• Korean Journal of Remote Sensing
• /
• v.14 no.2
• /
• pp.117-128
• /
• 1998

Topex/Poseidon satellite, launched in Auguest 1992, has provided more 5 years of very good quality data. Efficient improvements, either about instrumental accuracy or about sea level data correction, have been made so that Topex/Poseidon has become presently a wonderful tool for many researchers. The first mission data of 73 cycles, September 1992 - August 1994, was used to our study in order to know characteristics of environmental correction factors in the Amsterdam-Crozet-Kerguelen region of the South Indian Ocean. According to standard procedures as defined under user handbook for sea surface height data processes, then we have chosen cycles 43 as the cycle of reference because this cycle has provided the completed data for measurement points and has presented the exacted position of ground track compared to another cycles. It was computed variations of various factors for correction in ascending ground track 103(Amsterdam-Kerguelen continental plateau) and descending ground track170 (Crozet basin). Here the variations of ionosphere, dry troposphere, humid troposphere, electromagnetic bias, elastic tide and loading tide were generally very smaller as a few of cm, but the variations of oceanic tide(30-35cm) and inverted barometer(15-30cm) were higher than another factors. For the correction of ocean tide, our model(CEFMO: Code d' Elements Finis pour la Maree Oceanique) - This is hydrodynamic model that is very well applicated in all oceanic situations - was used because this model has especially good solution in the coastal and island area as the open sea area. Conclusionally, it should be understood that the variation of ocean free surface is mainly under the influence of tides(>80-90%) in the Amsterdam - Crozet- Kerguelen region of the South Indian Ocean.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.2
• /
• pp.57-63
• /
• 2019

In order to facilitate the supply of gradually increasing power demand, it is also necessary to increase the number of power cables for power transmission as well as generation facilities. However, the expansion of electric power cables for supplying power to most urban areas requires a space for installation of additional cables, and the space for installing cables in domestic downtown areas is insufficient at present. The superconducting power cable, which can transmit more power with the same size, has emerged as an alternative to overcome the insufficient cable installation space. However, superconducting power cables, which have the advantage of large power transmission, have some losses in the AC (Alternating Current) system. Therefore, the design and analysis of AC losses are essential to introduce superconducting power cables in AC power transmission systems. In this paper, we analyze the AC loss of various superconducting power cables and consider the actual superconducting power cables and their application to the system. Although there is a theoretical calculation method of AC loss for single superconducting wire, it is not easy to calculate AC loss of superconducting power cable with large number. Therefore, the authors intend to analyze various kinds of superconducting power cable AC loss by using electromagnetic finite element analysis considering E-J (Electric field-Current density) characteristics of superconductivity. The analysis of the AC loss characteristics of the superconducting power cable will be an important factor in the design and development of the superconducting power cable to be applied to the actual system.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.6
• /
• pp.17-29
• /
• 2009

There has been an increase in the investigation of deep sea sediments with a consequent increase in the amount of energy required to undertake these investigations. The geotechnical characteristics of Ulleung Basin sediment are explored by using depressurized specimens following methane production tests carried out on pressured core samples obtained at 2,100 m water depth and 110 m below sea floor. Geotechnical index tests, X-ray diffraction, and scanning electron microscope are conducted to identify the geotechnical index parameters, clay mineralogy, chemical composition, and microstructure of the sediments. Compressibility, and elastic and electromagnetic wave parameters are investigated for two samples by using a multi sensing instrumented oedometer cell. The strength chatracteristics are obtained by the direct shear tests. The dominant clay minerals are mostly kaolinite, illite, chlorite, and calcite. The SEM shows a well-developed flocculated structure of the microfossil. Void ratio, electrical resistivity, real permittivity, conductivity, and shear wave velocity show bi-linear behavior with the effective vertical stress: as the vertical effective stress increases. The friction angle obtained by the direct shear test is about $21^{\circ}$, which is similar to the value observed in the Ulleung Basin sediments. This study shows that the understanding of the behavior acting on the diatomaceous marine sediment is important because it often maintains the useful energy resources such as gas hydrate and so will be the new engineering field in the next generation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.5 s.108
• /
• pp.461-475
• /
• 2006

In this paper, it is described about the tri-band mobile antenna system design to provide broadband multimedia and direct broadcasting services using goo-stationary Koreasat 3, simultaneously operated in Ka/K/Ku band. The radiating part of the antenna system with a fan beam characteristic in the elevation plane is composed of the quasi-offset dual shaped reflector and the tri-band feeder. The tri-band feeder is also composed of the Ka/K dual band feeder with the protruding dielectric rod, the circular polarizer, the ortho-mode transducer and the circular-polarized Ku band feed array. Especially, the Ka/K dual band circular polarizer was realized firstly using the comb-type structure. For fast satellite-tracking on the movement, the Ku band feed array has the structure of the $2{\times}2$ active phased array which can make electrical beams. And, the circular-polarized characteristic in the feed array was improved by $90^{\circ}$ rotating arrangement of four radiating elements polarized circularly by a $90^{\circ}$ hybrid coupler, respectively. Four beam forming channels to make electrical beams at Ku band are divided into the main beam channel and the tracking beam channel in the output, and noise temperature characteristics of each channel were analyzed on the basis of the contributions of internal sub_units. From the fabricated antenna system, the output power at $P_{1dBc}$ of Ka_Tx channel was measured more than 34.1 dBm and the measured noise figures of K/Ku_Rx channels were less than 2.4 dB and 1.5 dB, respectively, over the operating band. The radiation patterns with co- and cross-polarization in the tri-band were measured using a near-field measurement in the anechoic chamber. Especially, Ku radiation patterns were measured after correcting each initial phase of active channels with partial radiation patterns obtained from the independent excitation of each channel. The antenna gains measured in Ka/K/Ku band of the antenna system were more than 39.6 dBi, 37.5 dBi, 29.6 dBi, respectively. And, the antenna system showed good system performances such as Ka_Tx EIRP more than 43.7 dBW and K/Ku_Rx G/T more than 13.2 dB/K and 7.12 dB/K, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.667-678
• /
• 2002

In this paper, a new radiating structure with a multi-layered two-dimensional metallic disk array was proposed for shaping the flat-topped element pattern. It is an infinite periodic planar array structure with metallic disks finitely stacked above the radiating circular waveguide apertures. The theoretical analysis was in detail performed using rigid full-wave analysis, and was based on modal representations for the fields in the partial regions of the array structure and for the currents on the metallic disks. The final system of linear algebraic equations was derived using the orthogonal property of vector wave functions, mode-matching method, boundary conditions and Galerkin's method, and also their unknown modal coefficients needed for calculation of the array characteristics were determined by Gauss elimination method. The application of the algorithm was demonstrated in an array design for shaping the flat-topped element patterns of $\pm$20$^{\circ}$ beam width in Ka-band. The optimal design parameters normalized by a wavelength for general applications are presented, which are obtained through optimization process on the basis of simulation and design experience. A Ka-band experimental breadboard with symmetric nineteen elements was fabricated to compare simulation results with experimental results. The metallic disks array structure stacked above the radiating circular waveguide apertures was realized using ion-beam deposition method on thin polymer films. It was shown that the calculated and measured element patterns of the breadboard were in very close agreement within the beam scanning range. The result analysis for side lobe and grating lobe was done, and also a blindness phenomenon was discussed, which may cause by multi-layered metallic disk structure at the broadside. Input VSWR of the breadboard was less than 1.14, and its gains measured at 29.0 GHz. 29.5 GHz and 30 GHz were 10.2 dB, 10.0 dB and 10.7 dB, respectively. The experimental and simulation results showed that the proposed multi-layered metallic disk array structure could shape the efficient flat-topped element pattern.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.11
• /
• pp.21-34
• /
• 2017

The ground penetrating radar (GPR) signal can be measured with different amplitudes according to the directivity, so the directivity of the antenna should be considered. The objective of this study is to investigate the directivity of antenna by analyzing the reflection characteristics of electromagnetic waves radiated from the antenna, and to evaluate effective range of angle that can inspect an abnormal area according to the directivity of antenna. For the measurement of the directivity, a circular metal bar is used as reflector and the signals are measured by changing the angle and the distance between reflector and antenna in the E- and H-plane. The boundary distance between the near field and the far field is determined by analyzing the amplitudes of reflected signals, and two points with different distances from each of near and far fields are designated to analyze radiation patterns in near and far fields. As a result of radiation pattern measurement, in the near field, minor lobes are observed at angle section at more than $50^{\circ}$ in both E- and H-plane. Therefore, antenna has the directivity for the direction of main lobe and minor lobes in near field. In the far field, antenna has the directivity for a single direction of main lobe because minor lobes are not observed. The amplitude of the signal reflected from the near field is unstable, but it can be distinguished from noise. Therefore, in the near field, the ground anomaly can be detected with high reliability. On the other hand, the amplitude of the signal reflected from the far field is stable, but it is hard to distinguish between reflected signal and noise because of the excessive loss of electromagnetic wave. The analyses of directivity in the near and the far fields performed in this study may be effectively used to improve the reliability of the analyses of abnormal area.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.6
• /
• pp.155-166
• /
• 2016

It is important to configure capacitance(C) of the capacitor and the induction coefficient(L) of the work coil on the resonant circuit design stage in order to induce heating on the object by a precise and constant frequency components in the electromagnetic induction heating equipment. Work coil conducts a direct induction heating according to heating point and area of the object which has a fixed heat factor so that work coil is designed to has fixed value. On the other hands, Capacitor should be designed to be changed in order to be the higher the utilization of the entire equipment. It is extracted the samples by variation of single electrode capacity from the selection stage of raw materials for capacity to the stage of process design for output of the high frequency LC resonance of 700kHz on 1000 VAC maximum voltage and current to $200I_{MAX}$. It is suggested fundamental experiment results in order to prove relation for the optimal design of HF-LC resonance conduction-cooled capacitor based on the response of frequency characteristics and results of output parameters according to variation of the capacitance size.

• Journal of Korean Academy of Nursing
• /
• v.25 no.4
• /
• pp.729-740
• /
• 1995

The purpose of this study is to provide basic data for school health computerization by investigating the nurse teacher's attitudes toward school health computerization. For this study, the questionnaires were given to 559 nurse teachers from 3. March to 17. March, 1995. Among them, 338 were returned and included for the analysis. The results of the study were as follows : 1. In general characteristics, the results showed average of 38.6 years in age ; and average of 11.1 years in education experience. In distribution of school, the result showed 47.0% in elementary school, 30.5% in middle school and 22.5% in high school ; 75.4% national and public school vs 26.4% private school. 2. In attitudes of computerization, the score was varied from 19 to 76 point. The attitudes was generally positive with the average of 60.23±7.63(SD) score. The respondents are willing to participate in computer education(the highest score, 3.69), they worry about electromagnetic waves by computer (the lowest score : 2.30). 3. 92.6％ of the respondents want to participate in computer education. The major reason the respondents have not yet learned computer is that they had little chance to learn. While 58.0% of them answered that they had an experience of computer use in school health works, few schools had computer in dispensary. In computer use, nurse teachers in public school have more experience than ones in private school. Word processing was the major function that the most respondents can do(62.7%). They answered that they have little knowledge of computer (84.0%). 4. Computer can be utilized in school health works as follows in order : message from school to home, reports, annual plan and statistics. 65.4% of them answered that computer can be used in 10 items of 13 items. 5. The attitudes of computerization showed differences in the following variables career, age, existence of computer in school health clinic, experience of computer use, intention to participate in computer education, computer knowledge, frequent computer use, ability of computer use, school health computerization areas, experience of computer education. Among there variables, age, existence of computer in school health clinic, intention to participate in computer education, ability of computer use, school health computerization areas showed significant explanation(28.3%) for the attitudes of computerization in multiple regression analysis The younger. the higher degree of intention, the more functions they can perform, the more school health computerization areas, and the more computers in school health clinic, the more positive attitude on school health computerization. In conclusion, to achieve the successful computerization of school health works, the positive attitudes of nurse teachers should be encourged for school health computerization. For this purpose, the chance of computer education should be given as many times as possible. And administerial as well as financial support are essential for enlarging the knowledge and ability of computer.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.418-424
• /
• 2017

Magnesium has a higher specific strength than other metals and is widely used industry wide due to its excellent vibration absorption ability and electromagnetic wave shielding property.For example, it is used for automobile parts such as car seat frames and cylinder heads, and is widely used in electronic products such as notebook cases and mobile phone cases. In addition, it is in the spotlight as a bone-implant material used to assist in the treatment of damaged bones when the bones are cracked or broken. Currently, Ti alloy, stainless steel and Co-Cr-Mo alloy are used as the implant material, and the Mg alloy remains in research stage. The current problem with bone implant implants is that the patients must undergo reoperation to remove the implants after joint surgery. Magnesium, however, can achieve sufficient strength compared to current materials. In addition, since it is self-decomposed after the recovery, reoperation is not necessary. In this paper, Mg alloys were designed by adding harmless Ca and Zn to the human body. In order to improve the strength and corrosion resistance, the final alloy was designed by adding a small amount of Sr as a grain refiner. The radioactive elements of Sr are harmful to the human body, but other naturally occurring Sr elements are harmless. Microstructure analysis of the alloys was performed by optical microscopy and scanning electron microscopy. The mechanical properties and corrosion characteristics were evaluated by tensile test, potentiodynamic test and immersion test.

• Phonetics and Speech Sciences
• /
• v.5 no.1
• /
• pp.109-121
• /
• 2013

This study examined several kinematic properties of the primary articulator (the tongue dorsum) and the supplementary articulator (the jaw) in the articulation of the voiceless velar stop (/k/) within nonassimilating contexts. We examined in particular the spatiotemporal properties (constriction duration and constriction maxima) from the constriction onset to the constriction offset by analyzing a velar (/k/) followed by the coronal fricative (/s/), the coronal stop (/t/), and the labial (/p/) in across-word boundary conditions (/k#s/, /k#t/, and /k#p/). Along with these measurements, we investigated intergestural temporal coordination between C1 and C2 and the jaw articulator in relation to its coordination with the articulation of consonant sequences. The articulatory movement data was collected by means of electromagnetic midsagittal articulometry (EMMA). Four native speakers of Seoul Korean participated in the laboratory experiment. The results showed several characteristics. First, a velar (/k/) in C1 was not categorically reduced. Constriction duration and constriction degree of the velar (/k/) were similar within nonassimilating contexts (/k#s/=/k#t/=/k#p/). This might mean that spatiotemporal attributes during constriction duration were stable and consistent across different contexts, which might be subsequently associated with the nontarget status of the velar in place assimilation. Second, the gestural overlap could be represented as the order of /k#s/ (less) < /k#p/ (intermediate) < /k#t/ (more) as we measured the onset-to-onset lag (a longer lag indicated shorter gestural overlap.). This indicates a gestural overlap within nonassimilating contexts may not be constrained by any of the several constraints including the perceptual recoverability constraint (e.g., more overlap in Front-to-Back sequences compared to the reverse order (Back-to-Front) since perceptual cues in C1 can be recovered anytime during C2 articulation), the low-level speech motor constraint (e.g., more overlap in lingual-nonlingual sequences as compared to the lingual-lingual sequences), or phonological contexts effects (e.g., similarity in gestural overlap within nonassimilating contexts). As one possible account for more overlap in /k#t/ sequences as compared to /k#p/, we suspect speakers' knowledge may be receptive to extreme encroachment on C1 by the gestural overlap of the coronal in C2 since it does not obscure the perceptual cue of C1 as much as the labial in C2. Third, actual jaw position during C2 was higher in coronals (/s/, /t/) than in the labial (/p/). However, within the coronals, there was no manner-dependent jaw height difference in C2 (/s/=/t/). Vertical jaw position of C1 and C2 was seen as inter-dependent as higher jaw position in C1 was closely associated with C2. Lastly, a greater gap in jaw height was associated with longer intergestural timing (e.g., less overlap), but was confined to the cluster type (/kp/) with the lingual-nonlingual sequence. This study showed that Korean jaw articulation was independent from coordinating primary articulators in gestural overlap in some cluster types (/k#s/, /k#t/) while not in others (e.g., /k#p/). Overall, the results coherently indicate the velar stop (/k/) in C1 was robust in articulation, which may have subsequently contributed to the nontarget status of the velar (/k/) in place assimilation processes.