• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1457-1459
• /
• 2004

Tilting trains are now an established feature of railway operations throughout the world. For intercity traffic, tilt provides operators with increasing speeds, and therefore enhanced competitiveness, on existing routes where insufficient traffic or a lack of funds precludes the construction of a dedicated new high-speed railway. Appling the tilting train, we can expect $30\%$ of speed up on existing lines, but the stability of the electric current would be low because of tilting the train. Also, the spark between the catenary and pantagraph cause environmental problems such as noise, radio wave malfunction. Therefore, the tilting on pantagraph for the power suppling device is very essential for stable electric power supply.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1343-1345
• /
• 2004

The inherent pulsating force generation makes the control of switched-reluctance motor quite complicate. So in this paper, an orthogonal scheme that can be applied to the control of LSRM will be presented. By using this scheme, the motor reluctance forces, which are magnetically decoupled and position dependent, can be projected onto sets of stationary axes that are aligned with the motor fixed secondary poles. Hence the electromagnetic forces can be controlled not only for driving the LSRM at its propulsive direction but also for alleviating the load at its normal direction. Simulation results will be provided to show the validity of the proposed scheme.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.908-910
• /
• 2004

Disabled people have benefited greatly from the developments in technology over the last twenty years. Systems have been developed and refined to help them overcome, or cope with, difficulties they experience as a result of their disabilities. As technology has become cheaper, more powerful and easier to use, disabled people have taken to using them to an ever increasing degree. In this paper, we propose novel hybrid mobility devices which use a combination of human power and electric power. This paper deals with the design of a direct-drive wheel Axial-flux permanent magnet motor. This type motor prove to be the best candidate for application in electric vehicles, as in comparison with conventional motors they allow design with higher compactness, lightness. A prototype vehicle for an application as a hybrid wheelchair is designed, built, and tested.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1429-1431
• /
• 2004

경량전철의 무인운전을 위한 무선제어 신호 시스템 중에서 열차 제어정보 처리를 위한 무선데이터 전송시스템을 개발하였다. 개발된 시스템은 각각 중앙운용시스템, 지상무선중계시스템 및 개별차량운용시스템으로 구성된다. 무선데이터 네트웍은 2.4GHz 대역의 확산스펙트럼 방식의 주파수 호핑 라디오 모뎀을 사용하여 전용망을 구성하였으며 1초 이내에 무선망 내에 위치하는 모든 무선데이터 전송시스템과 정보를 교환하도록 설계되었다. 현재 실험실 테스트를 완료하고 새로이 건설된 전용 시험선에서 그 유효성을 테스트 중에 있다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.3
• /
• pp.227-234
• /
• 2020

This paper presents the methods for the modeling and parameter optimization of the electric vehicle battery. The state variables of the battery are defined, and the test methods for battery parameters are presented. The state-space equation, which consists of four state variables, and the output equation, which is a combination of to-be-determined parameters, are shown. The parameter optimization method is the key point of this study. The least square of the modeling error can be used as an initial value of the multivariable function. It is equivalent to find the minimum value of the error function to obtain optimal parameters from multivariable function. The SIMULINK model is presented, and the 10-hour full operational range test results are shown to verify the performance of the model. The modeling error for 25 degrees is approximately 1% for full operational ranges. The comments to enhance modeling accuracy are shown in the conclusion.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3101-3104
• /
• 1999

It is important to detect objects movement for obstacle recognition and path searching of autonomous robots and vehicles with vision sensor. This paper shows the method to draw out objects and to trace the trajectory of the moving object using a CCD camera and it describes the method to recognize the shape of objects.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1918-1920
• /
• 2005

PZT(20/80) and PZT(80/20) powders, prepared by the sol-gel method, were mixed with an organic vehicle and the PZT(20/80)/PZT(80/20) heterolayered thick films were fabricated by the screen-printing method on $Pt/Al_2O_3$ substrates. The structural properties such as DTA, X-ray diffraction and microstructure, were examined as a function of the sintering temperature. In the DTA analysis, the formation of the polycrystalline perovskite phase was observed at around $880^{\circ}C$. The average thickness of the PZT heterolayered thick films was approximately $80-90{\mu}m.$

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1323-1326
• /
• 1996

This paper describes an air conditioner control method using a fuzzy control theory. The fuzzy control method was implemented with Philips 80C552 one chip microcomputer and tested in an actual vehicle. Experiments showed that proposed control method is superior to the conventional PID control method especially in the environments with abrupt disturbance and parameter variation of the control system. Fuzzy-Based control method was proved to maintain a stable and improved temperature control in an abrupt environmental changes.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.952-954
• /
• 2003

This paper deals with design of Synchronous Reluctance Motor with conventional laminated rotor for driving an air conditional compressor in a vehicle. To design both stator and rotor, design parameters, such as laminated axial length, rotor diameter, resistance and inductance are considered. The design variables are selected to get the highest power by analyzing the characteristics. The current angle in which torque is maximum is accomplished by finite element method(FEM).

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1291-1293
• /
• 2003

The korean high speed train (350km/h), composed of 7cars that are 2 power cars, 2 motorized car and 3 trailer cars, has been developed and is under on-line test. To verify the design requirements about the functions and traction performances of this train, KRRI(Korea Railroad Research Institute) decided to evaluate traction performances of the train during on-line test. For this purpose, such as torque, velocity, voltage and current, must be measured. KRRI has developed the measurement system that can be measured vast and various signals effectively. In this paper, we introduce traction performances of korean high speed train. The traction measurement items are focused on the verification of motor block performances. Motor block are consist of 2 motor. For this test, we verified traction performances of korean high speed train.