• 한국분말재료학회지
• /
• 제18권2호
• /
• pp.105-111
• /
• 2011

This study investigated the effect of wire diameter and applied voltage on the fabrication of Ni-free Fe-based alloy nano powders by employing the PWE (pulsed wire evaporation) in liquid, for high temperature oxidation-resistant metallic porous body for high temperature particulate matter (or soot) filter system. Three different diameter (0.1, 0.2, and 0.3 mm) of alloy wire and various applied voltages from 0.5 to 3.0 kV were main variables in PWE process, while X-ray diffraction (XRD), field emission scanning microscope (FE-SEM), and transmission electron microscope (TEM) were used to investigate the characteristics of the Fe-Cr-Al nano powders. It was controlled the number of explosion events, since evaporated and condensed nano-particles were coalesced to micron-sized secondary particles, when exceeded to the specific number of explosion events, which were not suitable for metallic porous body preparation. As the diameter of alloy wire increased, the voltage for electrical explosion increased and the size of primary particle decreased.

• Current Photovoltaic Research
• /
• 제2권4호
• /
• pp.177-181
• /
• 2014

$Cu_2ZnSn(S_xSe_{1-x})_4$ (CZTSSe) absorber thin films were prepared on Mo coated soda lime glass substrates by sulfo-selenization of sputtered stacked Zn-Sn-Cu precursor thin films. The Zn-Sn-Cu precursor thin films were sulfo-selenized inside a graphite box containing S and Se powder using rapid thermal processing furnace at $540^{\circ}C$ in Ar atmosphere with pre-treatment at $300^{\circ}C$. The effect of different S/Se ratio on the structural, compositional, morphological and electrical properties of the CZTSSe thin films were studied using XRD (X-ray diffraction), XRF (X-ray fluorescence analysis), FE-SEM (field-emission scanning electron microscopy), respectively. The XRD, FE-SEM, XRF results indicated that the properties of sulfo-selenized CZTSSe thin films were strongly related to the S/Se composition ratio. In particular, the CZTS thin film solar cells with S/(S+Se)=0.25 shows best conversion efficiency of 4.6% ($V_{oc}$ : 348 mV, $J_{sc}$ : $26.71mA/cm^2$, FF : 50%, and active area : $0.31cm^2$). Further detailed analysis and discussion for effect of S/Se composition ratio on the properties CZTSSe thin films will be discussed.

• 유기물자원화
• /
• 제11권4호
• /
• pp.90-96
• /
• 2003

본 연구에서는 유류로 오염된 현장 주유소를 대상으로 토양증기추출 공정 적용시 연속추출과 간헐추출 운전의 효율성을 검토하였다. 공기주입 후 압력을 측정한 결과 동일 조건에서도 공기주입정 헤드(head) 압력이 상이하게 나타나 실험부지내 토양이 매우 불균일하다는 것을 알 수 있었다. 간헐식은 1시간 가동 후 3시간 정지시켰으며, 연속식은 50분 가동 후 10분 휴지하는 것을 연속추출한 것으로 가정하였다. 송풍기의 용량은 $1m^3/min$이었다. 추출모드의 영향실험은 오염농도가 심한 두 지점을 선정하여 실시하였으며, 48시간 동안 온라인 모니터링으로 측정한 TPHgas 농도를 적산하여 비교한 결과 1시간 가동 후 3시간 휴지한 간헐추출모드가 연속추출모드보다 높게 나타났다. 일반적으로 토양증기추출 공정이 장기간 가동된다는 점을 고려한다면 오염가스 휘발량, 전력비용, 그리고 시설의 감가상각비 등에서 볼 때 간헐추출모드로 운전하는 것이 연속추출모드 보다 더 유리할 것으로 판단된다.

• 기술사
• /
• 제15권4호
• /
• pp.12-24
• /
• 1982

East Parts of Bangladesh have been benifited by low cost energy generated by domestic natural gas but West parts where energy generated by imported fuel. Bangladesh Government authority has very much concerned to transmit the low cost electricity to the West from the East for past several years. To solve such concerns, cross-country 230kv double circuits Power transmission line was proposed, however there was a big obstacle for the realization of this line to cross the Jamuna river which has 12 km long width with a deep muddy river bed. A consultant engineering firm named Merz-Mclellan anyway finalized this plan and a world-wide bid was announced on June 31, 1979. Due to the expected difficulty to construct the towers on sea like area, only three construction groups have participated. including a Korean joint venture organization of Samsung-Korean Developement corporation-Kolon Electric Machinery company. After 3 months bid evaluation, contract was awarded to Korean Consosium and KEM Co was in charge of designing steel towers with anchor bolts and base plates beside to electrical engineering field. Then KEM Co have faced and over-comed many unenpected technical difficulties such as forced eccentricity joint on base plate, distorsion issue of 60mm thick plates welding, threading anchor bolts, tad heat treatment of some anchor bolts, disagreement from Consultant Engineer on multiplying factor of leg stresses for 45$^{\circ}$ wind and on reducing O.L.F for wind loads on cables for such 1220km long spans. After spending two years long period for designing and engineering towers, base plates, and anchor bolts, first shipment of tower was finally realized on Nov. 8, 1981 and on the other hand KDD has proceeded concrete caisson work on schedule at Jamuna river site and expected to complete tower erection and stringing of cables within this year of 1982 which was original completion target.

• 한국산학기술학회논문지
• /
• 제16권3호
• /
• pp.2131-2134
• /
• 2015

본 논문에서는 종이를 기판으로 사용하고 용액공정이 가능한 강유전체 메모리 소자의 제작 가능성을 검토하였다. 유기물 강유전체인 "폴리비닐리덴트리플루오르에틸렌" 용액을 하부전극이 형성된 종이기판 위에 스핀코핑 방법을 이용하여 도포하였다. 하부전극으로는 진공증착법을 이용하여 알루미늄을 증착하였고, 도포된 "폴리비닐리덴트리플루오르에틸렌" 용액은 열처리 과정을 통해 결정화하였다. 제작된 "폴리비닐리덴트리플루오르에틸렌" 박막은 주사 전자 현미경법(SEM), 원자간력 현미경(AFM)을 이용하여 박막의 단면 및 표면의 특성을 평가하였다. 전압에 따른 분극특성 측정을 통해, 종이기판 위에 형성된 "폴리비닐리덴트리플루오르에틸렌" 박막이 매우 훌륭한 강유전체 특성을 보여주고 있음을 확인하였다. 또한, 종이기판의 응용가능성을 검토하기 위하여, 실리콘 기판위에 제작한 "폴리비닐리덴트리플루오르에틸렌" 박막과의 비교에 있어서도 손색없는 강유전체 특성을 보여주고 있음을 알 수 있었다. 이러한 결과들은 종이를 기판으로 이용하여 전자소자들을 제작 할 수 있음을 시사하며, 또한 용액공정으로 고밀도의 저렴한 강유전체 메모리 소자를 손쉽게 제작 할 수 있다는 것을 의미한다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제18권6호
• /
• pp.489-495
• /
• 2014

Protease-activated receptor (PAR)-2 is expressed in endothelial cells and vascular smooth muscle cells. It plays a crucial role in regulating blood pressure via the modulation of peripheral vascular tone. Although some reports have suggested involvement of a neurogenic mechanism in PAR-2-induced hypotension, the accurate mechanism remains to be elucidated. To examine this possibility, we investigated the effect of PAR-2 activation on smooth muscle contraction evoked by electrical field stimulation (EFS) in the superior mesenteric artery. In the present study, PAR-2 agonists suppressed neurogenic contractions evoked by EFS in endothelium-denuded superior mesenteric arterial strips but did not affect contraction elicited by the external application of noradrenaline (NA). However, thrombin, a potent PAR-1 agonist, had no effect on EFS-evoked contraction. Additionally, ${\omega}$-conotoxin GVIA (CgTx), a selective N-type $Ca^{2+}$ channel ($I_{Ca-N}$) blocker, significantly inhibited EFS-evoked contraction, and this blockade almost completely occluded the suppression of EFS-evoked contraction by PAR-2 agonists. Finally, PAR-2 agonists suppressed the EFS-evoked overflow of NA in endothelium-denuded rat superior mesenteric arterial strips and this suppression was nearly completely occluded by ${\omega}$-CgTx. These results suggest that activation of PAR-2 may suppress peripheral sympathetic outflow by modulating activity of $I_{Ca-N}$ which are located in peripheral sympathetic nerve terminals, which results in PAR-2-induced hypotension.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전력기술부문
• /
• pp.122-124
• /
• 2005

Underground distribution system is a trend due to the successive development of metropolitan area and satellite cities and the environment of the commercial and residential areas. The high quality of electricity, which is related with the minimal outage duration time due to the maintenance work for the underground distribution line, is mandatory. Hence, the construction method and tools for the outage-free maintenance construction have been required for underground distribution system. So far, all the efforts for outage-free maintenance for the underground distribution have been limited only to the survey for foreign countries situation and the theoretical provision; thus, It is required to develop the various construction method and the application tools. Differently from the aerial line, the construction of the underground cable is complicated and the insulation distance between conductor and shield should be maintained in loadmaking/breaking operation, though the apparatus connected with cable is a deadfront type. Also since the apparatus is installed above ground, by-pass of faulted area at busy area needs a variety of high technologies. Therefore, in this these, the authors introduce the development status of the loadbreak connectors, connection facilities, outage-free maintenance system for secondary side, a secondary auxiliary bushing and additional tools so that there can be more progress on this field.

• 약학회지
• /
• 제41권3호
• /
• pp.370-380
• /
• 1997

The role of nitric oxide (NO) on the non-adrenergic non-cholinergic (NANC) relaxations induced by the short and prolonged electrical field stimulation (EFS) has been studied in the rabbit corpus cavernosum. In the presence of atropine and guanethidine the prolonged EFS (2-16 Hz) of corpus cavernosal strips precontracted with phenylephrine produced frequency-dependent relaxations, which were abolished by tetrodotoxin as shown in the relaxations induced gy the short EFS, indicating that their orgin is NANC nerve stimulation. $N^G$-nitro-L-arginine (L-NNA), inhibitor of nitirc oxide synthase, caused a concentration-dependent inhibition to the NANC relaxation, and at 100 M L-NNA the relaxation were virtually abolished. The inhibitory effect of L-NNA was reversed by L-arginine. Hemoglobin abolished the relaxations to NO and also caused a concentration-dependent inhibition of the NANC relaxation. The hemoglobin-resistant relaxation induced by EFS was eliminated by L-NNA. Methylene blue significantly reduced the NANC relaxation in a conentration-dependent manner. The NANC relaxation was not affected by a VIP-inactivating pepridase, alpha0chymotrypsin, whereas VIP-induced relaxation was completely abolished. NO- and VIP-induced relaxation were not affected by L-NNA. These results indicate that the NANC relaxation induced by prolonged EFS of the rabbit corpus cavernosum is mediated by NO-guanosine 3',5'-cyclic monophosphate pathway as shown in the relaxation induced by the short EFS, and that VIP release is not essential for the NANC relaxation of the rabbit corpus cavernosum and VIP is not involved the generation fo NO.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.3.1-3.1
• /
• 2011

Over the past decade, the major efforts for lowering the cost of electronics has been devoted to increasing the packaging efficiency of the integrated circuits (ICs), which is defined by the ratio of all devices on system-level board compared to the area of the board, and to working on a larger but cheaper substrates. Especially, in flexible electronics, the latter has been the favorable way along with using novel nanomaterials that have excellent mechanical flexibility and electrical properties as active channel materials and conductive films. Here, the tool for achieving large area patterning is by printing methods. Although diverse printing methods have been investigated to produce highly-aligned structures of the nanomaterials with desired patterns, many require laborious processes that need to be further optimized for practical applications, showing a clear limit to the design of the nanomaterial patterns in a large scale assembly. Here, we demonstrate the alignment of highly ordered and dense silicon (Si) NW arrays to anisotropically etched micro-engraved structures using a simple evaporation process. During evaporation, entropic attraction combined with the internal flow of the NW solution induced the alignment of NWs at the corners of pre-defined structures. The assembly characteristics of the NWs were highly dependent on the polarity of the NW solutions. After complete evaporation, the aligned NW arrays were subsequently transferred onto a flexible substrate with 95% selectivity using a direct gravure printing technique. As proof-of-concept, flexible back-gated NW field effect transistors (FETs) were fabricated. The fabricated FETs had an effective hole mobility of 0.17 $cm2/V{\cdot}s$ and an on/off ratio of ${\sim}1.4{\times}104$. These results demonstrate that our NW gravure printing technique is a simple and effective method that can be used to fabricate high-performance flexible electronics based on inorganic materials.

• 한국재료학회지
• /
• 제20권9호
• /
• pp.472-477
• /
• 2010

$Al_2O_3$ has received wide attention with established use as a catalyst and growing application in structural or functional ceramic materials. On the other hand, the boehmite (AlO(OH)) obtained by sol-gel process has exhibited a decrease in surface area during phase transformation due to a decline in surface active site at high temperature. In this work, $Al_2O_3$-CuO/ZnO (ACZ) and $Al_2O_3$-CuO/CeO (ACC) composite materials were synthesized with aluminum isopropoxide, copper (II) nitrate hemi (pentahydrate), and cerium (III) nitrate hexahydrate or zinc (II) nitrate hexahydrate. Moreover, the Span 80 as the template block copolymer was added to the ACZ/ACC composition to make nano size particles and to keep increasing the surface area. The ACZ/ACC synthesized powders were characterized by Thermogravimetry-Differential Thermal analysis (TG/DTA), X-ray Diffractometer (XRD), Field-Emmision Scanning Electron Microscope (FE-SEM), Bruner-Emmett-Teller (BET) surface analysis and thermal electrical conductivity (ZEM-2:M8/L). An enhancement of surface area with the addition to Span 80 surfactant was observed in the ACZ powders from 105 $m^2$/g to 142 $m^2$/g, and the ACC powders from 103 $m^2$/g to 140 $m^2$/g, respectively.