• Journal of Korean Society of Forest Science
• /
• v.85 no.4
• /
• pp.557-564
• /
• 1996

Based on stem analysis as well as branch analysis data of each tree from 8 plots of circle clear-cutting and 1 biomass plot in Changbai Mountain area, located in Northeast of China, the effective crown form of Changbai larch(Larix olgensis H.) plantation were studied by using the approach of crown curve. The results indicated that the cross-section forms of effective crown were stable and showed approximate circle for different tree size. Because the effective crown was on upper position of the canopy and its form reflects crown architecture under non-competition condition, the architecture is mainly affected by species hereditary feature. Therefore, for the specified species the effective crown form was thought to be relatively stable. The effective crown form of tree was neither related to the tree size within stand nor to the stand condition for different stand. The total effective crown curve of larch plantation could be characterized by using mean effective crown taper.

• Journal of the Korean Society of Tobacco Science
• /
• v.13 no.1
• /
• pp.36-42
• /
• 1991

The present study was conducted to obtain some basic information on the shoot formation from crown gall callus and the characteristics of teratoma shoot derived from crown gall induced by inoculation of Agrobacterium tumefaciens C58. Crown gall callus could be continuously cultured on the phyohormone free basic medium. The growth of crown gall callus was inhibited when BA were added to the cultural media. Shoot formation from crown gall callus fail to be initiated except teratoma shoot which induced on the phytohormone free medium after several subculture on rare occasions. Teratoma shoot could not form root and grow as normal shoot. Addition of BA to cultural media was not effective for shoot elongation, reduction in multiple shoot formation, but IBA was somewhat effective for shoot elongation of teratoma shoot, never for root formation.

• Korean Journal of Plant Tissue Culture
• /
• v.27 no.2
• /
• pp.101-107
• /
• 2000

The explants of yacon (Polymnia sonchifolia Poeppig & Endlicher) were cultured to invest th8e dedifferentiation condition, and formative callus from leaf was cultured to find the regeneration and micro-crown bud formation. Basal MS medium was more effective to form callus than 1/2 MS and B$_{5}$ medium. Calli formations from leaf, petiole and lateral bud were more effective on MS medium supplemented with 1.0, 2.0 mg/L 2,4-D and 0.2, 0.4 mg/L kinetin or BA than 1.0, 2.0 mg/L NAA and 0.2, 0.4 mg/L kinetin or BA. Formative callus from leaf was proliferated about 70% on medium supplemented with 1.0 mg/L BA. When callus was proliferated, 63% regeneration rate was shown on medium supplemented with 1.0, 2.0 mg/L BA in case of subculture for 3~4 months but was not shown on medium supplemented with 1.0, 2.0 mg/L kinetin. Micro-crown bud formed as addition of BA at 3~4 months after callus culture and then was obtained many at 5~6 months, it was most formed about 82% on medium supplemented with 5 mg/L BA. Rate of micro-crown bud formation was increased as more over 5 mg/L BA concentration, when this time, however, shoot had thick leaves and short internodes, and then withered before long, Micro-crown bud was formed about 88.0% on medium supplemented with 5% sucrose, that was more increased 28% than with 3% sucrose. The buds of crown bud between harvested in field and formed in vitro were difference only in size, but both were similar in shape according to histological view.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.2
• /
• pp.199-205
• /
• 2012

Although the stainless steel crowns have been recognized as the most effective and durable form of restoration for primary molars, they have been regarded by many dentists as having definite demerits such as invasive nature of procedural complexity and behavioral aspects of children. As an alternative to conventional technique of stainless steel crown restoration, the Hall technique was first introduced in 1988, which is characterized by just pushing the pre-contoured, cement filled crown form onto the abutment molar with no local anesthesia, no caries removal, no tooth preparation. According to several reports, this can slow, arrest, or even reverse the progress of caries. In addition, its atraumatic feature gives less discomfort and stress to children than conventional one, which is thought excellent especially in younger children. Also, It has been reported to be effective and acceptable to dentist, child patients and their parents. In this case study, three children with age of 4 years 5 months, 4 years 10 months, 6 years 4 months were treated with stainless steel crowns using Hall technique on first primary molar respectively. The teeth were free from pulpal, periapical pathology. After follow up of about 3 to 6 months period, the results showed clinically successful outcomes without any marked complication in pulp, tooth or soft tissue till now. But, it should be kept in mind that this technique is not proper to every child, every carious molar, or every dentist. Thorough distinction of indicated cases and continuous follow-up check is highly required. Conclusively, Hall technique might be an effective and realistic minimally invasive alternative for the carious primary molars especially in younger or disabled children, despite potential doubts on its efficacy and some definite limitations.

• The International Journal of Costume Culture
• /
• v.7 no.2
• /
• pp.151-157
• /
• 2004

This research is to conservate the old hat and restore its shape and place it on a supportive form in a stable protective container. The hat is a homemade construction, utilizing three different machine made laces, and two cotton net fabrics. The exterior, particularly the top crown piece, as well as the lace along the brim's edge has been generally soiled and discolored. Inside the crown, the cotton net has broken threads, and thread loss in several areas. The paper covering the two wires is very weak, and has discolored the lace in the areas of contact. The plastic buckles of the velvet ribbon have also discolored the areas where there is contact. The wash/bleach bath procedure was very effective. Virtually all of the light brown surface discoloration stains were removed. The darker brown spots, particularly concentrated around the two paper covered wires and assumed to be rust, were $90\%$ removed by the treatment. The brown spots apparently were due to the degradation of the paper covering, and not caused by the wire itself. The buckram foundation lost about $50\%$ of its stiffness, but this was not a major concern due to the fact that this hat should remain it its mount, which has been designed to serve for both storage and exhibition purposes.

• Asian Journal of Turfgrass Science
• /
• v.25 no.2
• /
• pp.133-137
• /
• 2011

Winterkill can be defined as any injury including freeze stress kill, winter desiccation, and low temperature disease to turfgrass plants that occurs during the winter period. The major damages from winterkill were low temperature kill, crown hydration, and winter desiccation. Low temperature kill is caused by air and soil temperature. Soil temperature affect more severe to turfgrass than air temperature because low soil temperature cause fetal damage to turfgrass crown. Crown hydration is a form of winter injury in which intercellular water within the plant freezes and causes physical injury to the cell membrane and wall. This is eventually resulted in dehydration of cell. Winter desiccation is the death of leaves or whole plants due to drought during the winter period. To reduce winterkill damage, cultivar selection is very important. If changing cultivar is not allowed, cold temperature hardiness needs to be increased by providing nutrients especially phosphorus and potassium in the late fall. Turf cover is effective way to reduce winterkill damage. Remaining snow is positive process to reduce winterkill damage by insulating soil temperature. The previous researches reported many materials as turf cover such as straw, polypropylene, polyester, and wood mat. Aeration and topdressing is one of the process against winterkill. Both methods are mainly conducted to reduce thickness of thatch layer. In recent, relatively new materials called black or winter topdressing sand are used to protect soil temperature from low air temperature and thaw ice crystal that may remain in soil.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.2
• /
• pp.118-126
• /
• 2004

Recombinant E.coli ACV 1003 (recA::lacZ) releasing ${\beta}$-galactosidase by a SOS regulon system, when exposed to DNA-damaging compounds, have been used to effectively monitor endocrine disruptors. Low enzyme activity of less than 10 units/mL, corresponding to a $\mu\textrm{g}$/L(ppb) range of an endocrine disruptor (tributyl tin, bisphenol A. etc.), can be rapidly determined, not by a conventional time-consuming and tedious enzyme assay, but by an alternative interferometric biosensor. Heavily boron-doped porous silicon for application as an interferometer, was fabricated by etching to form a Fabry-Perot fringe pattern, which caused a change in the refractive index of the medium including ${\beta}$-galactosidase. In order to enhance the immobilization of the porous silicon surface, a calyx crown derivative (ProLinker A) was applied, instead of a conventional biomolecular affinity method using biotin. This resulted in a denser linked formation. The change in the effective optical thickness versus ${\beta}$-galactosidase activity, showed a linear increase up to a concentration of 150 unit ${\beta}$-galactosidase/mL, unlike the sigmoidal increase pattern observed with the biotin.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.1
• /
• pp.46-51
• /
• 2004

Talon cusp is cusp-like structure that develops additionally in crown of anterior tooth. And it is one of dental anomalies. Talon cusp can cause various diagnostic, functional, aesthetic problems depending on the size and configuration of cusp. there is a tendency for caries to occur in the developmental grooves, and advanced attrition, periodontal problems, irritation the tongue and temporomandibular pain, occlusal interference and displacement of affected tooth may result. Therefore, early diagnosis and appropriate treatment of each case is important so that it minimize local problems, such as caries, periodontal diseases, and malocclusion. These cases which are in permanent and primary anterior teeth are about gradual reduction forming reparative dentine and complete reduction of talon cusp and root canal therapy which is an alternative and effective form of treatment when gradual reduction of talon cusp may not be possible.

• Journal of Korean Society of Forest Science
• /
• v.7 no.1
• /
• pp.40-44
• /
• 1968

1. The larvae of the pine gall-midge begin to grow slowly from early July but grow rapidly from September. 2. The number of larvae in the galls does not decrease during the feeding period. 3. Pine needles infested by pine gall-midge cease to grow as soon as the gall starts to form. 4. In Seoul district the effective felling season of the pine trees for the Control of the pine gall-midge seems to be around 20th September when the size of larvae reaches 1.4-1.5mm in length. 5. The stratification and direction of the Crown, and the length of new shoot had no effect on the degree of infestation by pine gall-midge. However the degree of infestation differed among the trees of different ages as well as at the different levels of the mountain.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.1
• /
• pp.9-20
• /
• 2015

Ultraviolet radiation (UV) is a major cause of skin photoaging, and effective UV protecting agents are needed for the skin health and beauty. This study was undertaken to examine the effects of Bambusae caulis in Taeniam extract (BCTE) on UVB-induced cell death, oxidative stress and matrix metalloproteinase 1 (MMP1) expression in cell-based assays. HaCaT human keratinocytes were exposed to UVB in the presence of BCTE at different concentrations and resulting changes in cell viability and biochemical events were determined. The results showed that BCTE enhanced the viabilities of UVB-exposed cells, and attenuated apoptotic events such as cleavage of procaspase 3 to its active form, and the increase of Bax to Bcl-2 ratios. BCTE also attenuated the reactive oxygen generation and lipid peroxidation in cells exposed to UVB. Additionally, it attenuated the expression of matrix metalloproteinase 1 and the phosphorylation of c-Jun N-terminal kinase stimulated by UVB. Conclusively, the present study demonstrated that BCTE pro tected skin cells from the UVB-induced cell death, oxidative stress and MMP1 expression, suggesting its potential use as a cosmetic ingredient mitigating some features of the skin photoaging.