• Transactions on Electrical and Electronic Materials
• /
• v.9 no.4
• /
• pp.147-150
• /
• 2008

Porcelain suspension insulators aged for 1, 5 and 10 years on Korean transmission lines and new insulators are tested for autoclave expansion. The compressive strength of the insulators aged in an autoclave with conditions of $250\;^{\circ}C$ and at 20 atm for 30 minutes, was about $7.6\;kgf/mm^2$, which is close to that measured on insulators aged for 10 years in the field. From simulation results, the cement displacement changed linearly with temperature. At a temperature of $200\;^{\circ}C$, the shear stress was approximately $7\;kgf/mm^2$; a stress that is brought about by a 0.07 % expansion of the cement. It is evident that the cement would fracture at a 0.07 % expansion, because the cement has about 7 to $9\;kgf/mm^2$ flexure strength. A turning point in the shear stress with mechanical load occurred at 0.02 % cement expansion. From an analysis of the porcelain body it is shown that there is sufficient margin of strength to guard against fracture of the porcelain body even for a cement expansion more than 0.12 %.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.12
• /
• pp.1359-1364
• /
• 2014

IEEE 802.11p is a representative PHY/MAC layer standard in vehicular communications. The performance of IEEE 802.11p based communication systems has been measured in various criterions such as link setup time, error rate, and throughput for the case of one-to-one. In this paper, we measure the performance of IEEE 802.11p based communication systems in large capacity transmission. The performance of large capacity transmission is measured by considering the maximum 32 simultaneous transmission including one-to-one transmission. We consider two transmission schemes, i.e., broadcasting and unicasting, and the performance is represented as the receiving rate and throughput.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.3
• /
• pp.234-239
• /
• 2010

An inductive coupler, which feeds communication to the electric power transmission line, is required to establish Power Line Communication(PLC). The electro-magnetic property of magnetic core and design technology for coupler are very important to manufacture an inductive coupler for power transmission line. The magnetic core with superior electro-magnetic property was manufactured by using nanocrystalline alloy and an inductive coupler, which can operate at the maximum 2,000 A current, was designed and manufactured by establishment of current saturation, signal out winding, and electromagnetic simulation in this study. Communication speed of 14 Mbps in 600 meter communication distance of the real electric power transmission line was obtained by using the inductive coupler and application possibility of the inductive coupler for the electric power transmission line was certified.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.439-440
• /
• 2008

An inductive coupler, which feeds communication to the electric power transmission line, is required to establish Power Line Communication(PLC). The electro-magnetic property of magnetic core and design technology for coupler are very important to manufacture an inductive coupler for power transmission line. The magnetic core with superior electro-magnetic property was manufactured by using nano-crystalline alloy and an inductive coupler, which can operate at the maximum 2,000 A current, was designed and manufactured by establishment of current saturation, signal out winding, and electro-magnetic simulation in this study. Communication speed of 14 Mbps in 600 m communication distance of the real electric power transmission line was obtained by using the inductive coupler and application possibility of the inductive coupler for the electric power transmission line was certified.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.493-496
• /
• 2003

Transmittance and resistivity is investigated according to bending of ITO (indium tin oxide)film with four other multi-barrier film. Transmission data of ITO film with four ITO films showed there was about large 90% transmission above 550 nm wavelength at three multi-barrier structures. But, both -side hard coated structure showed relatively low 75% transmission above 550 nm wavelength. Also, resistivity change of four other multi-barrier film showed there was the lowest change at oneside hard coated structure. Subsequently, with result of resistivity change according to position, it was known the resistivity change of the center increased rapidly than that of the edge.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.3
• /
• pp.83-87
• /
• 2011

TCP works well in wired networks where packet losses mainly occur due to congestion in data traffic. In wireless networks TCP does not differentiate packet losses from transmission errors or from congestion, which could lead to degrade the network performance. Several methods have been proposed to improve TCP performance over wireless links. Among them the Snoop module working at the base station is the popular method. In this paper, it is shown that the performance of Snoop largely depends upon the transmission link errors and the amount of data traffic. Also, our research shows that the local retransmission timeout value of Snoop can affect throughput. From the simulation results we suggest how to effectively use the Snoop algorithm considering data traffic and transmission link errors. It is expected that the proposed adaptive method will contribute to improving the network performance reducing the burden of the processes for data traffic.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.9
• /
• pp.1528-1543
• /
• 2011

With increasing the using of wireless technologies in essential fields such as the medical application, this paper proposes different scenarios for the transmission of images over wireless networks. The paper uses the IEEE ZigBee 802.15.4 for applying the proposed schemes. It is a Wireless Personal Area Network (WPAN). This paper presents a novel chaotic interleaving scheme against error bursts. Also, the paper studies the proposed interleaver with the convolutional code with different constraint lengths (K). A comparison study between the standard scheme and proposed schemes for image transmission over a correlated fading channel is presented. The simulation results show the superiority of the proposed chaotic interleaving scheme over the traditional schemes. Also, the chaotic interleaver packet-by-packet basis gives a high quality image with (K=3) and reduces the need for the complex encoder with K=7.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.50-63
• /
• 2017

In the wireless sensor networks, a sensor node has limited resources such as battery or memory. Hence, the routing protocol used in the wireless sensor networks is required efficient use of resources. In this paper, the VAP(Virtual Address Protocol), ensures the shortest transmission path for data transmission between the sink node and sensor node, is proposed. The VAP is assigned each node virtual address and sub address related with its neighboring nodes. The shortest transmission path to the destination node will be choose by comparing to each other address of its neighboring node. The comparison with other existing routing protocol shows that transmission path and usage of memory resource are minimized. Also transmission delay time of data was reduced.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05c
• /
• pp.66-68
• /
• 2001

Recently polymer insulators are being used for outdoor high voltage applications. Polymer insulators for transmission and distribution line have significant advantages over porcelain and glass insulators, especially for ultra-high voltage(UHV) transmission lines. Their advantages are light weight, vandalism resistance and hydrophobicity. In this paper, distribution polymer suspension insulator has been designed and investigated electric field distribution by FEM.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.77-87
• /
• 2017

Even though current LTE/LTE-A mobile networks provide enough high data rate and low latency to support conventional wireless services, to support ultra-low delay services, such as virtual reality and remote control, in the next generation mobile communication network, it is required to provide very low delay about several ms. However, in the uplink transmission of the LTE/LTE-A system, the process of scheduling grant is required to obtain uplink resources for uplink transmission from the eNB. The process of granting uplink resources from eNB brings additional fixed latency, which is one of the critical obstacles to achieve low delay in uplink transmissions. Thus, in this paper, we propose a novel uplink transmission scheme called Cut-in uplink transmission, to reduce uplink latency. We provide the performance of the proposed uplink transmission scheme through simulations and show the proposed uplink transmission scheme provides lower uplink transmission delay than conventional uplink transmission scheme in LTE/LTE-A mobile networks.