydrogen reduction reaction. As the duty cycle increased, the hardness, YS and TS decreased while the elongation increased. During an off time at a high duty cycle, the concentration depletion could not be recovered sufficiently enough to induce a coarse grain sized electrodeposit. With an increase of the solution temperature and pH, the YS and TS increased while the elongation decreased. The experimental results of the hardness and the stress-strain curves can be supplemented by the results of the potentiodynamic curve.

• 한국산업보건학회지
• /
• 제5권1호
• /
• pp.1-7
• /
• 1995

The exposure levels of chromium and nickel for chromeplating workers were evaluated. Chromium and nickel concentrations in urine and serum from 82 exposed workers and 69 controls, who were not exposed occupationally to metals, were analyzed by flameless atomic absorption spectrophotometry. The results were as follows: 1. Chromium concentrations in urine of exposed group and control were $3.49{\pm}1.83g/g$ of creatinine, $5.59{\pm}2.83g/g$ of creatinine, and in serum were $0.69{\pm}0.30g/l$, $2.31{\pm}1.16g/l$ respectively. There were significant difference of concentrations for chromium in urine and serum by group respectively. 2. Nickel concentrations in urine of exposed group and control were $0.92{\pm}0.23g/g$ of creatinine, $2.20{\pm}1.93g/g$ of creatinine, and serum concentrations were $0.52{\pm}0.34g/l$, $1.41{\pm}0.74g/l$ respectively. There were significant difference of concentrations for nickel in serum by groups statistically. 3. Chromium and nickel concentrations in urine and serum of exposed groups were not significant by workplaces(grinding, electroplants, packaging).

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.37-37
• /
• 2012

The coated steels, mainly with zinc by either hot-dip galvanizing or electroplating, are widely used for panels of automotive, electrical appliances and construction, whose size of world market have reached 130 million tons in 2008. Current issues for the coated steels can be integrated in terms of high functionality, low cost, environment-friend and available resource. The best solution can be provided if thin layer coating with higher quality is produced by an eco-friendly process, and PVD, physical vapor deposition, can be an alternative practice to existing coating processes. PVD technologies have been very common ones in electronic and semiconductor industries, but recognized as non-profitable processes for the coated steels due to low process speed and lack of continuous operation skills. Systematic researches from 1990s in Europe, even though discouraged by a shutdown of the first Japanese PVD coating plant in 1999, have realized several continuous PVD coating plants, and also enhanced launching of developments in steel industries. To be successful with PVD coating technologies over existing ones, productivity to meet economics should be created from a highly sophisticated process. Some PVD technologies fit for the high-speed process will be introduced together with experiences from industrial applications.

• 한국산업보건학회지
• /
• 제16권3호
• /
• pp.245-253
• /
• 2006

We evaluated the relations among exposure and urinary levels of Cr, folate, vitamin $B_{12}$ and Hcy levels in the workers chronically exposure to Cr. Subjects were 104 male employees, 65 workers exposed to Cr in 9 electroplating plants and 39 office workers who had never been occupationally exposed to hazardous substances including Cr. The geometric mean(GM) of Cr in workplace was $0.069{\pm}0.101mg/m^3$ and urinary Cr was $0.483{\pm}0.394mg/g$ creatinine and airborne Cr concentration was significantly correlated to the urinary concentration of Cr(r=0.900, p=0.000). The geometric mean concentration of urinary Cr in control group was $0.301{\pm}0.255mg/g$ creatinine. In comparing the workers exposed to Cr with controls, significantly higher mean plasma levels were found of Hcy($11.3{\pm}4.9$ vs $9.4{\pm}4.7{\mu}mol/{\ell}$, p=0.05), but vitamin $B_{12}$ levels ($181.8{\pm}68.7$ vs $216.0{\pm}64.3nmol/{\ell}$, p=0.01) was significantly decreased. Hcy concentrations correlated positively with airborne Cr concentrations(r=0.287, p=0.004) and urinary Cr concentrations(r=0.244, p=0.015) but folate concentrations correlated negatively with airborne(r=-0.234, p=0.020) and urinary Cr concentrations(r=-0.640, p=0.090), respectively. No correlations were observed between vitamin $B_{12}$, airborne and urinary Cr concentrations. Also, Hcy concentrations correlated positively with vitamin $B_{12}$(r=0.295, p=0.0020 and negatively with folate concentrations(r=-0.196, p=0.046). The various biological(i.e. age and serum indicates) or lifestyle factors(i.e. medication, smoking, alcohol and coffee intake), also taken into account as potential confounders, did not influence the correlations found. Thus, this study found evidence that Cr might be associated with elevated plasma levels of Hcy. Furthermore, elevated plasma levels of Hcy were significantly associated with folate and vitamin $B_{12}$ concentration.