• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.01a
• /
• pp.105-106
• /
• 2014

본 논문에서는 통행 시간의 측정 방법 중 하나인 CCTV를 활용한 주행 차량 조사법을 이용하여 교통량을 측정한다. 교통망의 서비스 수준을 측정하는 주요 기준인 통행 시간과 지체 시간에 대하여 알아본다. 신호등 간격이 넓어서 연속적인 교통류 특성을 갖는 곳에서 측정을 하도록 한다. 반대편의 교통류가 충분히 식별 가능한 구간이어야 하고, 구간의 끝부분에서는 유턴이 가능해야 한다. 이 방법은 측정차량의 운전수만 있으면 CCTV와 프로그램이 알아서 측정하고, 시간, 거리, 교통량을 기록할 수 있는 장비도 필요 없다.

• Journal of Applied Reliability
• /
• v.17 no.2
• /
• pp.136-142
• /
• 2017

Purpose: In this paper, we propose a test method for evaluating the life time of the inverter which is one of the main internal configuration systems in order to evaluate the life time of the power supply for the vehicle. Methods: The performance and failure criteria required for the development of the accelerated life test method were established and the Taguchi method was used to derive the stress factors affecting performance and reliability. Results: The major stress of the product degradation were considered to be high temperature. Conclusion: The acceleration factor was estimated through a two-level high temperature test and a test methods was designed to guarantee the accelerated life time of the inverter.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.811-815
• /
• 2005

Traditional passive suspension has limitations to meet the required specifications of high level trains, and so Active suspension system is proposed to meet the requirements with active components which could be controlled by external signal for optimized behavior of train. Active suspension is to be divided by Full active suspension and Semi-active suspension whether using the external power source or not, and though the performance of Semi-Active suspension is worse than Full one. Semi-active suspension is focused with its effectiveness per cost. Semi-Active suspension system consists of sensors, ECU (electrical control unit), and variable damper, which are to be designed to be fit for train system. And the software of ECU is to be developed for to be suited to its dynamic behavior through simulation result calculated by proven model. In this experimental study, the hardware and software of semi-active suspension system is to be realized and its performance for improvement of ride quality to be confirmed through roller rig test.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.1056-1062
• /
• 2005

This paper describes the results of structure analysis and load test of a bogie frame. The purpose of the test is to evaluate the safety and functionality of the bogie frame under maximum load. The bogie system consist of the bogie frame, suspensions, whee/sets, a brake system and a transmission system. Of these components, the bogie frame is the major component subjected to the vehicle and passenger loads. The evaluation method used the JIS E 4207 specifications throughout static load test. The test results have shown the bogie frame to be safe under design load conditions.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.131-136
• /
• 2002

Performance test is carried out in accordance with "performance test standard for Electrical Multiple Unit", noticed by Ministry of Construction ＆ Transportation in 2000. The object of this standard is to ensure that vehicle is tested after completion and before entry into service. Performance test is classified by type test to be carried out for the first car and its components in order to verify their performance and by routine test to be carried out on the whole quantity in order to prove the performance of individual items. Scope of the test is divided by components, completed car, preliminary adjustment test and running test on main line. The paper introduces a testing procedure and an execution method of the performance test.

• Proceedings of the KIEE Conference
• /
• 2007.04b
• /
• pp.134-137
• /
• 2007

LMTT(Linear Motor-based Transfer Technology) 시스템은 항만 컨테이너 이송장치의 자동화 시템으로 기술적 포화상태에 이른 AGV (Automated Guided Vehicle)의 대체 수단으로 제안되었다. 본 논문에서는 PMLSM (Permanent Magnetic Linear Synchronous Motor)을 기본 구조로 한 LMTT에서 발생할 수 있는 레일과 차체간의 인척력 변화와 다양한 부하 중량에 대한 시스템 내부 변수의 변동에 적응할 수 있는 제어기 설계에 초점을 두었다. 그렇게 됨으로써 제어시 큰 방해요소로 작용하는 마찰력에 의한 백래쉬 및 데드존을 최소화하여 속응성 및 정밀도를 향상시키고자 하였다.

• Journal of the Korean Society of Safety
• /
• v.27 no.6
• /
• pp.31-42
• /
• 2012

Urban transit vehicle that uses electrical energy, is faster, safer and energy-efficient public transit than other means. As a Research method, the Matlab/Simulink are used to modeling a regenerative brake-capable train, and actual parameters such as powering and braking characteristics, all kinds of resistance, passenger load, velocity, gradient, radius of curve etc and powering and breaking commands per time or distance are inputted to train's dynamic equation, then a simulation program is made and used to yield train driving pattern and driving time and the amount of driving energy used thereby at auto and manual operation and at all sector.

• Journal of Power Electronics
• /
• v.4 no.2
• /
• pp.96-101
• /
• 2004

This paper presents an application of SRM drive for LSEV(Low Speed Electric Vehicle). In this paper, a 5〔㎾〕 SRM for a traction of a LSEV is to design and investigate the characteristics of the drive system. The main design parameters and control strategy are given. In the control method, a current control, for the soft-starting technique at a starting operation, is adopted. In the high speed range, an angle control technique is implemented, for a high efficiency drive of SRM. Some experimental tests are executed to find the drive performances.

• 전기의세계
• /
• v.28 no.6
• /
• pp.61-77
• /
• 1979

This paper is concerned with minimization process of the binary logic function. This paper describes an algorithm called the SIMPLE TABLE METHOD that well suited to minimization a switching function of any number of variables. For the Simple Table construction, a theorem based upon the numerical properties of the logic function is derived from the relationships governing minterms of the given function. Finally the minimal sum of products can be obtained in terms of the Direct Method or the Indirect Method from the table and table characteristics derived from the Simple Table. The properties and table characteristics used in this paper are described. All the minterms of a switching function are manipulated only by decimal numbers, not binary numbers. Some examples are used as a vehicle to guide the readers who are familiar with the Karnaugh map and Quine-McCluskey tabular method to this New method. These examples not only treat how to handle Don't Care miterms but also show the multiple output functions.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1310-1312
• /
• 2004

현재, 고속철도차량의 국내기술확보를 위해 한국형 고속전철이 개발되어 단품시험, 완성차시험, 공장시험 등을 통해 기본적인 성능을 확인한 후 현재는 본선시운전 시험을 실시하고 있다. 시제차량의 성능 및 기능을 종합적이고 효율적으로 확인하기 위해 고속철도 시운전시험시 상시 계측시스템을 시제차량에 설치하여 운영하고 있다. 본 논문에서는 상시계측시스템을 이용하여 보조전원장치에 대한 성능평가와 고장진단을 실시한 것에 대하여 연구하였다.