• 전력전자학회논문지
• /
• 제26권3호
• /
• pp.222-226
• /
• 2021

To comply with CE marking requirements, the electromagnetic compatibility (EMC) and low-voltage directive (LVD) tests are conducted on the sub-racks of International Thermonuclear Experimental Reactor (ITER) AC/DC converters and bypass switches. The EMC tests consist of a series of tests, including the electromagnetic interference test, the electromagnetic field immunity test, and the rapid transient burst immunity test. In the LVD test, the electric shock protection test, the xcessive temperature limit and heat resistance of equipment tests, and the fire spread prevention test are performed. This work presents and reviews the European Directive for EMC/LVD and introduces the methods of EMC and LVD tests for the sub-racks of AC/DC converters and bypass switches. It also evaluates the test method and results to meet the European Directive requirements for CE marking. The sub-racks of ITER AC/DC converters and bypass switches successfully pass the EMC and LVD tests.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1442-1444
• /
• 2000

High speed switching action of PWM inverter is being further advanced for electric motor vehicles. Due to this high speed switching action, extensive high frequency electromagnetic noise emerges. Therefore counterm-easures against electromagnetic interference of electric motor vehicles become increasingly important. This paper describes the theory and countermeasure principle of EMI prevention and EMI test method for Korean Standard EMU.

• 한국세라믹학회지
• /
• 제28권8호
• /
• pp.640-646
• /
• 1991

Recently intensive studies have been focussed on ferrites which have high magnetic loss because of the increasing need for the prevention of EMI (Electromagnetic Interference). We investigated effects of microstructures of Ni-Zn ferrites on magnetic losses, magnetic properties, and behaviors of electromagnetic wave absorbers. The characteristics of the absorber were influenced by the sintering conditions. A Ni-Zn ferrite with the thickness of 7$^{\circ}C$/min and the cooling rate of 7$^{\circ}C$/min. It satisfied the absorbing properties in the wide frequency ranges including VHF (90∼220 MHz), UHF (470∼770 MHz)

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.175-179
• /
• 2009

본 논문에서는 전장용 아날로그 스위치 및 공조기 부하 유닛의 신뢰성 실험 중에서 EMC 스펙에 만족할 수 있도록 하는 필터 설계를 제안한다. EMC 규격에 만족하면서 전자부품들의 상호 간섭과 주변 환경의 영향을 최소화하고 제품의 품질 향상을 위해 전자파 필터를 적용하였다. 본 논문에서는 ISO/JASO 표준규격의 주파수범위인 30MHz ~ 1GHz 대역에서 스펙트럼 분석기와 간이 EMI 챔버를 이용한 시뮬레이션을 통해 특정 주파수 대역의 에너지 분포를 분석하였으며, 최적의 전자파 필터를 구현하기 위해 필터를 구성하는 소자의 용량을 결정하였다. 실제 필터 추가를 통해 노이즈가 감소한 것을 공인인증기관에서 증명하였으며, 전장용 아날로그 스위치 및 공조기 부하 유닛에 적용하여 전자파 간섭을 일으키지 않고 정상적인 동작을 수행하는 것을 확인하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권1호
• /
• pp.84-93
• /
• 2001

An electromagnetic micro x-y stage for probe-based data storage (PDS) has been fabricated. The x-y stage consists of a silicon body inside which planar copper coils are embedded, a glass substrate bonded to the silicon body, and eight permanent magnets. The dimensions of flexures and copper coils were determined to yield $100{\;}\mu\textrm{m}$ in x and y directions under 50 mA of supplied current and to have 440 Hz of natural frequency. For the application to PDS devices, electromagnetic stage should have flat top surface for the prevention of its interference with multi-probe array, and have coils with low resistance for low power consumption. In order to satisfy these design criteria, conducting planar copper coils have been electroplated within silicon trenches which have high aspect ratio ($5{\;}\mu\textrm{m}$in width and $30{\;}\mu\textrm{m}$in depth). Silicon flexures with a height of $250{\;}\mu\textrm{m}$ were fabricated by using inductively coupled plasma reactive ion etching (ICP-RIE). The characteristics of a fabricated electromagnetic stage were measured by using laser doppler vibrometer (LDV) and dynamic signal analyzer (DSA). The DC gain was $0.16{\;}\mu\textrm{m}/mA$ and the maximum displacement was $42{\;}\mu\textrm{m}$ at a current of 180 mA. The measured natural frequency of the lowest mode was 325 Hz. Compared with the designed values, the lower natural frequency and DC gain of the fabricated device are due to the reverse-tapered ICP-RIE process and the incomplete assembly of the upper-sided permanent magnets for LDV measurements.

• 한국정밀공학회지
• /
• 제27권1호
• /
• pp.99-104
• /
• 2010

Magnesium and magnesium alloys, the lightest structural materials, have been received plenty of global attention recently. These alloys could be applied in various fields, especially the electronics industry, because of their excellent electromagnetic interference shielding. However, the welding technique of magnesium alloys has not been established. This study is related to the welding of AZ31B magnesium alloy by a short-pulsed a Nd:YAG laser. Two types of pulse waves, square pulse and variable pulse, were used to control weld defects. Results show that the crack and porosity, generated in the weld, had not been controlled by general square pulse. But through the application of variable pulse, the defects could be prevented and the good weld zone was obtained.

• Journal of Magnetics
• /
• 제19권3호
• /
• pp.291-294
• /
• 2014

In this paper, we examine the electrical and magnetic properties of three different types of shield materials used for wireless power transfer systems: namely, FeSiAl-composite, NiZn-ferrite, and FeSi-amorphous types. The power transfer efficiency and resistance of an RX coil are measured, while varying the shield thickness. For all three types, a thicker shield provides better power transfer efficiency. Analysis of the measurements shows that the FeSiAl-composite type is suitable for systems with size limitation. In terms of magnetic properties, the FeSi-amorphous type shows the best features, and is suited to high power applications. This work can be used as a guideline to select suitable shielding material in various wireless power transfer systems.

• 한국정보통신학회논문지
• /
• 제7권1호
• /
• pp.129-135
• /
• 2003

광섬유 센서의 주된 이점으로는 기계적 구동부가 없으므로 고신뢰성, 긴수명, 무전기적 간섭, 고응답속도, 저가이다. 본 연구에서는 공장설비 및 자동문 등과 같은 곳에서 많이 사용되어지는 자동장치의 오작동으로 인한 사고를 미연에 감지하여 인명피해를 줄이기 위하여 광섬유를 이용한 충격 및 압력센서를 제안 및 개발하였다. 센서의 원리로는 충격에 의해 다중모드 광섬유에서 발생하는 스펙클 패턴의 변화를 포토다이오드로 검출하는 방식이다. 광섬유에 충격의 세기를 변화하여 여러 차례 측정한 결과 충격의 세기의 변화에 따른 반응정도는 선형적으로 변하지는 않았으나 주어진 충격에 대해 민감하게 반응하는 것을 실험을 통하여 확인하였으며 광섬유의 피복 두께의 변화나 신호처리부에서의 증폭도를 조절함으로써 충격에 대한 반응감도를 조절할 수 있었다. 광섬유를 이용한 충격 및 압력센서의 장점으로는 점대점 방식이 아닌 라인 방식으로 설치하거나 측정함으로써 광섬유 전체가 센서역할을 하기 때문에 설치가 용이하고 감지범위가 넓어 센서로서의 우수한 특성을 가지므로 다양한 자동시스템 분야나 충격 및 압력센서로 활용될 수 있을 것이다.

• 한국안전학회지
• /
• 제19권3호
• /
• pp.51-56
• /
• 2004

Conductive polymer blends and composites are widely used for different safety application such as electrostatic charge dissipation(ESD), electromagnetic interference(EMI) shielding, electrostatic prevention and safety chemical sensor. In order to prepare a impedance-type humidity sensor that is durable at high humidities and high temperature, electically conductive polymer blends based on diallyldimethylammonium chloride(DADMAC) and epoxy were prepared in this study. The polymer blends type conductive ionomer exhibits reaction each other DADMAC and epoxy in FT-IR and DSC analysis. The blends material was traced by new peak at 1600cm-1 and appeard improvement of thermal resistance by melting point shift. Alumina substrate was deposited a pair of gold electrodes by screen printing. The blend material were spin-coated with a thin film type on the surface of alumina substrate. The polymer bleld type sensor exhibits a linear impedance increasing better than DADMAC coated humidity sensor. Also it shows good sensitivity, low hysteresis and durability against high humidity.