• 상하수도학회지
• /
• 제21권6호
• /
• pp.763-770
• /
• 2007

There are many design parameters affecting filtration efficiency such as filteration rate, media packing depth, size distribution, and so on. The sphericity, the ratio of the surface area of an equal volume sphere to the real surface area of the particles, is one of major physical characters of media. The effect of sphericity on the performance of anthracite filter has been investigated. Media from eight water treatment plants have been collected. The sphericity of each media has been calculated by using well known headloss equations such as Kozeny equation, Dahmarajah equation etc.. Columns packed with anthracite media having different sphericity have been used to compare headloss development, floc accumulation in the bed, particles in bed water, filtrate turbidities after backwash and so on. The repeated experiments have indicated that the sphericity of anthracite media may not have remarkable influence on the filter performance as it has been suspected. It also has been prospected in the experiment that the media of higher sphericity would store more particles in the bed and give better filtrate quality, if provided that the effective size and the size distribution of media would be the same.

• 한국측량학회지
• /
• 제8권2호
• /
• pp.45-51
• /
• 1990

수치표고모델은 실제지형모델의 참값과 비교하여 충분하고 높은 정확도를 지녀야 하며, 미리 주어져 있는 지형데이타와 보간법을 사용하여 임의의 평면위치(X, Y)에 대응하는 표고 h를 구하고 경사를 구할 수 있는 모텔을 만들어 놓아야 한다. 보간의 정확도는 지형의 기복 상태와 자료의 밀도에 우선적으로 영향을 받게 되므로, 지형을 객관적인 방법으로 분류할 필요가 있다. 평균경사도와 면적비는 지형이 경사상태에 따라 비슷한 분류 결과를 가져오는 변수이지만, 지형의 국소적인 변화크기를 동시에 표시하는 변수는 면적비이다. 그러므로 본 연구는 지형의 분류를 좀 더 객관화하기 위하여 비고에 의해서가 아니라 경사도에 의해 분류하고, 경사와 곡률경중율의 영향을 분석하여 그 경사도에 합당한 매개변수를 도입하므로써 보다 현실에 가까운 모델을 재현하는데 연구의 목적이 있다. 연구의 결과는 첫째, 경사에 의한 지형의 분류는 평지는 pl6과 p24 준경사지 pl6과 S, 급경사지는 S 와 p24가 적합하고 곡률에 의한 분류는 평지와 준경사지에서 모두 p24와 S가 적합하며, 급경사지에서는 pl6이 적합하였다. 경사와 기복 변화량을 조합한 경우는 평지는 pl6, 준경사지는 p24, 급경사지는 S가 각각 적합하였다. 둘째, 유형화율은 경사 50%, 곡률경중율 0.0015에서 50∼80%로 가장 컸다.

• Journal of Mechanical Science and Technology
• /
• 제15권4호
• /
• pp.459-464
• /
• 2001

The effects of internal air-pressing on deep drawability are investigated in this study to increase the deep drawability of aluminum sheet. The conventional deep drawing process is limited to a certain limit drawing ratio(LDR) beyond which failure will occur. The intention of this work is to examine the possibilities of relaxing the above limitation through the deep drawing with internal air-pressing, aiming towards a process with an increased drawing ratio. The idea which may lead to this goal is the use of special punch that can exert high pressure on the internal surface of deforming sheet during the deep drawing process. Over the ranges of conditions investigated for Al-1050, the local strain concentration at punch nose radius area was decreased by internal air-pressing of punch, and the deep drawing with internal air-pressing was proved to be very effective process for obtaining higher LDR.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제8권1호
• /
• pp.33-41
• /
• 2004

The type of trichomes, their density and pattern of distribution on leaves of 16 genotypes of mulberry, belonging to both diploid and polyploid categories, were studied by scanning electron microscope. The present investigation was undertaken to find out the relationship of physical attributes, especially the density and trichome types with higher acceptability and better rearing performance by the silkworm Bombyx-mori L. Two types of trichomes glandular and non-glandular types were observed on both the leaf surfaces of all the mulberry genotypes studied. In general, greater densities of trichomes were observed on the abaxial surface than the adaxial surface of leaves in most of the genotypes. Distribution of glandular trichomes were more in abaxial surface and non-glandular trichomes were more in adaxial surface. Overall, distribution of glandular and non-glandular trichomes per unit area of leaf did not follow any regular pattern. When leaves of those genotypes were fed to silkworms, trichome density was found to be significantly negatively correlated with the survival of larvae i.e., effective rate of rearing, but trichome density did not influence the economic characters of rearing. As the distribution of glandular trichomes (GT) and non-glandular trichomes (NGT) did not follow any definite pattern, no relation could be established between the GT and NGT densities with silkworm rearing performance. However, the ratio of GT and NGT in a particular genotype influenced the rearing parameters, higher the ratios better the rearing performance. High GT and NGT ratio (＞1.00) was found positively significant when correlated with economic parameters viz., larval weight, single cocoon weight and single shell weight. The study is useful in screening different mulberry genotypes for their better acceptability to silk-worm and higher rearing performance at the early stage of selection without actually conducting the rearing.

• 한국농공학회논문집
• /
• 제55권2호
• /
• pp.77-85
• /
• 2013

The aim of this study is to investigate strength and water purification characteristics of effective microorganism-applied volcanic ash block using flexural strength test and water quality analysis. The specimens were prepared with volcanic ash from Mt. Baekdusan and Mt. Hallasan, and cement as the ratios of 3.5:1, 4.0:1, 4.5:1, 5.0:1 with and without metakaolin. Flexural strength degraded with increasing of the amount of volcanic ash, and increased with addition of metakaolin as a binder. Based on these results, the optimal ratio for fabricating volcanic ash-cement mixture block is determined as 3.5:1 with metakaolin. Furthermore, from water quality analysis on contaminated water, removal ability of effective microorganism-applied volcanic ash-cement mixture block and caged volcanic ash block against T-N, T-P and SS was highly evaluated because of adsorption due to the large specific surface area of volcanic ash. Hence, volcanic ash-cement mixture block and caged volcanic ash block possibly contribute to water purification.

• 한국태양에너지학회 논문집
• /
• 제34권4호
• /
• pp.111-122
• /
• 2014

The purpose of this study is to understand daily variation of short-wave radiation trends according to the state of surface and observation of atmosphere conditions in downtown and suburban observation area. The followings are main results from this study. 1) We found out daily air temperature variation of downtown is less than that of suburban area because of bigger heat capacity of artificial elements such as massive buildings and pavements. 2) It is more effective to estimate of air condition by water vapor pressure than relative humidity in the atmosphere. 3) The difference of solar radiation ratio between downtown and suburban area is dependant on different atmosphere conditions at two observation stations.

• Fisheries and Aquatic Sciences
• /
• 제17권1호
• /
• pp.47-57
• /
• 2014

Thai Jasmine rice (Oryza sativa, long grain Indica var.) is popular in southeastern Asia and China due to its non-glutinous, fluffy texture and fragrant smell. However it has a high starch digestibility, which leads to an increased glycemic index (GI). Therefore it may require modified cooking methods for diabetes patients. The objectives of this study were to optimize the ratio of Thai Jasmine rice, sea tangle, and olive oil (CLTR) based on consumers' acceptance. The GI of plain cooked Thai Jasmine rice (CLR) was measured as a control. Sensory evaluation and response surface methodology were used to determine the optimal ratio. Texture analysis and nutritional evaluation were also performed on the optimal recipe of cooked Jasmine rice with sea tangle. A multiple regression equation was developed in quadratic canonical polynomial models. We used 26 trained Chinese panelists in their forties to rate color, flavor, adhesiveness, and glossiness, which we determined were highly correlated with overall acceptability. The optimal CLTR formula was 34.8% rice, 2.8% sea tangle, 61.9% water, and 0.5% olive oil. Compared to CLR, CLTR had a lower hardness, but a higher springiness and cohesiveness. However, CLR and CLTR had the same adhesiveness and chewiness. The addition of sea tangle and olive oil delayed retro-gradation of starch in CLTR and increased total dietary fiber, and protein and ash contents. The degree of gelatinization, and in vitro protein and starch digestibility of CLTR were lower than those of CLR. Based on Wolver' method, the GI of CLTR (52.9, incremental area under the glycemic-response curve, ignoring the area below fasting, as used for calculating the GI [Inc]) was lower compared with that of CLR (70.94, Inc), which indicates that CLTR is effective in decreasing and stabilizing blood glucose level, owing to its lower degree of gelatinization and starch digestibility. Our results show that CLTR can contribute to the development of a healthier meal for families and the fast food industry.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.270-270
• /
• 2016

We fabricated an organic-inorganic nano laminated encapsulation layer using molecular layer deposition (MLD) combined with atomic layer deposition (ALD). The $Al_2O_3$ inorganic layers as an effective single encapsulation layer were deposited at 80 degree C using ALD with alternating surface-saturation reactions of TMA and $H_2O$. A self-assembled organic layers (SAOLs) were fabricated at the same temperature using MLD. MLD and ALD deposition process were performed in the same reaction chamber. The prepared SAOL-$Al_2O_3$ organic-inorganic nano laminate films exhibited good mechanical stability and excellent encapsulation property. The measurement of water vapor transmission rate (WVTR) was performed with Ca test. We controlled thickness-ratio of organic and inorganic layer, and specific ratio showed a lowest WVTR value. Also this encapsulation layer contained very few pin-holes or defects which were linked in whole area by defect test. To apply into real OLEDs panels, we controlled a film stress from tensile to compressive and flexibility defined as an elastic modulus with organic-inorganic ratio. It has shown that OLEDs panel encapsulated with nano laminate layer exhibits better properties than single layer encapsulated in acceleration conditions. These results indicate that the organic-inorganic nano laminate thin films have high potential for flexible display applications.

• 한국인쇄학회지
• /
• 제25권1호
• /
• pp.43-52
• /
• 2007

Offset printing is one of the well known printing technique of lithographic process and consists of image area and 'non-image area on a flat image carrier. The surface tension of dampening water can be controlled by adding IPA after mixing of raw water and etching solution. The etching solution contains a surfactant for reducing surface energy, a clean agent for non-imaging area, wetting agent for protecting non-imaging area from oil components like ink and also an emulsifying agent for controlling emulsification. In this study, the present situation of dampening water maintenance has examined by collecting dampening water using at domestic companies. The pH related to dampening water, conductivity, contact angle, emulsification curve are measured to define the current situation of dampening water control of each companies and to analyze the relationship among measured properties. In the study most of companies among 16 printing companies tested controlling dampening water through pH value. However, the quality of printing has varied depending upon conductivity, contact angle, IPA content, and emulsification value. The control of dampening water should be carry at the state of the standard when adding proper ratio of etching solution. It would be more effective when pH or conductivity control carries out in parallel with controlling dampening water. Therefore the concept that pH5.5 is correct is based concept. Based on these initial tests it is defined that the standardization of dampening water control is required.

• 통합자연과학논문집
• /
• 제7권3호
• /
• pp.214-218
• /
• 2014

The main objective of this study is to analyse the influence factors of snowfall enhancement by glaciogenic seeding in a mountainous area. Twenty-five seeding experiments have been conducted during the period of February to April 2010. To use two rates seeding experiments (SR1: $1.04g\;min^{-1}$, SR2: $2.08g\;min^{-1}$) have been tested to get an appropriate ratio for snowfall enhancement at Daegwallyeong area. The conditions of seeding are able as followings: surface temperature <$0^{\circ}C$, wind speed <5 m/s, wind direction between 0 and $130^{\circ}$. The experiment results indicated that in the case of SR1 was more effective than SR2. The number of small ice particles below 1.0 mm was increased during seeding period measured by PARSIVEL disdrometer near generator. Most of snowfall enhancement by seeding was observed the inflow of the easterly wind blew in toward Gangwon regions from the East Sea and the supersaturated supercooled liquid water due to orographic effect.