• 정보처리학회논문지B
• /
• 제8B권5호
• /
• pp.441-446
• /
• 2001

글로벌 네트워크 시대에는 전세계적으로 흩어져 있는 수많은 컨텐츠가 실시간으로 위한 생활의 스며들 것이며 그로 인해 많은 변화를 줄 것이다. 아울러 컨텐츠 및 다양한 모델 제공 업체들의 환경은 급속하게 변화 할 것이다. 인터넷이나 무선 인터넷으로 컨텐츠나 모델들을 적시에 활용할 수 있는 점은 기업측면에서 의사결정 프로세스를 변화시키며, 공급체인 상에서 많은 기업들이 자신들의 의사결정에 필요로 하는 정보나 모델을 짧은 시간에 탄력적으로 제공 받을 수 있어서 기업이 환경변화에 대한 높은 대응력을 갖출수 있게 한다. 이 논문은 컨텐츠와 모델을 필요로 하는 기업들에게 효과적이면서 효율적으로 제공하기 위한 메타지식의 생성 메커니즘을 제안하는 것이다. 그리고 본 논문에서 제안한 메커니즘을 통해서 실험결과를 얻었으며, 그 결과를 가지고 이 논문에서 제시한 탄력적인 컨텐츠나 모델 제공 이론이 인터넷이나 모바일 네트워크에서 요약된 모델 제공과 트래픽 감소 측면에서 매우 우수함을 보이고 있다.

• 한국ITS학회 논문지
• /
• 제11권6호
• /
• pp.145-154
• /
• 2012

본 논문은 고속도로 터널구간을 대상으로 교통사고특성을 다각적으로 분석하여 다양한 독립변수를 선정하고 종속변수를 건, 건/km, 건/백만대km로 다양화하여 다중선형회귀모형을 개발하였다. 그리고 개발된 모형들은 상호 비교 검토하여 최종적으로 교통사고영향요인으로 구성된 신뢰성 있는 교통사고예측모형을 결정하였다. 교통사고예측모형은 모형의 $R^2$, F값 등 검정통계량 수준, 다중공선성, 잔차분석 등 모형검증과정이 수행되었고 터널구간의 교통사고특성 반영여부 등을 검토하여 최종적으로 터널길이에 따라 총 2개의 모형을 선정하였다. 선정된 종속변수는 ln(건/백만대km)이며, 독립 변수는 연평균일교통량(AADT), 종단구배, 터널높이로 구성되었다. 추정모형은 RMSE, MAE를 이용하여 예측한 값과 실제 관측값과의 차이를 분석하여 터널구간의 교통사고를 설명하는데 적합한 모형으로 파악되었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제42권
• /
• pp.24.1-24.7
• /
• 2020

Background: In daily practice, three-dimensional patient-specific jawbone models (3D models) are a useful tool in surgical planning and simulation, resident training, patient education, and communication between the physicians in charge. The progressive improvements of the hardware and software have made it easy to obtain 3D models. Recently, in the field of oral and maxillofacial surgery, there are many reports on the benefits of 3D models. We introduced a desktop 3D printer in our department, and after a prolonged struggle, we successfully constructed an environment for the "in-house" fabrication of the previously outsourced 3D models that were initially outsourced. Through various efforts, it is now possible to supply inexpensive 3D models stably, and thus ensure safety and precision in surgeries. We report the cases in which inexpensive 3D models were used for orthodontic surgical simulation and discuss the surgical outcomes. Review: We explained the specific CT scanning considerations for 3D printing, 3D printing failures, and how to deal with them. We also used 3D models fabricated in our system to determine the contribution to the surgery. Based on the surgical outcomes of the two operators, we compared the operating time and the amount of bleeding for 25 patients who underwent surgery using a 3D model in preoperative simulations and 20 patients without using a 3D model. There was a statistically significant difference in the operating time between the two groups. Conclusions: In this article, we present, with surgical examples, our in-house practice of 3D simulation at low costs, the reality of 3D model fabrication, problems to be resolved, and some future prospects.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권3호
• /
• pp.1702-1721
• /
• 2019

A workflow process (or business process) management system helps to define, execute, monitor and manage workflow models deployed on a workflow-supported enterprise, and the system is compartmentalized into a modeling subsystem and an enacting subsystem, in general. The modeling subsystem's functionality is to discover and analyze workflow models via a theoretical modeling methodology like ICN, to graphically define them via a graphical representation notation like BPMN, and to systematically deploy those graphically defined models onto the enacting subsystem by transforming into their textual models represented by a standardized workflow process definition language like XPDL. Before deploying those defined workflow models, it is very important to inspect its syntactical correctness as well as its structural properness to minimize the loss of effectiveness and the depreciation of efficiency in managing the corresponding workflow models. In this paper, we are particularly interested in verifying very large-scale and massively parallel workflow models, and so we need a sophisticated analyzer to automatically analyze those specialized and complex styles of workflow models. One of the sophisticated analyzers devised in this paper is able to analyze not only the structural complexity but also the data-sequence complexity, especially. The structural complexity is based upon combinational usages of those control-structure constructs such as subprocesses, exclusive-OR, parallel-AND and iterative-LOOP primitives with preserving matched pairing and proper nesting properties, whereas the data-sequence complexity is based upon combinational usages of those relevant data repositories such as data definition sequences and data use sequences. Through the devised and implemented analyzer in this paper, we are able eventually to achieve the systematic verifications of the syntactical correctness as well as the effective validation of the structural properness on those complicate and large-scale styles of workflow models. As an experimental study, we apply the implemented analyzer to an exemplary large-scale and massively parallel workflow process model, the Large Bank Transaction Workflow Process Model, and show the structural complexity analysis results via a series of operational screens captured from the implemented analyzer.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.703-710
• /
• 2003

In the sub-surface environments, detection of the movement of contaminant substances and recharge of groundwater by rainfall are very important factors which contain porosity and effective porosity of porous media. In this paper, the applicability of permittivity methods and proposed dielectric mixing models (DDMs) are discussed. This study showed that the ratio of effective porosity to porosity of Toyoura and River sands were 0.856 and 0.843. From the relationships between the relative porosity and effective porosity, all measured values can be confirmed to outside the range to about 0.800 for Toyoura and River sands under all experiments by FDR and FDR-V systems. In the study, this permittivity equipment can be considered to be good enough to measure determining the physical parameters of saturated soils. Consequently, this permittivity method can be contributed to estimate a porosity and effective porosity of saturated porous media because it is easy and instantaneous than previous in-situ methods.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.359-367
• /
• 2004

In this research on-line model for the prediction of the effective strain distribution in strip on finishing mill process is presented. To describe the effective strain distribution in strip, three guide points and a distribution fitting variable are used. On-line models to get these points and fitting variable non-dimensionalization method and least square method were used with FEM simulation results. The model is developed using strip only FEM simulation as reference sets and compared with roll coupled FEM simulation results as perturbed sets. The on-line model to describe effective strain distribution shows good agreement with coupled FEM analysis results.

• 한국임상약학회지
• /
• 제27권2호
• /
• pp.55-62
• /
• 2017

Experiential education is a core curriculum of pharmacy education. In experiential education, formative feedback is an integral component of learning and teaching process. Feedback is defined as information provided by a preceptor regarding student's performance based on direct observation. With effective feedback, students can have opportunities to reinforce or correct behaviors and to acquire knowledge or skills. Students highly value and appreciate feedback. They rank provision of effective feedback as one of the most important qualities of preceptors. Preceptors, however, lack an understanding of feedback or practical skills necessary for providing effective feedback. As a result in reality, the feedback provided to students can be differentially effective in improving students' learning. This article describes a theoretical understanding of feedback including definition and value, as well as types of feedback. In addition, practical aspects in providing feedback, such as contents, timing, techniques, and models, are addressed. By understanding the value of feedback and mastering various feedback skills, preceptors will promote students' learning and enhance educational outcomes of experiential education.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.75-80
• /
• 1999

The water requirement of crops in paddy fields is composed of evapotranspiration and infiltration. The determination of effective rainfall has the great significance for the irrigation managements and system design. There are numerous methods to estimate effective rainfall. The FreeBoard Model(FBM), ond of them , is popular because it can describe the algorithm of effective rainfal with simplified and general formation. The purpose of this study is to evaluate effective rainfall by field measurement , to compare this closely with the results from freeboard model and modified freeboard model , and to find out which of two models is more consistent with the results obtained by measurements.

• 디지털융복합연구
• /
• 제12권8호
• /
• pp.423-430
• /
• 2014

본 연구의 목적은 뇌졸중 동물 실험 모델에서 환경 강화는 기능 회복을 향상 시키고 이로 인하여 뇌에 형태학적, 생화학과 행동에서 특징적인 변화와 그 효과들을 소개하고, 뇌졸중 환자에 환경 강화의 적용은 재활치료 및 작업치료를 포함한 다양 치료와 전 임상 실험의 중요성을 설명하고자 한다. 이 종설 논문에서는 주로 뇌졸중 동물 실험 모델에서 환경 강화로 인한 기능적 회복에 대한 효과와 신경 친화성 물질, 특정 단백질의 발현 및 임상 적용 사례 등의 연구 결과들을 소개하였다. 마지막으로 임상에서 뇌졸중 환자에게 환경 강화의 적용 가능성과 작업치료 및 재활치료의 관점에서 설명하였다.

• 제어로봇시스템학회논문지
• /
• 제10권5호
• /
• pp.450-457
• /
• 2004

In this research, the automatic synthesis of knowledge models is proposed. which are the basis of the methods using qualitative models adapted widely in fault diagnosis and hazard evaluation of chemical processes. To provide an easy and fast way to construct accurate causal model of the target process, the Role-Behavior modeling method is developed to represent the knowledge of modularized process units. In this modeling method, Fault-Behavior model and Structure-Role model present the relationship of the internal behaviors and faults in the process units and the relationship between process units respectively. Through the multiple modeling techniques, the knowledge is separated into what is independent of process and dependent on process to provide the extensibility and portability in model building, and possibility in the automatic synthesis. By taking advantage of the Role-Behavior Model, an algorithm is proposed to synthesize the plant-wide causal model, Fault-Causality Graph (FCG) from specific Fault-Behavior models of the each unit process, which are derived from generic Fault-Behavior models and Structure-Role model. To validate the proposed modeling method and algorithm, a system for building FCG model is developed on G2, an expert system development tool. Case study such as CSTR with recycle using the developed system showed that the proposed method and algorithm were remarkably effective in synthesizing the causal knowledge models for diagnosis of chemical processes.