• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.128-131
• /
• 2000

The main objective of this paper is to design and test a new type of polymer ZnO surge arrester for DC power system of railroad vehicles. The rated voltage is 1500V direct current. The main research works are focused on structure design by finite element method, rating voltage, temporary over voltage and studies of characteristics of polymeric surge arrester.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.93-100
• /
• 2000

This paper studied technical investigation of effective operation and methodology for technical combination in south and north korea. For harmonious transportation on railroad system, the system of trans-korea railroad investigated on each part(system, Rolling stock, Cartenary ＆ Electricity, Signal and Track etc). Though it isn't show many difference on railroad system, we can show some difference on rolling stock, track and signaling system. For the effective and competitive operation on south and north korea, Many problem investigated and proposed alternative proposal for selecting of rolling stock(diesel or electric), track and signaling improving for speed-up and compatible system at AC and DC system.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.836-842
• /
• 2007

Recently it is a tendency that Diesel rolling stock is committing in the commuter's train route of the suburb for solving commuting traffic congestion. It has advantage which expense of diesel rolling stock is relatively cheaper than electric rail car or high-speed train. In addition, it can be using the exist route without large-scale facility investment. Because of this advantage, the demand of diesel rolling stock occupy regular portion from overseas railway car market. GM/RT 2100 specifies the loads vehicle bodies shall be capable of withstanding, identifies how material data shall be used and presents the principles to be used for design verification by analysis. Therefore, in order to fulfill the structural requirements, Rotem Company has carried out Finite Element Analysis (FEA) to verify whether the carbody structure has enough strength to withstand the loads specified by GM/RT 2100. This research contains the results obtained by the analysis. The analysis was carried out using I-DEAS 12 NX Series

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2005.11a
• /
• pp.497-498
• /
• 2005

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2004.05a
• /
• pp.150-151
• /
• 2004

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1642-1649
• /
• 2010

At present, KORAIL is in the middle of renovating. All steps exert great effort at cost reduction and a profit improvement. Especially to improve maintenance method and inspection period at the rolling-stock division lots of research is under progress. Daily inspection of rolling stocks is to operate the rolling stock normally. Daily inspection items are driving control device, coupling device, brake system, water system and air conditioning system, electrical system etc. Half of the maintenance manpower are inputted at daily inspection. Strengthens the quality and optimize the proportion of daily inspection are urgent problem. Daily inspection period extension aim is as follows. KTX from 3,500km to 5,000km, passenger car from 1st to 3,500km, new style electric locomotive from 2nd to 5,000km, the diesel locomotive is 2,800km from 1,200km. In this paper, the optimal daily inspection period and methods are considered including expected problem and counter measures.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1286-1291
• /
• 2004

This paper was showed evaluation method and technical items for measurement test of new catenary system of Honam(Daejeon - Mokpo) conventional railway electrified. This line have tested by three type new electric rolling stocks in order to test construction quality and operation safety of a new catenary system with speed-up than conventional speed. We have some important experiences through measurement test of catenary system by new device installed on train roof.

• Journal of the Korean Society of Safety
• /
• v.32 no.3
• /
• pp.117-122
• /
• 2017

In this study, we studied the ride quality considering the deterioration effects of the three type couplers (single, double, and ring types) for EMUs. In order to know the impact occurred when an urban transit vehicle is under breaking, we tested the conditions of the service brake and the emergency brake. Normal coupler models without any slack showed similar dynamic performance results under all breaking conditions. But if the couplers become old, the initial pre-stresses are removed because of permanent compressive deformation in rubber. For three types of the old coupler models without the initial pre-stress, we evaluated dynamic performances of each type. As the results, the maximum and average acceleration levels of the double type and the ring type were similarly low in all conditions. But the accelerations of the single type coupler was high when compared to those of the double and ring types. In addition, Jerk value of the single type model associated with ride quality was high up to 15 times to the ring type in condition of the service braking in empty vehicle weight. Jerk value of the double type model was high up to 6 times to the ring type.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.295-301
• /
• 1997

본 연구의 목적은 수도권 전동차량의 주행성능을 평가하는 방법으로 진동성능을 비교검토하기 위하여 실차측정하고 분석한 것이다. 전동차량의 제작년도별로 측정대상차량을 샘플링하여 다양한 조건에서 진동을 측정하고 실측데이타를 시간영역의 통계적 방법으로 분석한 결과 제작년도에 따른 영향도 약간 나타났으며 전동차량의 2차 현가장치의 종류에 따른 영향을 발견할 수 있었다. 또한 측정선로구간의 특성에 따른 영향도 비교적 잘 나타나고 있음을 알 수 있었다.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1445-1456
• /
• 2011

This paper presents the research of Low Pass Filter(hereinafter called "LPF") which is the part of Chopper Gate Control Unit on the electric rolling stock. Chopper Gate Control Unit controling the propulsive equipments of electric rolling stock consists of several electronic parts, PCB, Power Supply, Gate Circuit Amp, Freon Cooling Device, and has been used the parts made by japan manufacturer Mitsubish. But these parts recently have been more broken down and slow down performance because of long-term use, deterioration. Most of the malfunctions are low performance of LPF. Furthermore, it is physically impossible to repair LPF. Because it is molding type part and no longer manufactured. Also it needs high cost for custom-building. Therefore, it is now making up for through self-developed LPF and operating on Busan metro 1st after on-board testing. This research performed the PS Pice simulation testing, analysis of self-developed LPF performance and the wave form characteristic by multi-function synthesizer, spectrum analyzer, oscilloscope.