• 한국안전학회지
• /
• 제29권1호
• /
• pp.7-14
• /
• 2014

Inverter module, which feeds the converted power to the traction motor for EMU. Consists of the power semiconductors with their gate drive unit(GDU)s and the control computer for driving, voltage, current and speed controls. Electrolytic condenser, connected to the gate drive unit and a core component to drive the power semiconductor, has problems such as reduction in lifetime and malfunction caused by electrical and mechanical characteristic changes from heat generation during high speed switching for generation of stable power. In this study, To check the service life of electrolytic condenser, the test was carried out in two ways. First, In the case of accelerated life testing of condenser, the Arrhenius model is a way of life testing. Another way is to analyze the reliability of the failure data by the method of parametric data analysis. Eventually, life time by accelerated life test than a method of failure data analysis(Weibull distribution) was found to be slightly larger output.

• 전력전자학회논문지
• /
• 제16권5호
• /
• pp.448-456
• /
• 2011

최근 디지털 광원으로서 각광받고 있는 고출력 LED(Light Emitting Diode)는 저소비전력과 장수명 그리고 점 소등 속도도 빨라서 고출력 LED의 효율을 향상시켜 일반 조명용으로 사용하려는 노력이 두드러지고 있다. 본 논문에서는 온도변화에 따른 전압 변동분만을 출력 콘덴서에 저장함으로서 출력 측에 사용하던 전해 콘덴서를 전압용량이 작고 수명이 긴 MLCC(Multi-Layer Ceramic Capacitor) 사용이 가능한 LED 구동 드라이브를 제안하고자 한다. 제안된 LED 구동 드라이브는 기존의 부스트 DC/DC 컨버터의 기본 토폴로지에서 출력 콘덴서를 입력 전원과 직렬로 연결하여 LED 광원의 온도변화에 따른 전압 변동분만을 출력 콘덴서에 저장함으로서 출력 콘덴서로 기존수명이 낮은 전해 콘덴서 대신 전력 손실이 적고 수명이 긴 MLCC 사용이 가능하게 된다.

• 한국표면공학회지
• /
• 제22권2호
• /
• pp.62-68
• /
• 1989

Pb2+ ino, added in ctching sohing, is electrodeposited on a alumiunm foil for electrolycic condenser to promote its capacitance. In addition, several factoral factors in etching process are varied to examine how they change the capacitance of the condenser. The capacitance of the condenser made of 0.1 ppm pb electrodeposited aluminum foil is enhanced about 20% than of conventional ane. It is thought out that the enhanement is the result of the act of PbO2, which existed for the conveting of electrodeposited Pb, as a promoter tunnel etching of aluminum foil.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1996년도 창립기념 전력전자학술발표회 논문집
• /
• pp.109-112
• /
• 1996

In this paper, we composed utility interactive photovoltaic generation system of current source inverter, and controlled that low harmonic and high power factor are hold by supposing control and compensation method which is concerned with synchronous signal distortion and modulation delay. And we put parallel resonant circuit into dc link, so, magnitude of direct reactance was reduce by restraining direct current pulsation which had accumulation of pulsating power in alternating electrolytic condenser. Also we controlled that modulation factor is operated around maximum output of solar cell.

• 한국표면공학회지
• /
• 제25권3호
• /
• pp.150-157
• /
• 1992

A recovery process of pure alumina powder from the wasted aluminum etching solution of electrolytic condenser works was studied. The possibility of this process was considered in the basis of thermodynamic data nad physico-chemical properties for the recovered materials were tested. In order to obtain pure alumina, Fe3+ and Cu2+ in the solution as impurities were solvent-extracted, respectively, and then, Al3+ was precipitated by changing the pH of the solution. As the results, more than 99.9% of Al3+ in the solution was recovered by the precipitation method. The weight of the precipitate was reduced to about 65 wt.% of the original one by calcination and the sizes of the recovered powders were in order of 3-5$\mu\textrm{m}$. The precipitates were transformed to $\alpha$-Al2O3 at the calcination temperature about 120$0^{\circ}C$.

• 한국안전학회지
• /
• 제28권2호
• /
• pp.26-30
• /
• 2013

The purpose of this study is to find risk factors by analyzing the operation principle of a photo coupler (P/C) used to remove the noise of electronic devices and establish a base for the performance improvement of developed products. It was found from the P/C circuit analysis of normal products that they were equipped with an electrolytic condenser of $0.1{\mu}F$ to smooth system signals. Due to the epoxy resin packing the external part of the P/C, this study experienced a limit to visually examine the damage to it. It could be seen from the analysis of electric characteristics of the P/C that the forward voltage ($V_f$) and reverse current ($I_r$) were 1.3 V and 10 uA, respectively. In addition, it is required that the breakdown voltage (VCE) between the collector (C) and emitter (E) be maintained at less than 35 V. The and of the damaged product #1 were comparatively good. However, the measurement of was 100.0 uA. From this, it is thought that a short circuit occurred to the internal circuit. Moreover, from the fact that the of the damaged product #2 was open circuit and the measurement of was 0.0 uA, it is thought that the collector and emitter was separated or insulation resistance was significantly high. Furthermore, from the fact that the of the damaged product #3 was open circuit and the measurement of was 0.0 uA, it is thought that the space between the collector (C) and emitter (E) failed to meet the design standard or that they were separated. Therefore, it is thought that fabricating the P/C by increasing the reverse current 10 mA to 50 mA will prevent its malfunction.