• 한국항공우주학회지
• /
• 제41권10호
• /
• pp.820-826
• /
• 2013

본 논문에서는 스마트 스킨 기술을 활용한 소형경량 및 광대역 특성을 갖는 항공기용 안테나 내장 스킨 구조(CLAS: Conformal Load bearing Antenna Structure)를 설계하였다. 제안된 CLAS 안테나는 전기적 성능을 만족하기 위해 전도성 매쉬, 외부표피, 복사소자, 내부심재 및 하우징 등으로 구성하였다. 특히, 복사소자의 경우 복합자성유전체와 PCB에 에칭된 방사체로 구성되어 있으며 방사체는 복합자성유전체에 삽입되어 슬롯형 폴디드 대수주기 구조(Folded Log-Periodic)를 갖는다. 제안된 CLAS 안테나는 복합자성유전체에 의해 공진주파수가 낮아지고 임피던스 매칭특성이 향상되었으며 측정 결과, 안테나의 소형경량 및 광대역 특성을 확인하였다.

• 전력전자학회논문지
• /
• 제18권1호
• /
• pp.10-17
• /
• 2013

In this paper, a new active damping method of LCL filter without capacitor voltage sensors is proposed for 3 phase PWM Inverter. Normally, L filter or LCL filter is used as an output filter of grid connected PWM inverter. An LCL filter has more excellent performance than L filter to reduce harmonic current, so the small inductance value can be used. However, the resonance problem in LCL filter is happen due to the zero impedance by the addition of LC branch. To solve the resonance problem, the various active damping method has been proposed so far. Generally, the virtual resistor active damping methods is required to additional hardware sensors for measurement of capacitor voltage and current. In this paper, the new active damping method is proposed without any capacitor voltage or current sensors. In the proposed method, the resonance component of the capacitor voltage of LCL filter can be observed by a simple MRAS(Model Reference Adaptive System) observer without additional hardware sensors, and this component is suppressed by feedforward compensation. The validity of the proposed method is proven by simulation and experiment on the 3-phase PWM inverter system.

• 대한의용생체공학회:의공학회지
• /
• 제31권4호
• /
• pp.292-301
• /
• 2010

To restore visual sensation of blind patients, we have proposed a fully implantable retinal prosthesis comprising an three dimensionally (3D) stacked retinal chip for transforming optical signal to electrical signal, a flexible cable with stimulus electrode array for stimulating retina cells, and coupling coils for power transmission. The 3D stacked retinal chip is consisted of several LSI chips such as photodetector, signal processing circuit, and stimulus current generator. They are vertically stacked and electrically connected using 3D integration technology. Our retinal prosthesis has a small size and lightweight with high resolution, therefore it could increase the patients` quality of life (QOL). For realizing the fully implantable retinal prosthesis, we developed a retinal prosthesis module comprising a retinal prosthesis chip and a flexible cable with stimulus electrode array for generating optimal stimulus current. In this study, we used a 2D retinal chip as a prototype retinal prosthesis chip. We fabricated the polymide-based flexible cable of $20{\mu}m$ thickness where 16 channels Pt stimulus electrode array was formed in the cable. Pt electrode has an impedance of $9.9k{\Omega}$ at 400Hz frequency. The retinal prosthesis chip was mounted on the flexible cable by an epoxy and electrically connected by Au wire. The retinal prosthesis chip was cappted by a silicone to pretect from corrosive environments in an eyeball. Then, the fabricated retinal prosthesis module was implanted into an eyeball of a rabbit. We successfully recorded electrically evoked potential (EEP) elicited from the rabbit brain by the current stimulation supplied from the implanted retinal prosthesis module. EEP amplitude was increased linearly with illumination intensity and irradiation time of incident light. The retinal prosthesis chip was well functioned after implanting into the eyeball of the rabbit.

• 수산해양기술연구
• /
• 제36권1호
• /
• pp.1-11
• /
• 2000

A low frequency, high power hydroacoustic transducer with 7 tonpilz piston elements assembled in a circular array suitable for marine application, such as the transmission of underwater information and the development of new fisheries resources in the deep sea zone was designed. A modified Mason's model was applied to monitor and to simulate the transducer behavior at each step during the fabrication. The in air, and in water constructed tonpilz transducer was tested experimentally and numerically by changing the size and the type of the material for head, tail and acoustic window. Also, the developed transducer was excited by pulse signals and the received waveform was analyzed. The resonance peaks in the transmitting voltage response(TVR) of a single tonpilz element without housing were observed at 11.33kHz in air and 10.93kHz in air and 10.93 kHz in water, respectively, with the overall electrical-acoustic efficiency of 43.7%. The value of TVR of single tonpilz element with aluminum housing in water was 129.87dB re 1 $\mu$Pa/V at 12.25 kHz with the frequency bandwith of 2.15 kHz and half beam angle of 30.2$^{\circ}$at -3dB.The resonance peaks in the transmitting voltage response of the 7 element circular transducer were observed at 11.50 kHz in air and 11.45 kHz in water, respectively. The value of TVR in water 144.84 dB re 1$\mu$Pa/V at 11.5kHz with the frequency bandwith of 4.25 kHz and the half beam angle of $22.3^{\circ} $ at -3dB.Reasonable agreement between the experimental measurements and the theoretical predictions for the directivity patterns, TVRs and the impedance characteristics of the designed transducer was achieved.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.193-193
• /
• 2011

To obtain ceramic films, the sol-gel coating technique has been broadly used with heat treatment, but crack formation tend to occur during heat treatment in thick sol-gel films. We prepared PZT thin films by sol-gel method with single-step spin coating process. The PZT solution have been synthesized using lead acetate ($Pb(CH_3COO)_2$), zirconium acetylacetonate ($Zr(OC_3H_7^n)_4$), and titanium diisopropoxide bis(acetylacetonate) 75wt% in isopropanol ($Ti(OC_3H_7^i)_2(OC_3H_7^n)_2$) as starting materials and n-propanol was selected as a solvent. The poly(vynilpyrrolidone) (PVP) was added with 0, 0.25, 0.5, 0.75, and 1 molar ratios to control viscosity of solution. We investigated influence of the viscosity on thickness, microstructure, and electrical properties of final PZT films. Thermo-gravimetric analysis and differential scanning calorimeter (TGA/DSC) was carried out from room temperature to $800^{\circ}C$ in order to measure pyrolysis temperature. Structural characteristics were analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Ferroelectric and dielectric properties were measured by RT66A (Radiant) and impedance analyzer (Agilent), respectively. The thicknesses of PZT films depended on incorporation of an excess amount of PVP. Finally, we obtained PZT films of good quality without crack formation via single-step spin coating.

• 한국분말재료학회지
• /
• 제22권6호
• /
• pp.396-402
• /
• 2015

The organic binder-free paste for dye-sensitized solar cell (DSSC) has been investigated using peroxo titanium complex. The crystal structure of $TiO_2$ nanoparticles, morphology of $TiO_2$ film and electrical properties are analyzed by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Electrochemical Impedance Spectra (EIS), and solar simulator. The synthesized $TiO_2$ nanopowders by the peroxo titanium complex at 150, 300, $400^{\circ}C$, and $450^{\circ}C$ have anatase phase and average crystal sizes are calculated to be 4.2, 13.7, 16.9, and 20.9 nm, respectively. The DSSC prepared by the peroxo titanium complex binder have higher $V_{oc}$ and lower $J_{sc}$ values than that of the organic binder. It can be attributed to improvement of sintering properties of $TCO/TiO_2$ and $TiO_2/TiO_2$ interface and to formation of agglomerate by the nanoparticles. As a result, we have investigated the organic binder-free paste and 3.178% conversion efficiency of the DSSC at $450^{\circ}C$.

• Journal of Electrochemical Science and Technology
• /
• 제7권3호
• /
• pp.190-198
• /
• 2016

Application of fuel cell to produce renewable energy for commercial purpose is limited by the high cost of Pt based electrode materials. Development of inexpensive, high energetic electrode is the need of the hour to produce pollution free energy using bio-fuel through a fuel cell. Ni-Cu and Ni-CeO₂-Cu electrode materials, electro synthesized by pulse current have been developed. The surface morphology of the electrode materials is controlled by different deposition parameters in order to produce a high current from the electro-oxidation of the fuel, the ethanol. The developed materials are electrochemically characterized by Cyclic Voltammetry (CV), Chronoamperometry (CA) and Potentiodynamic polarization tests. The results confirm that the high current is due to their enhanced catalytic properties viz. high exchange current density (i₀), low polarization resistance (R_p) and low impedance. It is worthwhile to mention here that the addition of CeO₂ to Ni-Cu has outperformed Pt as far as the high electro catalytic properties are concerned; the exchange current density is about eight times higher than the same on Pt surface. The morphology of the electrode surface examined by SEM and FESEM exhibits that the grains are narrow and sub spherical with 3D surface, containing vacancies in between the elongated grains. The fact has enhanced more surface area for electro oxidation of the fuel, giving rise to an increase in current. Presence of Ni, CeO₂, and Cu is confirmed by the XRD and EDXS. Fuel cell fabricated with Ni-CeO₂-Cu material electrode is expected to produce clean electrical energy at cheaper rates than conventional one, using bio fuel the derived from biomass.

• 한방비만학회지
• /
• 제4권1호
• /
• pp.67-80
• /
• 2004

Objectives: Obesity is a growing epidemic with subsequent health consequences leading not only to reduced quality of life but also to increased medical costs. Recently nutritional balances are emphasized in the field of obesity, and especially maintaining proper equilibriums of minerals. The correlation of minerals obtained from the method of HTMA(Hair Tissue Mineral Analysis) with obese degree has not been studied in Korea yet. We studied any significant difference of mineral concentrations and components according to the obese degree. Methods: 78 subjects were analyzed who visited Garosero clinic of oriental medicine to lose their weight from June to November 2004. We used BMI(Body Mass Index), PBF(Percent Body Fat), WHR(Waist-Hip Ratio) and abdominal circumference obtained by bio-electrical impedance analysis as an obese degree. And we analyzed correlation with mineral concentrations and ratios obtained from HTMA. Results & Conclusion: 1. Na, K, Zn, Se had significant correlation with obese degree in case of nutritional minerals from HTMA. Especially, K had high significance. 2. Toxic minerals from HTMA had no significance with obese degree. 3. Rb had significant correlation with obese degree in case of additional minerals from HTMA. 4. Among important ratios from HTMA, Na/K had significant correlation with obese degree, but Ca/K had correlation except PBF, and Na/Mg had correlation except WHR. 5. Among toxic ratios from HTMA, Se/Hg had significant correlation with obese degree, but S/Hg had correlation except BMI. 6. Na, K, Zn, Rb, Na/K, Ca/K had significant differences between obesity groups classfied by BMI. Ob II group had sinificant difference from NW group in cases of K, Zn, Rb, Na/K, and Ob II group had sinificant difference from OW group in case of Ca/K.

• Restorative Dentistry and Endodontics
• /
• 제13권2호
• /
• pp.265-282
• /
• 1988

The pulp response of posterior composite resins in relation to the thickness of remaining dentin was studied with 120 teeth from 6 dogs, Class V. cavities were prepared on the cervical area of facial surfaces. The thickness of remaining dentin was controlled with Caries Meter$^{(R)}$. The cavities of group A were prepared to show the electrical impedance of 22-26$K{\Omega}$(thickness of remaining dentin:0.4-0.5mm). The cavities of group B, 50-55$K{\Omega}$(thickness of remaining dentin: 0.8-0.9mm). Zinc - Oxide Eugenol cement, Estilux$^{(R)}$ posterior, Heliomolar$^{(R)}$ radiopaque, P-30$^{(R)}$ and Scotchbond$^{(R)}$+P-30$^{(R)}$ were filled in each cavity. After 3days, 1 week, 2 weeks, 4 weeks, 9 weeks and 13 weeks, the teeth and pulp tissue were processed routinely and stained with Hematoxylin and Eosin. Pathological tissue changes were observed with light microscope. The following results were obtained. I. The pulp response of group A cavties was severer than that of group B cavities. 2. In the pulp of group A cavities which were filled with Zinc-Oxide Eugenol Cement, only vascular changes were observed after 3 days and 1 week, severe acute inflammation after 4 weeks, moderate acute inflammation after 9 weeks, and chronic inflammation and formation of granulation tissue after 13 weeks. 3. In the pulp of group A cavities which were filled with Estilux$^{(R)}$ posterior, only vascular changes were observed after 3 days and 1 week. But the inflammatory response has became much severer with the elapsed experimental period. 4. In the pulp of group A cavities which were filled with Heliomolar$^{(R)}$ radiopaque, the inflammatory response with the elapsed experimental period was not severer than that of the pulp of group A cavities which were filled with other materials. 5. In the group B cavities, the difference of pulp response by filling materials was not recognizable. In the group A cavities, the pulp response of Estilux$^{(R)}$ posterior was severest and in order P-30$^{(R)}$, Heliomolar$^{(R)}$ radiopaque was slighter.

• 한국전자통신학회논문지
• /
• 제12권6호
• /
• pp.1049-1056
• /
• 2017

본 논문에서는 WLAN 시스템에 적용 가능한 두 개의 원호 모양의 선로를 갖는 모노폴 안테나를 설계, 제작 및 측정하였다. 제안된 안테나는 마이크로스트립 급전을 바탕으로 두 개의 원호 모양의 선로를 갖도록 설계하여 이중대역 특성을 갖도록 하였다. 상용 툴인 HFSS을 사용하여 L2, L5, 슬릿유무에 대한 시뮬레이션을 수행하여 최적화된 수치를 얻었다. 제안된 안테나의 크기($12.0{\times}29.5{\times}1.0mm^3$)는 유전율 4.4인 FR-4 기판($13.0{\times}34.0{\times}1.0 mm^3$) 위에 설계 및 제작되었다. 제작 결과, 제안된 안테나는 -10 dB 임피던스 대역폭을 기준으로 360 MHz(2.29~2.65 GHz) 그리고 1,245 MHz (4.705~5.95 GHz)의 대역폭을 얻었다. 또한, 제안된 안테나의 측정 이득과 방사패턴 특성이 요구되는 이중대역에서 제시되었다.