• Carbon letters
• /
• v.15 no.4
• /
• pp.268-276
• /
• 2014

Recently, methods that usea carbon-based filler, a conductive nanomaterial, have been investigated to develop composite fillers containing dielectric materials. In this study, we added geometric changes to a carbon fiber, a typical carbon-based filler material, by differentiating the orientation angle and the number of plies of the fiber. We also studied the electrical and electromagnetic shield characteristics. Based on the orientation angle of $0^{\circ}$, the orientation angle of the carbon fiber was changed between 0, 15, 30, 45, and $90^{\circ}$, and 2, 4, and 6 plies were stacked for each orientation angle. The maximum effect was found when the orientation angle was $90^{\circ}$, which was perpendicular to the electromagnetic wave flow, as compared to $0^{\circ}$, in which case the electrical resistance was small. Therefore, it is verified that the orientation angle has more of an effect on the electromagnetic interference shield performance than the number of plies.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.1
• /
• pp.63-71
• /
• 2017

During the sea trial test, we discovered EMI(Electromagnetic Interference) between MIL-SATCOM parabolic antenna and ES(Electronic Warfare Support) omni antenna. Emitted side lobe of CW(Continuous Wave) from MIL-SATCOM raises the threshold level of ES omni antenna. Therefore detection rate of ES is decreased. To solve this problem, the path of side lobe of CW from MIL-SATCOM should be blocked using EMI shield. This paper presents the method how to calculate the size of EMI shield, material, and optimized deployment. The test of the EMI shield effect was performed on a surface ship. After installing EMI shield, EMI has been decreased significantly. This paper will provide a method how to design EMI shield and a way to verify the result.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.275-276
• /
• 2014

The electromagnetic wave shielding properties of the carbon coils with polyurethane composites were investigated in the frequency range of 0.25 ~ 1.5 GHz. The shielding effectiveness of the composite having the various-shaped carbon coils were measured and discussed according to the weight percent of the carbon coils in the composites with the thickness of the composites layers. We confirmed that the absorption was the main mechanism to shield the electromagnetic wave interference in the carbon coils composites.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.7
• /
• pp.1147-1155
• /
• 2000

The installation of wireless communication system for various services of ITS at 5.8 GHz generates mutual interference. The representative example, the sharing of frequency between DSRC system and ETC system is a cause of communication error or disturbance both sides or one side owing to mutual interference. As a solution, a Shield Plate, Antenna Directionality, Power Control is proposed, but these are not perfect solution, because a RSU doesn't have the information of position of interferer. This paper applies an adaptive array antenna which makes a gain for desired users, makes a null for interferer, to up-link, down-link of DSRC and ETC system. The analysis of BER performance shows the effect of reduced interference about 20 dB.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.341-342
• /
• 2006

A physical model for reduction of Electromagnetic Interference(EMI) or its predecessors, Radio Noise, Electrical Noise, or Radio-Frequency-Interference(RFI), is a rapidly expanding digital technology. It covers the frequency spectrum from DC to about 3 GHz EMI is the poisoner which does not allow radio, TV, radar, navigation, and a lot of electrical, electro-mechanical, and electronic and communication devices, apparatus and systems to operate compatibly in a common frequency spectrum environment EMI can result in a jammed radio, heart pacer failures, navigation errors and many other either nuisance or catastrophic events. Therefore, it follows that this spectrum pollution problem has reached international levels of concern and must be dealt with m proportion to the safety and economic impact Involved.

• Journal of Magnetics
• /
• v.19 no.3
• /
• pp.291-294
• /
• 2014

In this paper, we examine the electrical and magnetic properties of three different types of shield materials used for wireless power transfer systems: namely, FeSiAl-composite, NiZn-ferrite, and FeSi-amorphous types. The power transfer efficiency and resistance of an RX coil are measured, while varying the shield thickness. For all three types, a thicker shield provides better power transfer efficiency. Analysis of the measurements shows that the FeSiAl-composite type is suitable for systems with size limitation. In terms of magnetic properties, the FeSi-amorphous type shows the best features, and is suited to high power applications. This work can be used as a guideline to select suitable shielding material in various wireless power transfer systems.

• Journal of Aerospace System Engineering
• /
• v.16 no.6
• /
• pp.18-23
• /
• 2022

This paper examines the electromagnetic shielding structure of ultra-high frequency (UHF) RF modules used in aircraft. Advances in electrical and electronic technologies have increased the need for electronic equipment in aircraft. High-frequency wireless devices have become integrated circuits in the form of UHF integrated circuits to support a wide range of frequencies and miniaturisation. To ensure the functionality and performance of these integrated devices in aviation, shielding is necessary to prevent unexpected electromagnetic interference, which could be detrimental to aircraft safety. A shield structure was designed to protect the RF chipset from malfunctioning, and the shielding effectiveness was improved through the application of various geometric shapes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.554-560
• /
• 2013

This study proposes an structure that fixes the shielding device to two parts of the board by its two arranged clips. Said structure evenly distributes its loading/unloading load of the board and maintains the flatness of soldering area of the board. The structure of this study comprises a base part fixed to a printed circuit board and a clip part fixing a side wall of a shield can to the board, wherein the clip part is constituted with two clips fixable to two part of the shield can. Also, the structure of this study comprises a dented groove in order to easily solder the base part of clips and the printed circuit board. A mechanism is established and a design parameter was determined by a structure analysis and a vibration mode analysis. A single purpose machine for the production of the product was developed, the final workpiece was produced and the measuring-data and the computered-data was compared and reviewed.

• Journal of Powder Materials
• /
• v.21 no.2
• /
• pp.124-130
• /
• 2014

The automotive industry is moving from the internal combustion engine to electric drive motors. Electric motors uses a high voltage system requiring the development of resources and components to shield the system. Therefore, in this study, we analyze electromagnetic interference (EMI) shielding effectiveness (SE) characteristics of an auto crash pad according to the ratio of electrically conductive materials and propylene. In order to combine good mechanical characteristics and electromagnetic shielding of the automotive crash pad, metal-coated glass fiber (MGF) manufacturing methods are introduced and compared with powder-type methods. Through this study, among MGF methods, we suggest that the chopping method is the most effective shielding method.

• Journal of electromagnetic engineering and science
• /
• v.6 no.1
• /
• pp.71-75
• /
• 2006

In this study, EM wave absorbers based on Au coated conductive sheets were prepared, and their reflection and transmission coefficients were investigated. An Au coated conductive sheet showed the transmission loss higher than 40 dB in $1{\sim}18$ GHz. Ba ferrite EM wave absorbers with an Au coated conductive sheet showed enhanced EM wave absorption and shield to compare with Ba ferrite EM wave absorbers without conductive sheets. Proposed EM wave absorbers with conductive sheets are useful to protect EM machines from EM interference by strayfields.