• Elastomers and Composites
• /
• v.24 no.3
• /
• pp.185-192
• /
• 1989

The thermal degradation of the homopolymer poly(methyl methacrylate)(PMMA)/tetra cyano quino dimethane(TCNQ) blend and Eccogel/TCNQ blend were carried out using the thermogravimetric method in the stream of nitrogen gas with 60ml/min at various heating rate from 1 to $20^{\circ}C/min$. Friedman and Ozawa mathermatical methods were used to obtain the value of activation energy. Produced electrical properties and activation energy by electric conductivity method that used LCR meter.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.451-454
• /
• 2002

A silicone rubber has been used so many dielectric materials for extremely high voltage(EBW) electric appliances. The reason why it is very stable in the thermal, mechanical and electrical environment. In this paper, we have studied the dependence of dielectric characteristics of silicone rubber on frequency-dependent variation. The dielectric characteristics were measured in the temperature range of 25[$^{\circ}C$] and 150[$^{\circ}C$]. Also we measured in the voltage range of 1[V] and 20[V]. The energy of activation on the dielectric loss obtained 2.44[kcal/mol], 2.1[kcal/mol], 1.63[kcal/mol] and 1.57[kcal/mol] by appling respectively.

• Journal of the Korean Chemical Society
• /
• v.16 no.5
• /
• pp.284-289
• /
• 1972

Rates of the reactions of m-and p-ring-substituted thiobenzamides with benzyl bromide in acetone have been determined by an electric conductivity method. The Hammett rule has been adopted for these reactions. It has been observed that an electron-attracting substituent accelerates the reaction while an electron-donating substituent retards the reaction, and a mechanism which accounts for the observed kinetics has been postulated. The activation energies and entropies of activation for these reactions have also been calculated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.378-381
• /
• 2001

The electron drift mobility of poly(4,4'-cyclohexylidenediphenyl carbonate) (PC-Z) doped with 3,5-dimethy-3,5-di-t-butylstilbenequinone(MBSQ), 3,5,3,5-tetra-t-butyl stilbenequinone(TBSQ) and 3,5,3,5-tetra-methyl stilbenequinone(TMSQ) was measured by the time-of-flight technique. The electric field and temperature dependences of the electron drift mobility were discussed with Poole-Frenkel, Arrhenius formulations and non-Arrhenius type of temperature dependence. It was assumed that the hopping sites were Gaussian distribution. Mobility and activation energy of MBSQ were increased with increasing dopant. However, mobilities and activation energy of TBSQ and TMSQ were increased and decreased, respectively.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.2
• /
• pp.168-175
• /
• 1999

In this paper, a modified RBF(Radial Basis Function) network structure is suggested for the prediction of a time-series with non-linear, non-stationary characteristics. Coventional RBF network predicting time series by using past outputs sense the trajectory of the time series and react when there exists strong relation between input and hidden activation function's RBF center. But this response is highly sensitive to level and trend of time serieses. In order to overcome such dependencies, hidden activation functions are modified to react to the increments of input variable and multiplied by increment(or dectement) for prediction. When the suggested structure is applied to prediction of Macyey-Glass chaotic time series, Lorenz equation, and Rossler equation, improved performances are obtained.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.578-580
• /
• 2003

This paper describes a research for activation of diect load control program in competitive electicity market. A direct load control program after the restructuring of electric power industry will evolve to the bilateral information system to derive a voluntary participation of demand side resource. Therefore, this paper presented a right way of direct load control program for the foreign market research.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.378-381
• /
• 2001

The electron drift mobility of poly(4,4'-cyclohexylidenediphenyl carbonate)(PC-Z) doped with 3,5-dimethy-3,5-di-t-butylstilbenequinone(MBSQ), 3,5,3,5-tetra-t-butyl stilbenequinone(TMSQ) and 3,5,3,5-tetra-methyl stilbenequinone(TMSQ) was measured by the time-of-flight technique. The electric field and temperature dependences of the electron drift mobility were discussed with Poole-Frenkel, Arrhenius formulations and non-Arrhenius type of temperature dependence. It was assumed that the hopping sites were Gaussian distribution. Mobility and activation energy of MBSQ were increased with increasing dopant. However, mobilities and activation energy of TBSQ and TMSQ were increased and decreased, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.4
• /
• pp.349-355
• /
• 2002

The ionic conductivity of cubic solid solutions in the systems of CaO-$ZrO_2$, $Y_2O_3-ZrO_2$ prepared by SHS was examined. The higher conductivity appears to be related to a lower activation energy rather than to the number of oxygen vacancies dictated by composition. Conductivity-temperature data was obtained at 1000 $^{\circ}C$ in atmosphere of low oxygen partial pressure (~$10^{-40}$ atm) for $Y_2O_3-ZrO_2$ cubic solid solutions. The data indicated that these materials could be reduced, and the decree of reduction would be related with the measuring electric field.

• Journal of Embryo Transfer
• /
• v.27 no.1
• /
• pp.57-62
• /
• 2012

Efficient oocyte activation is a key step for the success of nuclear transfer in cloning. Ionomycin sequentially combined with 6-DMAP is now widely used to activate normal oocytes for analytical studies of oocyte activation and to activate reconstructed oocytes after nuclear transfer. The present study investigated sources of oocytes, duration of ionomycin and 6-DMAP, laser and electric stimulation in goat oocyte activation in order to optimize the protocols. Goat ovaries were collected in individual abattoirs during the breeding season and were delivered to the laboratory within 6 h in saline with 100 IU/ml streptomycin and 0.05 mg/ml penicillin. The oocytes were denuded from the cumulus cell by pipetting with 0.2% hyaluronidase in PBS at 20~22 hr post maturation. Oocytes with the polar body were selected and assigned to four groups for parthenogenetic activation. To examine the effect of duration of ionomycin treatment, oocytes after 20~22 hr of maturation were treated with 2.5 uM ionomycin for 1 or 5 min times and then cultured in 2 mM 6-DMAP for 2 or 4 hr. The activated oocytes were cultured in mSOF at $38.5^{\circ}C$ in $CO_2$ 5%, $O_2$ 5% and $N_2$ 90% multi incubator. Cleavage and blastocyst development was observed at 48 hr and day 8 of culture $in$ $vitro$, respectively. Activation rates of oocytes exposed to ionomycin for 1 min(86.4%) were significantly higher than those treated for 5 min(74.3%) duration. This indicated that 1 min ionomycin treatment was most suitable for activation of goat oocytes. The duration of 6-DMAP treat duration was in 2 mM 6-DMAP for 2 hr after 1 min exposure to 2.5 uM ionomycin. The activation rate of oocytes incubated in 6-DMAP for 2 hour(82.5%) was significantly higher than those in oocytes treated with 4 hr(75.5%).

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.4
• /
• pp.534-545
• /
• 2011

This paper describes the evaluation of kinetic parameters for pyrolysis and carbon char oxidation of residual oil. The non-isothermal pyrolysis of residual oil was carried out with TGA (Thermo-Gravimetric Analyzer) at heating rate of 2, 5, 10 and $20^{\circ}C/min$ up to $800^{\circ}C$ under N2 atmosphere. The first order and nth order pyrolysis models were used to fit the experimental data, and the nth order model was turned out to follow the experimental data more precisely than the first order model. For carbon char oxidation experiment, TGA and four heating rates used in pyrolysis experiment were also adapted. The kinetic parameters for the residual carbon char particle were obtained with three char oxidation model, that is, volume reaction, grain and random pore model. Among them, the random pore model described the char oxidation behaviour quite well, compared to other two models. The non-linear regression method was used to obtain kinetic parameters for both pyrolysis and carbon char oxidation of residual oil.