• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.123-132
• /
• 2000

To overcome problems of conventional glass ionomers, resin components have been added to glass ionomers. On a continuum between glass ionomers and composites are a variety of blends, employing different proportions of acid-base and free radical reactions to bring about cure. Popular groups defined between the ends are resin-modified glass-ionomers(RMGIs), polyacid-modified composite resins(Compomers) and ionomer modified resins. These groups show different clinical properties, and in selecting these materials for a restoration, one should sufficiently understand these different setting properties. In this study, some difference in the setting characteristics of different groups of hybrid ionomers were examined. Two RMGIs (Fuji2 LC,GC / Vitremer, 3M), three Compomers (Dyract AP, Dentsply / F2000, 3M / Elan, Kerr) were involved in this study. The identification of the setting characteristics of different groups was achieved by a two-stage study. First, thermal analysis was performed by a differential scanning calorimeter, and then the hardness of each group at different depth and time were measured by a micro-hardness tester. Thermal analysis was performed to identify the inorganic filler content and to record the heat change during setting process. The setting process was progressed for each material by chemical set mode and light-cured mode. In the hardness test, samples of materials were prepared with a 6mm-diameter metal ring, and the hardness was measured at the top, and 1mm, 2.5mm, 4mm below at just after a 40 second-cure, and after 10 minutes, 24 hours, and 7 days. Statistical analysis was performed by Mann-Whitney rank sum test to assess significant differences between set modes and types of materials, and by ANOVA and T-test to evaluate the statistical meanings of data at different times and depths of each materials. Followings are findings and conclusions derived from this study. Thermal analysis; 1. Compomers show no evidence of chemical setting while RMGIs exhibit heat output during the process of chemical setting. 2. Heat of cure of RMGIs exceed Compomers. 3. The net heat output of RMGIs through light-cured mode is higher than through chemically set mode. Hardness test; 1. Initial hardness of RMGIs immediately after light cure is relatively low, but the hardness increases as time goes by. On the contrary, Comomers do not show evident increase of the hardness following time. 2. Compomers show a marked decrease of setting degree as the depth of the material increases. In RMGIs, the setting degree at different depths does not significantly differ.

• Journal of Korean Philosophical Society
• /
• v.142
• /
• pp.221-241
• /
• 2017

I try to elucidate the essence of cinematic art in terms of Nietzsche's physiological philosophy of art. According to Nietzsche, the mise-en-$sc{\grave{e}}nes$ in the film are expressions of willingness to the power of the author, the director. These are not re-imitations of the imitations with Platonic measure, sinker, number, but framing the elan vital Erde, die $urspr{\ddot{u}}ngliche$ Vorstellung with the director's body-camera. In this context, the film is essentially die Kunst des Lebens, in which the body and the earth are mediated by cameras. Therefore, it is not the eyes or the head, but the body that is necessary to appreciate film art. But the body at this time does not mean the heavy body of Hollywood standard audiences manipulated, controlled, or transformed by capital. We should stand in front of the film work with body shaking between trauma and Rausch, a dancing body, and a light and fresh body. Only by watching film with the body, can we achieve the small revolutions in everyday life. For example, if we watch $B{\acute{e}}la$ Tarr's film The Turin Horse in such a way, we can no longer be the dwarfed human beings, der Herde-Mensch. Also, $B{\acute{e}}la$ Tarr's mise-en-scene will make us realize why Nietzsche had said that there is art to us not to be destroyed by the platonic truth.

• Journal of the Daesoon Academy of Sciences
• /
• v.45
• /
• pp.1-35
• /
• 2023

This study aims at determining the meaning of Life in The Canonical Scripture of the Daesoon Thought upon the ontological bases of occidental philosophies; especially upon those of Plato and Bergson. In western philosophy, the word ontology designates investigating the meanings of being, which is derived from the Greek 'onto (being)' and 'logia (logical discourse).' The various meanings of life have been sought from ancient times all over the world, for these are the critical and vital questions that pertain to the nature of human existence. Plato had asserted that life, in his word, soul, had three different kinds of aspects of meaning. Immortal, reciprocal, and divine. Plato scheme was such that the soul could die, but after death it could became reborn into another various forms of living creatures. The real inner life of humans, the soul, would live eternally. Henri-Louis Bergson, a famous French philosopher from the 20^th century, claimed that life had three different kinds of aspects. Self-identity, Élan vital (vital impetus) and liberty. Bergson insisted especially the real meaning of life had been characterized by "unité multiple et multiplicitéune," "unity as something multiple and multiplicity something singular." The meaning of life in Daesoon Thought could be said to have three different characteristics, solidarity, earthly immortality and grievance-resolution. Some similarities can be found between certain western ontological meanings of life and those of Daesoon Thought. Namely, the qualities of eternity, reciprocity, and divinity.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.613-623
• /
• 2000

The purpose of this study was to amount of the frictional forces with the brackets and wires, ligation methods, dry/wet, offsets, interbracket distances, velocity and to compare them each other by different conditions. This study tested 0.018'x0.025' slot sized 8 types of orthodontic bracket systems and 0.016', 0.016'x0.022' sized stainless steel, NiTi, Cu-NiTi orthodontic wires. One cuspid bracket were positioned on the slide glass and archwire was engaged into bracket and ligated with elastomeric modules. The values of frictional forces were measured with the instron universal testing machine. The results were as follows; 1. Polycrystalline ceramic bracket had the highest mean frictional forces and followed and by ceramic reinforced plastic bracket, metal bracket, plastic bracket with metal slot, monocrystalline ceramic bracket, single bracket, self-ligating bracket, friction free bracket in descending order. The self-ligating bracket showed low frictional forces in the round wires and high frictional forces in the rectangular wires. 2. Stainless steel wires had the least frictional forces and followed by NiTi, Cu-NiTi wires in descending order. Round wires had lower frictional forces then that of rectangular wires. 3. The stainless steel ligation method had significantly greater mean frictional forces them the elastomeric module ligation method. 4. Artificial saliva statistically increased the frictional forces in stainless steel wire, NiTi wire and Cu-NiTi wire. 5. There was a statistically significant difference with offset change 6. There was no statistically significant difference with interbracket distance in stainless steel wires but a significant difference in NiTi wires as the interbracket was decreased. 7 There was no statistically significant difference with velocity change. From the above findings, self-ligating bracket, stainless steel wires and the elastomeric module ligation method might be effective than any other materials to reduce the frictional forces in the orthodontic treatment and can be correlated to clinical situations seen in orthodontic patient care.

• The Korean Journal of Nuclear Medicine
• /
• v.33 no.3
• /
• pp.306-315
• /
• 1999

Purpose: We performed this study to evaluate the process of radiation induced apoptosis in A431 skin epithelial cancer cell line. Materials and Methods: Low to high dose radiation (0, 2, 5, 10, 25 Gy) was given to A431 cells by Cs-137 cell irradiator. Apoptosis was evaluated by cell morphology, dye exclusion test, and DNA laddering. Results: Cell viability decreased as the radiation dose increased. Number of apoptotic bodies increased as radiation dose increased. It increased most significantly at 12 hours after irradiation. Lactate dehydrogenase activity in culture medium increased according to radiation dose and time after irradiation. DNA ladders could be identified in irradiated cells, but, it had no correlation with radiation dose or time after irradiation. Conclusion: Radiation-induced apoptosis which was the main course of cell death in A431 cells could be analyzed quantitatively by counting apoptotic bodies under microscope. Apoptosis increased as radiation dose increased.

• The Korean Journal of Nuclear Medicine
• /
• v.34 no.3
• /
• pp.252-259
• /
• 2000

Purpose: The purpose of this study was to compare the radiation adaptive response (RAR) in peripheral lymphocytes (PL) of patients induced by Tc-99m MDP and Tc-99m DTPA scintigraphies. Materials and Methods: Lymphocytes from 45 patients (25 males, 20 females, mean age $44{\pm}18$ years) were collected before and after scintigraphies using 740 MBq Tc-99m MDP (n=22) or Tc-99m DTPA (n=23). Lymphocytes from 20 controls (12 males, 8 females, mean age $43{\pm}7$ years) were also collected. They were exposed to challenge dose of 2 Gy ${\gamma}-rays$ using a Cs-137 cell irradiator Number of ring-form (R) and dicentric (D) chromosomes was counted under the light microscope. From them a representative score, Ydr, was calculated as Ydr=(D+R)/cells. Adaptation index (AI) was defined as difference of Ydr between unconditioned and conditioned lymphocytes. Ydr was also measured after an administration of cycloheximide (CHM), a protein synthesis inhibitor, before challenge dose. Results: RAR was induced in both groups of patients. CHM abolished the adaptive response in both groups. AI of Tc-99m MDP group was significantly higher than that of Tc-99m BTPA group. Conclusion: Tc-99m MDP induced RAR was more prominent than those induced by Tc-99m DTPA.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.6
• /
• pp.889-894
• /
• 1998

This study was designed as a part of efforts to investigate the biochemical pollutant markers for diagnosis of marine pollutions by changes in oxygen radicals and their scavenger enzymes of the flounder (Paralichthys olivaceus) in the South Sea of Korea. Protein contents in brain and muscle of cultured flounder in the South Sea were remarkably lower ($19\~42\%$ and $25\~41\%$, respectively) than those of wild flounder in Pohang of the East Sea as a control group. Lipid Peroxide (LPO) levels in serum of cultured in the South Sea were considerably higher ($5\~33\%$) Elan those of wild flounder in Pohang. Hydroxyl radical formations in serum of cultured flounders in the South Sea were lower ($4\~25\%$) than those of wild flounders in Pohang. Superoxide dismutase (SOD) activities in serum of cultured flounders in South Sea were also significantly lower ($7\~31\%$) than those of wild flounders in Pohang. It is believed that significant decrease of protein contents in brain and muscle, and remarkable increases of LPO in serum of cultured flounders may be used as a biochemical pollutant markers for diagnosis of marine pollutions. These results suggest that near-coastal water as well as neritic water of the South Sea might be affected by pollutant input as well as the Yellow Sea of Korea.