• 마이크로전자및패키징학회지
• /
• 제13권3호
• /
• pp.1-8
• /
• 2006

인쇄회로기판이나 플라스틱 패키지 등 다양한 전자소자 부품내 배선간 간격이 갈수록 좁아짐에 따라 최근 많이 발생하고 있는 electrochemical migration(ECM) 현상은 양극에서 이온화된 금속에 의한 conductive anodic filament(CAF) 및 덴드라이트와 같은 전도성 필라멘트의 성장으로 인해 전자부품의 절연파괴를 일으키고 있다. 본 연구에서는 공정조성 Sn-37Pb솔더 합금의 ECM 거동과 부식특성 사이의 연관성 평가를 통해 ECM 우세원소를 파악하기 위해 D.I Water 및 NaCl 용액에서 Water Drop Test(WDT)와 분극실험을 실시하여 서로 비교하였다. WDT 실시 결과 공정조성 Sn-37Pb 솔더 합금에서 Pb-rich 상이 Sn-rich 상보다 우선적으로 양극 패드에서 녹아나서 상대적으로 ECM 저항성이 낮았으며, 음극패드에서 자라난 덴드라이트에도 Pb가 훨씬 많이 존재하였다. NaCl에서의 분극실험 결과 전기화학적으로 부동태 피막을 형성하는 Sn에 비해 Pb의 부식속도가 크게 나타났으며, WDT의 결과와 같은 경향을 보였다. 따라서 공정조성 SnPb 솔더 합금의 부식저항성과 ECM 저항성 사이에는 좋은 상관관계가 존재한다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.61-74
• /
• 2014

전자제품에서 반도체 부품의 협피치화가 진행됨에 따라 PCB의 회로와 회로 사이의 간격 혹은 Hole과 Hole간의 간격이 줄어듬에 따라 ECM(Electrochemical Migration)과 CAF(Conductive Anodic Filament)의 불량이 증가하게 되었다. 특히 열악한 환경에서 사용되는 Power Supplier나 사용전압이 높아지는 전기 및 수소연료 자동차 분야에선 이들 불량방지에 노력을 기울여야겠다.

• 마이크로전자및패키징학회지
• /
• 제12권2호
• /
• pp.167-174
• /
• 2005

전자 부품의 크기가 점점 줄어들고 고집적화됨에 따라 전자 패키지 내부에 사용되는 금속간 간격이 줄어들고 있다. 이에 더하여 고온 고습한 환경에서 금속간에 전압이 인가되면 금속의 이온화가 촉진, 금속으로 이루어진 필라멘트가 형성되어 결국 절연파괴에 이르게 된다. 이러한 현상이 electrochemical migration(ECM)이다. 이에 인쇄회로기판을 사용하여 ECM 특성 평가를 수행하였다. 항온/항습조건($85^{\circ}C,\;85{\%}RH$)에서 PCB의 $300 {\mu}m$의 단자간격을 가진 through-hole via 표면에서 발생하는 ECM 현상은 CAF가 절연파괴의 주된 메커니즘이었다. solder를 구성하는 Sn과 Pb 조성 분석을 통해 Pb 의 이온 이동도가 Sn의 이온 이동도보다 큰 것을 알 수 있었으며 이는 급격한 양극용해 거동을 보이는 pure Pb의 분극거동과 상관관계가 있는 것으로 사료된다. 또한 시간에 따른 절연파괴시간 시험을 통하여 ECM에 의한 절연파괴시간이 인가전압에 의존하며 인가전압 의존성 지수값(n)은 2로 나타났다.

• Corrosion Science and Technology
• /
• 제22권3호
• /
• pp.153-163
• /
• 2023

Two types of accelerated tests, Water Drop Test (WDT) and Temperature-Humidity-Bias Test (THBT), can be used to evaluate the susceptibility to electrochemical migration (ECM). In the WDT, liquid water is directly applied to a specimen, typically a patterned conductor like a printed circuit board. Time to failure in the WDT typically ranges from several seconds to several minutes. On the other hand, the THBT is conducted under elevated temperature and humidity conditions, allowing for assessment of design and life cycle factors on ECM. THBT is widely recognized as a more suitable method for reliability testing than WDT. In both test methods, localized corrosion can be observed on the anode. Composition of dendrites formed during the WDT is similar to that formed during THBT. However, there is a lack of correlation between the time to failure obtained from WDT and that obtained from THBT. In this study, we investigated the relationship between electrochemical parameters and time to failure obtained from both WDT and THBT. Differences in time to failure can be attributed to actual anode potential obtained in the two tests.

• 대한안전경영과학회지
• /
• 제15권1호
• /
• pp.109-120
• /
• 2013

As information-oriented industry has been developed and electronic devices has come to be smaller, lighter, multifunctional, and high speed, the components used to the devices need to be much high density and should have find pattern due to high integration. Also, diverse reliability problems happen as user environment is getting harsher. For this reasons, establishing and securing products and components reliability comes to key factor in company's competitiveness. It makes accelerated test important to check product reliability in fast way. Out of fine pattern failure modes, failure of Electrochemical Migration(ECM) is kind of degradation of insulation resistance by electro-chemical reaction, which it comes to be accelerated by biased voltage in high temperature and high humidity environment. In this thesis, the accelerated life test for failure caused by ECM on fine pattern substrate, $20/20{\mu}m$ pattern width/space applied by Semi Additive Process, was performed, and through this test, the investigation of failure mechanism and the life-time prediction evaluation under actual user environment was implemented. The result of accelerated test has been compared and estimated with life distribution and life stress relatively by using Minitab software and its acceleration rate was also tested. Through estimated weibull distribution, B10 life has been estimated under 95% confidence level of failure data happened in each test conditions. And the life in actual usage environment has been predicted by using generalized Eyring model considering temperature and humidity by developing Arrhenius reaction rate theory, and acceleration factors by test conditions have been calculated.

• Corrosion Science and Technology
• /
• 제6권6호
• /
• pp.282-285
• /
• 2007

Smaller size and higher integration of electronic systems make narrower interconnect pitch not only in chip-level but also in package-level. Moreover electronic systems are required to operate in harsher conditions, that is, higher current / voltage, elevated temperature / humidity, and complex chemical contaminants. Under these severe circumstances, electronic components respond to applied voltages by electrochemically ionization of metals and conducting filament forms between anode and cathode across a nonmetallic medium. This phenomenon is called as the electrochemical migration. Many kinds of metal (Cu, Ag, SnPb, Sn etc) using in electronic packages are failed by ECM. Eutectic SnPb which is used in various electronic packaging structures, that is, printed circuit boards, plastic-encapsulated packages, organic display panels, and tape chip carriers, chip-on-films etc. And the material for soldering (eutectic SnPb) using in electronic package easily makes insulation failure by ECM. In real PCB system, not only metals but also many chemical species are included. And these chemical species act as resources of contamination. Model test systems were developed to characterize the migration phenomena without contamination effect. The serpentine-shape pattern was developed for analyzing relationship of applied voltage bias and failure lifetime by the temperature / humidity biased(THB) test.