• Journal of Sensor Science and Technology
• /
• v.23 no.4
• /
• pp.266-271
• /
• 2014

Chemical sensors are used in various industrial facilities such high-risk and prevent the leakage of substances, important in life and environmental protection and the safe use of industry, used for management. In particular, high-temperature environments such as power generation equipment of the rotating part due to leakage generated by the various oil, power plants Shut Down, fire, work environment (exposure to various chemical solution and gas leak) and various water, air and soil pollution causes. Thus, over the long term through various channels such as crops and groundwater contamination caused by the slow, serious adverse effect on the ecosystem. In this paper, synthetic lube oil and high pressure hydraulic fluid leakage and immediately detect a new Printed Electronic implementation of technology-based film-type sensors, and its performance test. Thus, industrial accidents and environmental pollution and for early detection of problems, large accidents can be prevented. Experimental results of the synthetic lube oil and high pressure hydraulic fluid solution after the contact time depending on the experiment and the oil solution of the sensor material of the conductive porous PE resistance value by a chemical reaction could be confirmed that rapid increase. Also implemented in the film-type oil sensor electrical resistance change over time of the reaction rate and the synthetic lube oil is about 2 minutes or less, the high pressure hydraulic fluid is less than about 1 minute was. Therefore, more high-pressure hydraulic fluid such as a low volatility synthetic lube oils are the resistance change and the reaction rate was confirmed to be the slowest.

• Biomedical Science Letters
• /
• v.14 no.1
• /
• pp.39-45
• /
• 2008

Inflammation is the complex biological response of injured tissues to harmful stimuli. A cascade of biochemical events propagates and matures the inflammatory response, involving the local vascular system, the immune system, and various cells within the injured tissue. The immune system is often involved with inflammatory disorders, demonstrated in both allergic reactions and some myopathies, with many immune system disorders resulting in abnormal inflammation. An Arbitrary Waveform Generator (AWG) is a piece of electronic test equipment used to generate electrical waveforms for the treatment of patients. The patients with gastritis and arthritis have been known to have a relatively favorable prognosis with AWG treatment. Accordingly, we examined the effects of AWG treatment in gastritis and arthritis animal model. The compound 48/80 was used to induce animal gastritis model. The tissue malone dialdehyde (MDA) and serum histamine levels, and the activity of superoxide dismutase (SOD) in stomach tissue were measured. The tissue MDA and serum histamine levels in AWG treated groups exhibited the decreased tendency compared with control group, whereas the tissue SOD activity was slightly increased. The Freund's complete adjuvant was used to induce animal arthritis model as well. The paw edema volume and the width of ankle joint were determined. The AWG treatment significantly decreased the paw edema volume after 5th day of treatment. Although further studies should be performed to confirm the effects of AWG treatment, present study suggest that AWG treatment might be used as a complementary treatment for the gastritis or arthritis treatment.

• Journal of Korea Water Resources Association
• /
• v.30 no.6
• /
• pp.587-595
• /
• 1997

Experimental study on unsaturated flow in the soil is important to understand the characteristics of the water flow. Measurement of unsteady-state water movement using the traditional equipment (e.g. tensiometer) has a problem that requires relatively a long response time. In this study a quick measurement method of soil water flow using TDR is introduced. TDR consists of an electronic function generator which generates a squared wave, and an oscilloscope which catches the reflected wave. The wave is reflected where both the impedance of the transmission line and the propagation velocity are changed. The water content can be obtained from the travel time measured by means of TDR because the dielectric constant is affected by the change of soil water content. From the result of TDR calibration. TDR measurement error for the oven dried soil was found to be less than 3.5%. This supports that TDR is a viable technique to measure the unsteady-state water movement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2005-2010
• /
• 2011

Since recently exhaust gas regulation for a non-road small engine as well as commercial vehicle engine has been enforced, a carburettor of a small engine should be replaced by an electronic fuel injection system. In this study, the spray characteristics of the 400cc gasoline small engine injector has been experimentally analyzed. Based on the experimental results, suitable injector for the small engine has been selected. Through the test rig measuring spray mass distribution, fuel distribution characteristics of 3 hole- and 6 hole-injector has been analyzed. Through the visualization equipment, injector spray angle, penetration length and spray width have been measured and analyzed. Considering spray characteristics and stability, 6 hole-injector is selected for the 400cc gasoline small engine.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3859-3865
• /
• 2010

Modeling a virtual reader and tags, the emulator system is realized by using a commercial signal generation device to make signal, a data collection equipment, and DSP board. By using a Virtual UHF RFID (860 ~ 960 [MHz]) reader/tags module, a developed RFID reader, protocol of tag, and properties of RF support to provide the way how to verify the suitability to international standards (ISO 18000-6 Type C, EPCglobal C1G2). In this paper, to implement a proposed model reader and tag model, Visual DSP is applied by using DSP board, composing the system's signal generators, signal analyzers and performance verification, the target readers or tags, RFID emulator control computesr and control programs.

• Journal of Navigation and Port Research
• /
• v.29 no.3 s.99
• /
• pp.269-274
• /
• 2005

Geodetic surveying using precise GPS equipment are used without analysis with a statistical verification of GPS observed value and it was preformed by necessity to integration projection of digital topographic map and nautical Chart for integration geographic information system construction. The purpose of this study proposes method that improve accuracy of GPS observed value and direction that integrally manage digital topographic map and electronic nautical chart in analyzing the boundary line error between digital topographic map and nautical Chart. For improvement of the precision of GPS observed value, the author studied precision-analysis of GPS observed value by geometric strength and variance factor in 3 control points used in GPS network adjustment. And like this, produce EDM measurement using this GPS observation results and compare the whole boundary point error when set digital topographic map and nautical chart by these boundary.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.1
• /
• pp.12-17
• /
• 2018

This study describes the design and implementation of Antenna for Digital Satellite Communication. The Antenna unit for SHF band consists of Reflector, Septom Polarizer, Feed Horn and Support Frame etc. Thought analysis of space environment before production, the possibility of the malfunction of equipment minimized and we designed a reliable Antenna through simulation for vibration and thermal analysis generated during the launch, and compared pre-simulation of main performance results to test results about main performances of Antenna after production. After fabricating the antenna, the maximum gain of the antenna main beam is 36.5dBi, which satisfies the requirement of 35dBi or more, and it also satisfies the requirement of -20dB for return loss of less than -24dB. Also, the isolation of the transmission and reception of the antenna is -22.6dB or less, which satisfies the requirement of -20dB or less. The antenna for digital satellite communication described in this paper can be used in the satellite field of geostationary earth orbit and low earth orbit requiring high reliability in the future.

• Journal of Advanced Navigation Technology
• /
• v.18 no.2
• /
• pp.128-133
• /
• 2014

This paper is the study of BNWAS based on TLC. The functionality of BNWAS and its operations are investigated through its international standard. But the BNWAS to be used currently in the ship have difficulty in monitoring. Several kinds of data are generated from many equipments in BNWAS, such as NMEA-0183 data or NMEA-2000. Although these data are mainly used for the safe navigation of ship, their usability may be enhanced if they are managed to control the BNWAS equipment with sensors. The purpose of this system is prevent the marine accidents on sailing voyages due to drowsiness of watchers. On Night sailing, watcher is collected the navigation information from multiple devices and he determines the safe operation of the ship through continuous monitoring.

• Journal of Advanced Navigation Technology
• /
• v.18 no.5
• /
• pp.445-454
• /
• 2014

In this paper, we introduce measures designed content for RTCA DO-160 F, Section 22 tests performed to verify the effects of indirect lightning and testing process of the test was carried out in the multi-purpose display certification process. This is referred to as indirect effects of lightning capability of an aircraft having electrical electronic equipment failure or damage to bring lightning induced voltages. In order to protect the avionics from lightning indirect effects of these aircraft are analyzing the effects of lightning strikes on aircraft and aircraft systems and interior design needs protection against the threat on their part. In this paper, we introduce RTCA DO-160 F, component selection process according to Section 22 category selection method and the selected level for determining the level of such measures for protection against lightning of multipurpose display for this aircraft. It also introduces the actual test process to confirm that the designed effectiveness of the selected part. We expect a good example of the lightning planned for future development of measures designed avionics through each step of the process introduced this.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.8
• /
• pp.1490-1494
• /
• 2006

Most network equipment is an embedded system designed to execute specific function. An embedded system is an electronic control system mixing hardware and software to execute only fixed function for the purpose of system, not confuter, performing diverse function for a wide use. Early embedded system executed only simple function, combining specific function with optimization, a micro size, and low power, but it has developed to meet complex and diverse system. The purpose of this study is to realize DHCP server based on embedded system. To achieve this, embedded Linux was ported in ez Bord-M01 mounted with Intel Strong ARM SA1110 processor, and ethernet-based network was constructed for network function. In this way, this study suggests embedded DHCP server where Window and Linux client hosts are dynamically configurated as network information by dynamically assigning network information in embedded board.