• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.457-460
• /
• 1988

We present here a numerical solution for obtaining propagation characteristics including lossess for various modes of an multi-layered optical waveguide structure. The method is based on transmission line analogy. A comparison with other method shows the our results are accurate and simple.

• Journal of the Optical Society of Korea
• /
• 제13권2호
• /
• pp.234-239
• /
• 2009

This paper presents a theoretical and experimental investigation of the transmission and sensing characteristics of the biconically tapered cladded multimode fibers. The beam propagation method was used to examine the transmission characteristics with various structural parameters. The results show that the transmission of the biconically tapered cladded multimode fibers is sensitive to the mode of the input optical beam and the refractive index of the external medium. A refractive index sensor for the external medium was proposed based on the theoretical analysis, and its feasibility was demonstrated experimentally.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1543-1544
• /
• 2008

In this paper, we introduce a gaussian enveloped linear chirp signal that can change parameters for consideration of target material characteristics. Using the gaussian enveloped linear chirp signal, time-frequency domain reflectomety is able to detect fault location in power transmission line. we suggest design method of reference signal for power transmission line fault detection. This method is verified by locating fault in HIV low voltage power transmission line.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.66-69
• /
• 2000

In this paper, we propose a progressive transmission of a video using a 2$\times$2$\times$2 DCT First of all, the video data is transformed into multiresolution represented video data using a 2$\times$2$\times$2 DCT. Then. it is represented by a 3-D EZT(Embedded Zero Tree) coding fur the progressive transmission with a bit-rate scalability. The proposed progressive transmission algorithm needs much less computations and buffer memories than the higher-order convolution based wavelet filter. Also, since the 2$\times$2$\times$2 DCT requires independent local computations, parallel processing can be applied.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.39-40
• /
• 2007

In this Paper a transmission algorithm based on Zigbee Networks is proposed. The superframe of IEEE 802. 15.4 is applied to the transmission method of real-time mixed data (periodic data, sporadic data, and non real-time message). The simulation results show the real-time performance of sporadic data is improved by using the proposed transmission algorithm.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2006년도 추계학술대회 학술발표 논문집 제16권 제2호
• /
• pp.289-292
• /
• 2006

In this paper, a wireless control network based on IEEE 802.15.4 MAC protocol is proposed. The superframe of IEEE 802.15.4 is applied to the proposed wireless control network. The transmission and bandwidth management method are proposed for efficient transmission in the superframe. By these methods, the proposed wireless control network protocol is able to transmit three types of data (periodic data, sporadic data, and non real-time message), and guarantee real-time transmission within deadline.

• ETRI Journal
• /
• 제33권5호
• /
• pp.689-694
• /
• 2011

In this paper, we study scheduling schemes for two-user two-way wireless relaying systems. Two transmission modes are considered: point-to-point direct transmission and two-way amplify-and-forward relaying. An optimal scheduling scheme that opportunistically selects the best transmission mode for each user is proposed to minimize the sum bit error rate (BER). The performance lower bound of the optimal scheduling scheme is analyzed, and closed-form expression of the lower-bound BER is derived. However, for optimal scheduling, the scheduler requires the knowledge of channel state information (CSI) of all links. To reduce the feedback information of CSI, we also propose a suboptimal scheduling scheme that selects the transmission mode using only the CSI of two direct links. Simulation results show that there are 4 dB to 8 dB gains for the proposed optimal and suboptimal schemes over the fixed direct transmission and fixed two-way relayed transmission scheme. The performance gap between the optimal and suboptimal scheduling schemes is small, which implies a good trade-off between implementation complexity and system performance.

• 제어로봇시스템학회논문지
• /
• 제22권2호
• /
• pp.147-152
• /
• 2016

This paper proposes a new TPC (Transmission Priority Change) algorithm which is used to diagnose failures of a CAN (Controller Area Network) based network system for the oil tank monitoring. The TPC algorithm is aimed to increase the total amount of data transmission and to minimize the latency for an urgent message by changing transmission priority. The urgency of the data transmission has been determined by the conditions of sensors. There are multiple sensors inside of the oil tank, such as temperature, valve, pressure and level sensors. When the sensors operate normally, the sensory data can be collected through the CAN network by the monitoring system. However when there is a dangerous situation or failure situation happened at a sensor, the data need to be handled quickly by the monitoring system, which is implemented by using the TPC algorithm. The effectiveness of the TPC algorithm has been verified by the real experiments. In addition, this paper introduces a method that people can figure out the condition of oil tanks and also can perform the fault diagnosis in real-time by using transmitted packet data. By applying this TPC algorithm to various industries, the convenience and reliability of multiple sensors network system can be improved.

• ETRI Journal
• /
• 제41권1호
• /
• pp.117-123
• /
• 2019

This paper presents a tri-wideband bandpass filter (TWB-BPF) with compact size, high band-to-band isolation, and multiple transmission zeros (TZs). The proposed TWB-BPF is based on a multiple-mode resonator (MMR), which is interpreted by the method of the even- and odd-mode analysis technique. The MMR can excite 11 resonant modes, where the first two modes comprise the first passband, the next four modes form the second passband, and the last five modes are used to generate the third passband. In addition, 10 TZs are yielded to obtain high band-to-band isolation and wide stopband suppression characteristics up to $14.95f_{c1}$ ($f_{c1}$ is the center frequency of the first passband). To verify the proposed filter, a TWB-BPF with 3-dB fractional bandwidths (FBWs) of 37.4%, 43.5%, and 40.4% is designed, fabricated, and measured.

• 한국군사과학기술학회지
• /
• 제24권1호
• /
• pp.41-49
• /
• 2021

In electronic warfare, beamforming using multiple antennas is applied for effective transmission of electronic attack signals. In order to perform an electronic attack against multiple threats using the same frequency resource, it is necessary to apply a multi-beam transmission algorithm that has been studied in wireless communication systems. For electronic attacks against multiple threats, this paper presents an MMSE(Minimum Mean-Squared Error) beam-forming technique based on the prior location information of threats and an optimization method for power allocation. In addition, the performance of the proposed method is evaluated and received signals of multiple threats are compared and analyzed.