• 한국철도학회논문집
• /
• 제15권3호
• /
• pp.224-230
• /
• 2012

전동차의 집전장치용 주습판은 형태와 재질에 따라 마모현상에 상당한 차이가 있으며 특히, 강수량에 따른 이상마모, 아크에의한 급격한 이상마모는 전차선과 주습판의 수명을 결정하는 주요인자로 작용한다. 본 연구는 현차 실험을 통하여 우수한 전기전도도 및 내아크성을 가진 동계주습판의 마모현상을 정상마모 특성이 관찰된 동계주습판과 우천 시 국부적으로 이상마모 특성이 관찰된 동계주습판에 대하여 강수량, 주행거리 및 주습판의 교환 후 중량을 상호 비교하여 분석하였다. 트라이볼로지적 접근을 통하여 내마모성 등이 우수한 철계습판체의 적용 필요성을 본 실험적 연구를 통하여 제안하였다.

• 한국공간구조학회논문집
• /
• 제20권4호
• /
• pp.185-192
• /
• 2020

A new lighting support structure composing of two-way wires and pulley, a pulley-type wireway system, was developed to improve the seismic performance of a ceiling type lighting equipment. This study verifies the seismic performance of the pulley-type wireway system using a numerical approach. A theoretical model fitted to the physical features of the newly-developed system was proposed, and it was utilized to compute a frictional coefficient between the wire and pulley sections under tension forces. The frictional coefficient was implemented to a finite element model representing the pulley-type wireway system. Using the numerical model, the seismic responses of the pulley-type wireway system were compared to those of the existing lighting support structure, a one-way wire system. The addition of the pulley component resulted in the increasement of energy absorption capacity as well as friction effect and showed in significant reduction in maximum displacement and oscillation after the peak responses. Thus, the newly-developed wireway system can minimize earthquake-induced vibration and damage on electric equipment.

• 소성∙가공
• /
• 제32권3호
• /
• pp.122-128
• /
• 2023

As electric vehicles (EV) have increasingly replaced the conventional vehicles with internal combustion engines (ICE), most of automotive makers are actively devoting to the technology development of EV parts. Accordingly, the manufacturing process for power source has been also shifting from engine/transmission to EV motor/reducer system. However, lack of experience in developing the EV motor still remains as a technical challenge. In this paper, we employed the forming simulation based on finite element modeling to solve this problem. In particular, in order to increase the accuracy of the forming simulation, we introduced the elastic-plastic constitutive model parameters for polymer-copper hybrid wire by investigating the individual strain-stress curves, and elastic modulus of polymer and copper. Then, the reliability of modeling procedure was confirmed by comparing the simulated results with experiments. Finally, the identified mechanical properties and finite element modeling were applied to a hairpin forming process, which involves multiple deformation paths such as bending, pressing, widening, and twisting. The proposed numerical approach can replace common experience or experiment based trials by reducing production time and cost in the future.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권2호
• /
• pp.30-33
• /
• 2008

Several kinds of superconducting fault current limiters (SFCLs), which reduces huge fault current, have been developing by many research groups. The SFCL has no impedance during normal operation, so it dose not give any influence to electric power system. The resistive type SFCL reduces the fault current with the impedance generated in the superconducting part of the SFCL when the fault current exceeds the critical current of SFCL. In this paper, a new type resistive SFCL made of bifilar coil wound with two different high-Tc superconducting (HTS) wires in parallel. Although a bifilar coil has theoretically no inductance, the bifilar coil made in this paper could generate inductance at fault. The specifications of the used two wires were considerably different, thus current distribution between the two HTS wire was different at fault. When the fault current exceeded the critical current of one wire in the bifilar coil, the momentary sharp increase of impedance was detected. Base on the results, a new resistive type SFCL can generate not only resistance but also inductance, which can be used to control a fault current in the future.

• 한국입자에어로졸학회지
• /
• 제19권3호
• /
• pp.89-100
• /
• 2023

In our previous study, a wire-plate type electrostatic precipitator (ESP) was developed to collect bioaerosols of 100 nm size. In the study, various flow rates (40 ~ 100 L/min) and applied voltages (3 ~ 10 kV) were tested for experiment. In this study, numerical analysis was performed for the ESP of the previous study with the same flow rates and applied voltages, but with varying the size of bioaerosols to 0.04 ~ 2.5 ㎛. Overall, the numerical analysis results well predicted the experimental data. Bioaerosols of 0.1 ~ 0.5 ㎛ showed the minimum collection efficiency for all conditions because of low charge number. The effect of the ionic wind generated by the corona discharge was calculated. However, the ionic wind did not affect much the collection efficiency. The aerosol collection in the ESP of this study was due to the electrostatic force generated by particle charge in the electric field. This numerical study on the ESP can be used for the design and optimization of higher flow rate (> 100 L/min) ESP.

• 전력전자학회논문지
• /
• 제9권3호
• /
• pp.213-221
• /
• 2004

최근에, 평활용 직류 커패시터가 설치된 다이오드 정류기가 가전제품 및 교류 운전 장치와 같은 전자 장치에 점점 많이 사용되고 있고, 이러한 부하에 의해서 발생하는 고조파 문제가 점차 중요한 문제로 부각되고 있다. 또한, 3상 4선식 전력 시스템은 상업용 빌딩이나 제조 플랜트 등에 전력을 공급하는 방법으로 많이 사용되고 있는데 이러한 시스템에서는 중성선에 과도한 전류가 흐르게 되고, 중성선 전류는 기본적으로 3고조파 성분으로 중성선 도체 사이즈 선정의 실패나 중성점의 전위를 상승시키거나 변압기의 과열 현상 등을 유발할 수 있다. 이러한 관점에서 본 논문에서는 직접 보상전압 추출기법으로 동작하는 직렬 형 능동 필터를 제안하며, 성능함수 알고리즘의 장점은 게인을 곱하지 않고 보상 전압을 직접 구함으로써, 어떠한 다른 알고리즘보다 보상 전압 계산 방법이 간단하다. 제안된 알고리즘의 타당성을 증명하기 위하여 프로토타입 능동 필터를 제작하여 실험을 수행하였다.

• 한국해양공학회지
• /
• 제25권6호
• /
• pp.1-8
• /
• 2011

This paper describes a new method for a digital gas metal arc welding (GMAW) system. The GMAW system is an arc welding process that incorporates the GMAW power source (PS-GMAW) with a wire feed unit (WFU). The PS-GMAW requires an electric power of constant voltage. A constant magnitude is maintained for the arc current by controlling the wire-feed speed of the WFU. A mathematical model is derived, and a self-tuning fuzzy proportional-integral-derivative (PID) controller is designed and applied to control the welding current. The electrode wire feeding mechanism with this controller is driven by a DC motor, which can compensate for both the molten part of the electrode and undesirable fluctuations in the arc length during the welding process. By accurately maintaining the output welding current and welding voltage at constant values during the welding process, excellent welding results can be obtained. Simulation and experimental results are shown to prove the effectiveness of the proposed controller.

• 한국전자파학회논문지
• /
• 제25권3호
• /
• pp.339-347
• /
• 2014

본 논문에서는 유연성 기판을 이용한 새로운 광대역 메타물질 구조의 흡수체를 제안하였다. 제안된 메타 물질 구조의 단위 셀은 유연성 있는 폴리이미드 기판 위의 동일 평면상에 놓여진 ELC 공진기와 cut-wire 구조로 이루어졌으며, 설계 주파수 대역 밖에서 레이더 단면적(RCS) 값을 감소시키기 위하여 제안된 구조의 금속 패턴 층은 입사 전자파의 진행 방향과 평행하게 놓았다. 총 $33{\times}45$개의 단위 셀들의 배열로 이루어진 흡수체 시작품을 제작하고, 측정한 결과, 주파수 9.06 및 15.0 GHz에서 각각 92 % 및 93 % 이상의 최대 흡수율과 75 %의 full-width at half-maximum 대역폭을 나타내었다. 제안된 금속 접지 판이 없는 메타물질 구조는 마이크로파 주파수대 광대역 흡수체로 곡면 구조에도 응용이 가능하다.

• 한국철도학회논문집
• /
• 제14권3호
• /
• pp.222-227
• /
• 2011

드로퍼는 전차선로에서 여러형태의 클램프로 취부되어 전차선이 수평으로 유지하도록 지지하고, 판토그라프가 통과할 때 굽힘에 대한 기계적 응력에 영향을 받는다. 고속선용 드로퍼의 파단 원인을 조사하기 위해, 이론적 분석 및 시험을 실행하였다. 본 논문에서 사전이도에 의한 드로퍼의 정적 하중을 계산하였고, 시험에서 측정된 값과 유사하였다. 드로퍼 와이어의 파단원인을 분석하기 위해 현장에서 파단된 시료는 SEM 분석을 하였고, 새 시료도 일부 병행하며 시행하였다. 마지막으로, 고속열차가 300km/h로 통과할 때 드로퍼에 대한 동적 하중의 변화를 측정하였다. 기계적 하중이 반복적으로 발생될 때, 드로퍼 와이어는 피로에 의해 파단될 것이다. 이 결과는 고속전차선로 유지보수의 특별 관리와 드로퍼의 수명평가를 하는데 활용될 수 있을 것이다.

• 한국자동차공학회논문집
• /
• 제12권4호
• /
• pp.119-128
• /
• 2004

With the growing traffic density and increasing comfort requirements, the automation of the drive train will gain importance in vehicles. The automatic clutch actuation relieves the drivers especially in urban driving and stop-and-go traffic conditions. This paper describes the dynamic modeling of a clutch actuator and clutch spring. The dynamic model of the clutch system is developed using MATLAB/Simulink, and evaluated by experimental data using a test rig. This performance simulator is useful to develop the clutch-by-wire (CBW) system for an automated manual transmission (AMT). The electro-mechanical type CBW system is also implemented as an automatic clutch for AMT. The prototype of CBW system is designed and implemented systematically, which is composed of an electric motor, worm gear and slider-crank mechanism. The test rig is developed to perform the basic function test of the automatic clutch, and the developed prototype is validated by the experimental data on the test rig.