• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.1-5
• /
• 2000

As the semiconductor devices are miniaturized, the number of the unit cleaning processes increases. In order to processes by conventional RCA cleaning process, the consumption of volume of liquid chemical and DI water became huge. Therefore, the problem of environmental issues are evolved by the increased consumption of chemicals. To resolve this matter, an advanced cleaning process by Electrolyzed Water was studied in this work. The electrolyzed water was made by an electrolysis equipment which was composed of three chambers of anode, cathode, and middle chambers. In the case of electrolyzed water with electrolytes in the middle chamber, oxidatively acidic water of anode and reductively alkaline water of cathode were obtained. The oxidation/reduction potentials and pH of anode water and cathode water were measured to be +l000mV and 4.8, and -530mV and 6.3, respectively. The Si-wafers contaminated with metallic impurities were cleaning with the electrolyzed water. To analysis the amounts of metallic impurities on Si-water surfaces, ICP-MS(Inductively Coupled Plasma-Mass spectrometer) was introduced. From results of ICP-MS measurements, it was concluded that the ability of electrolyzed water was equivalent to that of the conventional RCA cleaning.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2004년도 추계학술대회
• /
• pp.99-102
• /
• 2004

Display process has adopted RCA clean, being applied to large area and coped with environmental issue for last ten years. However, the approaching concept of ozonized, hydrogenised, or electrolyzed water cleaning technologies is within RCA clean paradigm. In this work, only electrolyzed anode water was applied to clean particles and organics as well as metals based on Pourbaix concept, and as a test vehicle, MgO particles were introduced to prove the new concept. The electrolyzed anode water is very oxidative with high oxidation reduction potential(ORP) and low in pH of more than 900mV and 3.1, respectively. MgO particles were immerged in the anode water and its weight losses due to dissolution were measured with time. Weight losses were in the ranges of 100 to 500 micrograms in 250m1 anode waters depending on their ORP and pH. Therefore it was concluded that the cleaning radicals in the anode water was at least in the range of 1 to 5E20 ea per 250 ml anode water equivalent to IE18 ea/cm3. Hence it can be assumed that the anode water be applied to display cleaning since 1E10 to IE15 ea/cm3 ranges of contaminants are being treated. In addition, it was observed that anode water does not develop micro-roughness on hydrophobic surface while it does on the native silicon oxide.

• 한국산학기술학회논문지
• /
• 제6권1호
• /
• pp.78-82
• /
• 2005

디스플레이 세정의 개념은 기존의 반도체 세정인 RCA 세정을 근간으로 하고 있으며, 대면적화와 환경친화적인 관점으로 발전하여 왔다. 본 연구에서는 프베이 도표에 근거하여 전리수를 이용하여 입자를 제거할 수 있음을 예측하고 이를 확인하였다. 이 때 연구 대상으로 MgO 분말을 사용하였다. 사용된 전리수는 산화전위가 800 mV 이상이고 pH가 3.1으로 산화상이 강하였다 전리수에 용해되는 MgO 분말의 무게를 pH에 조사하였으며, 250 ml 전리수에 100-500 microgram 범위로 용해됨을 알 수 있었다. 이는 $1E18 ea/cm^3$정도의 용해 물질을 내포하고 있음을 의미하며, 따라서 $1E15 ea/cm^3$ 정도 수준의 불순물을 다루는 디스플레이 세정에 적용할 수 있음을 알 수 있었다. 특기할 것은 전리수는 반도체의 기판인 실리콘 웨이퍼의 자연산화막을 식각하여 표면거칠기를 증가시킴을 처음으로 관찰하였다.

• 청정기술
• /
• 제7권3호
• /
• pp.215-223
• /
• 2001

A present semiconductor cleaning technology is based upon RCA cleaning technology which consumes vast amounts of chemicals and ultra pure water(UPW) and is the high temperature process. Therefore, this technology gives rise to the many environmental issues, and some alternatives such as electrolyzed water(EW) are being studied. In this work, intentionally contaminated Si wafers were cleaned using the electrolyzed water. The electrolyzed water was generated by an electrolysis system which consists of three anode, cathode, and middle chambers. Oxidative water and reductive water were obtained in anode and cathode chambers, respectively. In case of NH4Cl electrolyte, the oxidation-reduction potential and pH for anode water(AW) and cathode water(CW) were measured to be +1050mV and 4.8, and -750mV and 10.0, respectively. AW and CW were deteriorated after electrolyzed, but maintained their characteristics for more than 40 minutes sufficiently enough for cleaning. Their deterioration was correlated with CO2 concentration changes dissolved from air. Contact angles of UPW, AW, and CW on DHF treated Si wafer surfaces were measured to be $65.9^{\circ}$, $66.5^{\circ}$ and $56.8^{\circ}$, respectively, which characterizes clearly the eletrolyzed water. To analyze the amount of metallic impurities on Si wafer surface, ICP-MS was introduced. It was known that AW was effective for Cu removal, while CW was more effective for Fe removal. To analyze the number of particles on Si wafer surfaces, Tencor 6220 were introduced. The particle distributions after various particle removal processes maintained the same pattern. In this work, RCA consumed about $9{\ell}$ chemicals, while EW did only $400m{\ell}$ HCl electrolyte or $600m{\ell}$ NH4Cl electrolyte. It was hence concluded that EW cleaning technology would be very effective for promoting environment, safety, and health(ESH) issues in the next generation semiconductor manufacturing.

• 청정기술
• /
• 제6권1호
• /
• pp.79-84
• /
• 2000

반도체 세정공정에서 사용되는 화학약품의 소모량을 줄이기 위하여 소량의 전해질 혹은 초순수만을 전기분해 시켜 생성되는 전리수를 이용하여 금속 불순물들이 오염된 실리콘 웨이퍼를 습식세정을 하였다. 전리수는 다양한 범위의 pH 및 산화환원전위(oxidation-reduction potential, ORP)를 형성할 수 있으며, 전리수의 양극수는 pH 및 산화환원전위를 각각 4.7 및 +1000mV의 산화성 수용액을, 전리수의 음극수는 pH 및 산화환원전위가 각각 6.3 및 -550mV를 40분 이상 유지하고 있었다. 실리콘 웨이퍼 세정 전과 후의 금속 불순물 측정은 ICP-MS(Inductively coupled plasma spectroscopy)를 사용하였다. 전리수 가운데 양극수는 구리 불순물 제거에, 음극수는 철 불순물 제거에 효과적임을 확인하였다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2001년도 춘계학술대회 발표논문집
• /
• pp.124-128
• /
• 2001

A present semiconductor cleaning technology is based upon RCA cleaning technology which consumes vast amounts of chemicals and ultra pure water(UPW) and is the high temperature Process. Therefore, this technology gives rise to the many environmental issues, and some alternatives such as functional water cleaning are being studied. The electrolyzed water was generated by an electrolysis system which consists of anode, cathode, and middle chambers. Oxidative water and reductive water were obtained in anode and cathode chambers, respectively. In case of NH$_4$Cl electrolyte, the oxidation-reduction potential and pH for anode water(AW) and cathode water(CW) were measured to be +1050mV and 4.8, and -750mV and 10.0, respectively. AW and CW were deteriorated after electrolyzed, but maintained their characteristics for more than 40 minutes sufficiently enough for cleaning. Their deterioration was correlated with CO$_2$ concentration changes dissolved from air. It was known that AW was effective for Cu removal, while CW was more effective for Fe removal. The particle distributions after various particle removal processes maintained the same pattern. In this work, RCA consumed about 9$\ell$chemicals, while EW did only 400$m\ell$ HCI electrolyte or 600$m\ell$ NH$_4$Cl electrolyte. It was hence concluded that EW cleaning technology would be very effective for eliminating environment, safety, and health(ESH) issues in the next generation semiconductor manufacturing.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2002년도 추계학술대회 발표 논문집
• /
• pp.117-119
• /
• 2002

A semiconductor cleaning technology has been based upon RCA cleaning which consumes vast amounts of chemicals and ultra pure water. This technology hence gives rise to many environmental issues, and some alternatives such as electrolyzed water are being studied. In this work, intentionally contaminated Si wafers were cleaned using the electrolyzed water. The electrolyzed waters were obtained in anode and cathode with oxidation reduction potentials and pH of -1050mV and 4.8, and -750mV and 10.0, respectively. The electrolyzed water deterioration was correlated with $CO_2$ concentration changes dissolved from air. Overflowing of electrolyzed water during cleaning particles resulted in the same cleanness as could be obtained with RCA clean. The roughness of patterned wafer surfaces after EW clean maintained that of as-received wafers. RCA clean consumed about $9\ell$ chemicals, while electrolyzed water clean did only $400m\ell$ HCl or $600m\ell$ $NH_4$Cl to clean 8" wafers in this study. It was hence concluded that electrolyzed water cleaning technology would be very effective for releasing environment, safety, and health(ESH) issues in the next generation semiconductor manufacturing.ring.

• 반도체디스플레이기술학회지
• /
• 제2권3호
• /
• pp.1-6
• /
• 2003

In the rapid changes of the semiconductor manufacturing technologies for early 21st century, it may be safely said that a kernel of terms is the size increase of Si wafer and the size decrease of semiconductor devices. As the size of Si wafers increases and semiconductor device is miniaturized, the units of cleaning processes increase. A present cleaning technology is based upon RCA cleaning which consumes vast chemicals and ultra pure water (UPW) and is the high temperature process. Therefore, this technology gives rise to environmental issue. To resolve this matter, candidates of advanced cleaning processes have been studied. One of them is to apply the electrolyzed water. In this work, electrolyzed water cleaning was compared with various chemical cleaning, using Si wafer surfaces by changing cleaning temperature and cleaning time, and especially, concentrating upon the contact angle. It was observed that contact angle on surface treated with Electrolyzed water cleaning was $4.4^{\circ}$ without RCA cleaning. Amine series additive of high pKa (negative logarithm of the acidity constant) was used to observe the property changes of cathode water.

• 한국재료학회지
• /
• 제11권4호
• /
• pp.251-257
• /
• 2001

반도체 소자의 고집적화에 따른 세정공정 수는 점점 증가하고 있는 추세에 있다 현재 사용되는 세정은 다량의 화학약품 및 초순수를 소비하며, 고온에서 행하여지고 있는 RCA세정을 근간으로 하고 있다. 세정공정수의 증가는 바로 화학약품의 사용량 증가를 초래하게 되며, 이에 따른 환경문제가 심각하게 대두되고 있는 실정에 이르렀다. 따라서 이러한 화학약품 및 초순수 사용을 절감하고, 저온에서 세정공정이 이뤄지는 기술이 향후 요구되어 지고 있다. 이번 연구는 이러한 관점에서 화학약품 및 초순수 사용량을 줄이며, 상온 공정이 이뤄지는 전리수를 이용하여 실리콘 웨이퍼 세정을 하였다. 제조된 전리수는 산화성 성질을 지닌 양극수와 환원성 성질인 음극수로 이루어지고, 각각 pH 및 ORP는 4.7/+1050mV, 9.8/-750mV를 30분 이상 유지하고 있었다 전리수의 양극수에 의한 금속제거 효과가 음극수의 효과보다 우수함을 확인할 수 있었으며, 다양한 입자제거 실험에도 불구하고, 동일한 분포도를 나타내고 있었다.

• 한국산학기술학회논문지
• /
• 제3권2호
• /
• pp.74-79
• /
• 2002

80년대 반도체 산업의 급격한 성장으로 오늘날 반도체 산업은 반도체소자의 초고집접화, 웨이퍼의 대구경화로 발전이 거듭났으며, 소자의 성능과 생산 수율의 향상을 위하여 실리콘 웨이퍼의 세정하는 기술 및 연구를 계속 진행하고 있다. 기존의 반도체 세정은 과다한 화학약품의 사용으로 비 환경친화적이며, 이에 본 연구에서는 기존의 세정방법을 대체하기 위한 방법으로 환경친화적인 전리수를 이용한 반도체 세정법을 하였다. 이때 실리콘 웨이퍼 표면의 원자적 상태의 변화가 발생하여 다양한 방법으로 확인할 수 있다. 본 연구에 서는 이러한 분석을 하기 위하여 기존세정의 화학약품과 전리수로 세정한 웨이퍼의 표면을 비교하였으며, 또한 온도 및 시간별 표면상태변화를 분석하였다. 특히 접촉각 변하에 중점을 두어 변화를 관찰하였으며, 음극수의 경우 17.28°, 양극수의 경우 34.1°의 낮은 접촉각을 얻을 수 있었다.