• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.3
• /
• pp.46-55
• /
• 2012

Recently, the concept of PES(Personal Environment Service) is being widely discussed on various standardization organizations such as ITU-R, ETSI, 3GPP, TTA and etc. The purpose of PES is to introduce the services which can dynamically, automatically and intelligently reconfigures the electronic, electrical, and mechanical equipment surrounding the user according to the user preferences included in a user's profile by using a smartphone embedding WPAN radio technologies such as bluetooth and WiFi. This research introduces an Android Platform-based PES system which consists of a PES app, PES devices and a PES server. A smartphone platform is Android 2.2(Froyo) version and 4 simulated PES devices were implemented by using Galaxy Tab. It has shown that the PES would be a killer application of M2M(Machine-to-Machine) or D2D(Device-to-Device) in the future and it would need to study how to update a user's profile based on analyzing user's behaviour for enhancing the PES user's satisfaction.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.203-211
• /
• 2013

UHF RFID tag designers usually ndde the chip impedance and read power sensitivity value obtained when a tag chip is mounted on a chip pad. The chip impedance, however, is not able to be supplied by chip manufacturer, since the chip impedance is varied according to tag designs and fabrication processes. Instead, the chip makers mostly supply the chip impedances measured on the bare dies. This study proposes a chip impedance and read power sensitivity evaluation method which requires a few simple auxiliary and some RF measuring equipment. As it is impractical to measure the chip impedance directly at mounted chip terminals, some form test fixture is employed and the effect of the fixture is modeled and de-embeded to determine the chip impedance and the read power sensitivity. Validity and accuracy of the proposed de-embed method are examined by using commercial RFID tag chips as well as a capacitor and a resistor the value of which are known.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.1 s.4
• /
• pp.75-83
• /
• 2004

This paper describes the design, fabrication, and measurement of a low side lobe antenna for RSE base station of the ETCS which is one of the ITS services. The antenna is installed on the gantry of road side and provides the wireless communication lint between vehicles and RSE. The required characteristics of ETCS base station antenna are low sidelobe and specific beam pattern by the road and install environment and installed place of OBU. To minimize the affects of multipath signal by reflection, Circular polarization is required. To get low sidelobe of antenna, array configuration and weighting factor by Taylor distribution in radiator elements are applied. The measured results of fabricated antenna are as follows; return loss of 130MHz by -10dB, an axial ratio of 2.6dB, and a gain of 17dBi. It is found that the measured beam patterns are similar to design results.

• Journal of the Korea Society for Simulation
• /
• v.26 no.4
• /
• pp.43-49
• /
• 2017

With the advances in and expansion of the semiconductor and display businesses in Korea the demand of the engineers in such fields is increasing. Keeping pace with the trend, the semiconductor courses in undergraduate not only include the newest technologies in addition to the fundamental theories but fabrication related technologies as well in order to produce engineers with practical knowledge. However, since semiconductor fabrication requires expensive equipment and materials in a clean room, laboratory class can't be provided in undergraduate. To overcome this limitation actual fabrication processes are recorded in video and played in class. In addition, 3D visualization of fabrication processes can be used.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.1
• /
• pp.147-151
• /
• 2017

Areas of concentrations that can be exploited at all times, such as gas reservoirs in crude oil tanks, are called zero zones. In order to use various equipment in Zone 0, an intrinsically safe certification must be obtained that can guarantee that sparks will not occur in nature. Most devices that acquire intrinsic safety certification are mostly simple single-component devices or devices. In this study, it was a very difficult process because we intend to acquire the intrinsic safety certification of an electronic circuit including an ultrasonic generator and a microcontroller in which hundreds of components are mounted on a PCB substrate. Through this study, we have been able to understand how to design a circuit for intricate intrinsic safety certification. and Using the results of this study, it will be easier to design intrinsically safe circuits when trying to develop a circuit that can obtain intrinsic safety certification.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.594-600
• /
• 2017

HVDC transmission systems can be configured in many ways to take into account cost, flexibility and operational requirements. [1] For long-distance transmission, HVDC systems may be less expensive and suffer lower electrical losses. For underwater power cables, HVDC avoids the heavy currents required to charge and discharge the cable capacitance of each cycle. For shorter distances, the higher cost of DC conversion equipment compared to an AC system may still be warranted, due to other benefits of direct current links. HVDC allows power transmission between unsynchronized AC transmission systems. Since the power flow through an HVDC link can be controlled independently of the phase angle between the source and the load, it can stabilize a network against disturbances due to rapid changes in power. HVDC also allows the transfer of power between grid systems running at different frequencies, such as 50 Hz and 60 Hz. This improves the stability and economy of each grid, by allowing the exchange of power between incompatible networks. This paper proposed to establish Korean HVDC technology through a cooperative agreement between KEPCO and LSIS in 2010. During the first stage (2012), a design of the ${\pm}80kV$ 60MW HVDC bipole system was created by both KEPCO and LSIS. The HVDC system was constructed and an operation test was completed in December 2012. During the second stage, the pole#2 system was fully replaced with components that LSIS had recently developed. LSIS also successfully completed the operation test. (2014.3)

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.48-55
• /
• 2016

Ambient-light sensor system, which changes the brightness of a display as ambient light change, was studied to reduce the power consumption of the mobile applications such as note PC, tablet PC and smart phone. The ambient-light sensor system should be integrated on a display panel to improve the complexity and cost of mobile applications, so the ambient-light sensor and readout circuit was integrated on a display panel using low-temperature poly-silicon thin film transistors (LTPS-TFT). We proposed the new compensation method to correct the panel-to-panel variation of the ambient-light sensors, without additional equipment. We designed and investigated the new readout circuit with the proposed compensation method and the analog-to-digital converter for the final digital output of ambient light. The readout circuit has very simple structure and control timing to be integrated with LTPS-TFT, and the input luminance ranges from 10 to 10,000 lux. The readout rate is 100 Hz, and maximum differential non-uniformity with 20 levels of the final output below 0.5 LSB.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.11
• /
• pp.503-510
• /
• 2014

With the development of electronic communication technology, the ship's navigational equipment is being digitized, and it has being studied touch-screen-based navigation user interface. However, due to the influence of environmental factors such as waves, it has a potential problem hazardous marine accident occurs due to incorrect operation, the systematic research in consideration of this be done do not. In this paper, we provide a user interface experimental model to verify the stability that takes into account the external environment of the touch-screen input on. Further, we simulated to verify that the interface of the touch screen, the effect of applying the input delay time and the size of the button is obtained through the experimental model proposed. It will be able to greatly contribute to studies of the interface robust touch screen user errors that can be analyzed by the experimental model is proposed to improve the ship, the overall system stability.

• Journal of Digital Convergence
• /
• v.13 no.10
• /
• pp.337-342
• /
• 2015

SMT is an equipment that picks up electronic components and does precise placing onto PCBs. In order to do this, it stops in front of a camera installed in the middle to go over vision inspection. And after that it is move for placing. There are 16 different types of routes in this process. This paper presents the fastest algorithm to place (sLa-Camera-pLb) among all these routes. In order to do this, instead of stopping in front of camera the object should move on while going over the vision inspection. Among all possible tracks, this thesis will provide algorithm to find out the fastest tracks to do vision inspection and placing. And as a result, this thesis have demonstrated that this method can save about 16% of time compared to going over inspection while the object is standing still through simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.6
• /
• pp.597-602
• /
• 2008

This paper examines the damage effect and delay time of CMOS integrated circuits device with coupling caused by high power microwaves. The waveguide and magnetron was employed to study the influence of high power micro-waves on CMOS inverters. The CMOS inverters were composed of a LED circuit for visual discernment. Also CMOS inverters broken by high power microwave is observed with supply current and delay time. When the power supply current was increased 2.14 times for normal current at 9.9 kV/m, the CMOS inverter was broken by latch-up. Three different types of damage were observed by microscopic analysis: component, onchipwire, and bondwire destruction. Based on the results, CMOS inverters can be applied to database to elucidate the effects of microwaves on electronic equipment.