• 디지털융복합연구
• /
• 제16권2호
• /
• pp.441-449
• /
• 2018

본 연구는 캠핑장 안전사고에 대비한 행동 매뉴얼을 체계화하기 위한 연구다. 이를 위해 안전사고의 유형을 분석하고, 캠핑장 관련 법규 및 안전 기준을 검토했다. 이론적 검토를 통해서 문제점을 진단하고 등록기준 개선의 요소를 제시했다. 결국 '대비 행동 매뉴얼'의 체계화를 위해 예방 행동 매뉴얼과 대응 행동 매뉴얼의 일부를 개발했다. 구체적으로 살펴보면 안전사고 예방 행동 매뉴얼의 예는 첫째, 질식, 둘째, 교통사고, 셋째, 화재, 넷째, 전기사고로 구분했다. 사고 발생 빈도가 높은 사고별 이니셜로 "S.A.F.E."라는 구체적 행동 매뉴얼의 사례를 만들었다. 이에 세부적인 사항을 제시함으로써 사용자 입장에서 체계적 개발을 위한 구체적인 안을 제시했다. 또한, 안전사고 유형별 예방 행동과 대응 행동의 매뉴얼을 게시하는 것에 그치지 않고, 사용자가 숙지했다는 확인과정이 필요함을 강조했다. 후속연구로는 캠핑장 안전과 관련된 사례연구, 안전 관리 지표 개선, 캠핑장 관리자 및 안전요원의 전문성에 대한 연구를 제언했다.

• International Journal of Safety
• /
• 제9권2호
• /
• pp.35-40
• /
• 2010

Many casualties are being occurred due to many misses the railway platform, and the accident occurrence is being increased. Recently in Korea, efforts to prevent casualties fundamentally are being made by installing and operating the PSD(Passenger Screen Door) as to prevent these casualties of passengers. However, in case of the PSD system, although it can solve the problem of public casualties at platform fundamentally, it is impossible to install it at whole railway platforms. This paper proposes the safety equipment using LaserRadar sensor for the prevention against casualties of passengers at platform. The safety equipment using novel sensor is the safety equipment making an approaching train stopped if the falling object is a person by detecting the obstacle at platform, and it has the merit possible to apply it to platform since it may detect accurately under ambient environmental elements such as the snow, rain and yellow dust, etc. also. We manufactured a prototype of the safety equipment to reduce public casualties at platform by using LaserRadar sensor and carried out its performance test, and the result is presented in this paper.

• 전기학회논문지
• /
• 제66권6호
• /
• pp.995-1000
• /
• 2017

In this paper, we present an electrical arc detection algorithm using the mash-up analysis technique which is the core technology for the autonomous electrical safety management system(AESMS) of the multi-unit dwellings. The mash-up analysis technique analyzes the voltage, load current, zero phase current data simultaneously to judge arc faults. In order to develop the arc fault detection algorithm, the characteristics of series arc and parallel arc were analyzed. Also, we propose the mash-up analysis technique that analyzes waveforms of voltage, load current, and zero phase current at the same time. The arc fault detection algorithm was developed using the mash-up analysis technique. The developed algorithm can prevent electrical disasters in an effective way through accident prediction, and it will be used as a basic technology to introduce an autonomous electrical safety management system.

• 전기학회논문지
• /
• 제65권11호
• /
• pp.1937-1942
• /
• 2016

Unlike oil immersed transformers, cast-resin transformers have the solid insulator 'epoxy resin' in sealed structure. Therefore, they reveal a lot of limitations in checking aging conditions and predicting an accident. This study analyzed the characteristics of Cast-resin transformers by the measurement distance and measurement sensitivity with a corona defect sample, using antenna sensor. Therefore, the experiment has proven that the antenna sensor-based measurement method proposed in this study is able to detect the insulation defect location of the cast-resin transformer, unlike conventional measurement methods. It is expected that the result of this study will be used to develop a new type of measuring method in order to measure insulation defects and to use in safety inspection of domestic cast-resin transformers.

• 한국안전학회지
• /
• 제35권1호
• /
• pp.116-129
• /
• 2020

Resilience is defined as the intrinsic ability of a system to adjust its functioning prior to, during, or following changes and disturbances, so that it can sustain required operations or functions with the related systems under both expected and unexpected conditions. Resilience engineering is a relatively new paradigm for safety management that focuses on how to cope with complexity under pressure or disturbance to achieve successful functioning. This study aims to develop a quantitative resilience model for severe accident response organizations of nuclear power plants using the Analytic Hierarchy Process (AHP) method. First, we investigated severe accident response organizations based on a radiation emergency plan in the Korean case and developed a qualitative resilience model for the organizations with resilience-influencing factors, which have been identified in the author's previous studies. Then, a quantitative model for entire severe accident response organizations was developed by using the Analytic Hierarchy Process (AHP) method with a tool for System Dynamics. For applying the AHP method, several experts who are working on implementing, regulating or researching the severe accident response participated in collecting their expertise on the relative importance between all the possible relations in the model. Finally, a sensitivity analysis was carried out to discuss which factors have the most influenceable on resilience.

• International Journal of Safety
• /
• 제4권2호
• /
• pp.18-23
• /
• 2005

There are many electrical connections in the electric apparatus and most fires due to a fault contact result from a failure or misuse of electric apparatus and installation. The fault contact happens between electrical connections by the loose and the mechanical vibration. In this paper, we have investigated thermal and electrical properties of screwed electric contacts due to the mechanical vibration. The exciter was connected to a signal generator and power amplifier that provided the vibration frequency and amplitude. The vibration, temperature and voltage data were sent to a data acquisition system (DAQ). In the case that fault contact took place, the arc happened between the screwed electric contact and electric wire, heat due to the arc was transmitted to the adjacent insulators, for which the oxide could be generated more. In addition, a spark was generated and the insulator began to melt. Thus, the possibility of electrical fire became the highest in this case. Finally, when the fault contact takes place due to vibration, the hazard of an electric accident is very high.

• 한국안전학회지
• /
• 제24권6호
• /
• pp.32-38
• /
• 2009

According to the statistics from the Ministry of labor, 70~80 people died by work-related electric shock accidents in the workplace and this number is about 10~20 times higher than those of the foreign countries such as Japan and the United Kingdom in frequencies and rates per 100,000. The electrocution deaths had decreased from several hundred in 1990s to 67 in 2002, since then there has been little change over the last 5 years. To reduce this number of the electrocution death, it is necessary to analyze the sources of the accidents and to implement the suitable measures for preventing the similar accidents from occurring. But there is not any consensus standard method or procedures for accident investigation yet. And the results solely depend on the ability of the investigator. Because of the demand of eliminating technical barrier for free trading, the IEC 60364 is adopted as a regulation for low voltage electrical installations in Korea. The facilities designed and constructed by IEC 60364 are increasing. The facilities by IEC 60364 have different features in comparison with the facilities by Korea eletro technical regulation, and these features combined with parameters of electric shock accident can greatly affect the consequences of the electric accidents. The accident analysis program for electric shock injuries in Terra Neutral(TN) and Terra Terra(TT) system was developed in this paper, which was based on KOSHA Electric Shock Analysis Program(ESAP).

• 한국안전학회지
• /
• 제31권5호
• /
• pp.177-186
• /
• 2016

When an event is occurred in a nuclear power plant (NPP), the NPP operator reports it referred by the regulation on reporting and public announcement of accidents and incidents. Some of the events do not need to be reported because they are not included in the reporting criteria of the regulation. However, it is necessary that they should be managed effectively because the accident can be occurred by the recurrence of a lot of them as precursors. Among the events not included in the reporting criteria of the regulation, near miss is the event that is not occurred but can generate a significant consequence. This can provide the cause of the event which does not result an accident. So, it is able to offer insightful knowledges to prevent higher level events about the function and process of NPP. The objective of this study is to analyze the issues of near miss events, prepare the defence against the risk, and improve the management process of NPP. To achieve it, this study performed to analyze the management structure and status of near miss events as well as the accident reporting system of the domestic and foreign regulation bodies. In case of Korea, the status was analyzed by quantitative data, licensee event reports and procedures. Based on these, we could find the causes that near miss events were not managed effectively. Then, systematic alternatives that reflected the perspective of man, technology and organization were drawn.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.999-1001
• /
• 2005

School electricity facility is different to general electricity facility because use of immature students. But it was design, construct, manage of general electricity facility law realistically In this study, investigate the recent electrical accident data of school and the present status of electricity facility in Chonan. And grope for future directions of school electricity facility.

• 대한안전경영과학회지
• /
• 제20권3호
• /
• pp.21-26
• /
• 2018

This paper describes result of a study on safety against a fire of charging cable for mobile phone for vehicle. Combustion on the USB cable in the car was happened while driving. Gas coming from the burning USB cable could be a reason which can make a secondary car accident since the driver also can be embarrassed while driving. In order to prevent a secondary car accident connected on the road, to research a reason why USB cable can emit gas and be burned in charging. We did simulation test with abnormal fault condition for the electronic component on the board in the USB cable. So we get the result from abnormal fault condition simulation test, for instance, shorted test for output terminal of 8 pin switch, shorted test for chip resistor after thermal aging in the condition $25^{\circ}C$, 93 % RH during 48 hours. To analysis the result of all test, Combustion on the USB cable was not the 8 pin but other electrical component such as a chip resistor. Therefore we guess that the reason for USB cable combustion in charging in a car was not 8 pin and a LED but another defective component.