• Tribology and Lubricants
• /
• 제32권1호
• /
• pp.18-23
• /
• 2016

The effective case depth for case-hardened rolling bearing has been discussed. For this purpose, rolling contact fatigue tests for ball bearings built with inner race of various hardness values were conducted until L₁₀ calculating rating life using a bearing life test machine under radial loading. Then, the distribution of residual stress below the inner raceway, which depended on the hardness value, was measured by X-ray diffraction. As a result, the linear relationship was established between the hardness value of the inner race and the theoretical shear stress evaluated at the depth where the residual stress disappeared below the inner raceway. Based on the relationship, it could be found that the factor of safety in bearing manufacturer’s rules for the effective case depth of case hardened rolling bearings was set higher. However, it could be also found that the hardness values at the depth where the maximum shearing stress acted below the raceway surface in a tapered roller bearing hardened by the carburizing process, were not sufficient for preventing plastic deformation under the basic dynamic load rating. Consequently, further efforts were still required to reduce or to disperse the contact load on the material design of a rolling bearing in order to prolong its life.

• 한국해양공학회지
• /
• 제5권1호
• /
• pp.71-80
• /
• 1991

This paper reveals the effect of the effective case depth(ECD) on the fatigue behavior of a high-frequency induction hardened SM45C in rotated bending fatigue test. In addition, the effects of fracture modes(surface origin type, inner origin type) on it are discussed. The fatigue limit of the induction hardened steel is remarkably increased compared with that of base metal. In addition, the fatigue limit is linearly increased as the effective casedepth grows deep in the region of this experiment (ECD/R;0.23-0.49). The S-N curve and fracture mode in the induction case hardened steel are classified into two kinds, as a result : N$_{f}$<10$^{5}$ ;surface origin type fracture(at high stress), N$_{f}$>10$^{5}$ ; in ner origin type fracture(at low stress). In case of inner origin type fracture; as the effective case depth(ECD) gets deep, the fatigue limit is increased by the reason that the fracture origin moves toward center; in reverse, is decreased by reason that the compressive residual stress gets low. As a result, the increasing effect of the former is much bigger than the decreasing effect of the latter, and the fatigue limit is increased as the ECD gets deep.eep.

• Journal of the Korean Data and Information Science Society
• /
• 제19권2호
• /
• pp.463-473
• /
• 2008

In this study, we measure damage depth and calculate effective impact speed in case of rear-end collision using real car insurance data. We study the relationship between demage depth and effective impact speed, and present statistical model for these two variables. In our real data study, 3-degree polynomial equation model is better fit to effective impact speed and demage depth than the simple linear model that are estimated in previous other studies. Damage depth is a major factor to see the extent of impact in a car collision, and by using this equation, it is possible to evaluate the severity of driver's injury.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.682-687
• /
• 2000

In this research the remaining service life of the concrete due to the steel corrosion was predicted by three cases; causing carbonation, using sea sand, using deicing salts. In case of deterioration by carbonation, effective carbonation depth, effective coverage depth and relative humidity are considered for predicting method. In case of using sea sand, predicting method is made of rust growth equation from polarization resistance method. In case of using deicing salts, predicting method is made of transformation of Fick's law. Three methods are very useful in predicting service life of concrete.

• 한국표면공학회지
• /
• 제43권2호
• /
• pp.91-96
• /
• 2010

SCM440 steels were nitrided using pulsed dc plasma combined with inductively coupled plasma (ICP) generated by 13.56 MHz rf power in order to enhance case hardening depth. The case hardening depth was increased with rf power. The effective case-depth with ICP at 900 watt was as 1.6 times as that nitrided without ICP. The hardening depth was also increased up to 1.45 times. The compound layers formed on top surface were dense and thin when pulsed dc plasma was combined with ICP.

• 한국습지학회지
• /
• 제25권2호
• /
• pp.121-131
• /
• 2023

본 연구에서는 토심 대신 유효토심을 사용함에 따라 발생하는 강우-유출 해석과정의 문제를 VIC(Variable Infiltration Capacity) 모형을 가지고 살펴보았다. 이러한 연구목적을 달성하기 위해 모형의 매개변수를 다음과 같이 결정하였다. 먼저, 가용한 수치 정보를 이용하여 결정할 수 있는 매개변수는 고정하였다. 직접유출 및 기저유출 등에 관여하는 매개변수는 VIC 모형의 추천값을 적용하였다. 토심의 경우 (1) 유효토심을 적용하는 경우, (2) 토양층 연직 구조 특성을 반영하여 유효토심의 1.5배를 적용하는 경우 및 (3) 유효토심의 1.25배를 가정한 토심을 적용하는 경우, (4) 유효토심의 2.0배를 가정한 토심을 적용하는 경우 총 4가지를 고려하였다. 본 연구는 한강 유역의 충주댐 유역 및 소양강댐 유역을 대상으로 1983년에서 2020년까지의 기간에 대해 모의를 수행하였다. 연구 결과, 토심 대신 유효 토심을 적용하는 경우 직접유출과 기저유출에는 정반대의 영향을 미치며, 직접유출에는 3% 이상의 증가, 기저유출에는 동일 규모의 감소가 발생하는 것을 확인하였다. 추가로 충주댐과 소양강댐 유역의 유효토심 추정에 있어 가장 큰 영향을 미치는 것은 암석노출지의 비중으로 나타났으며, 그 영향으로 두 유역의 직접유출률과 기저유출률의 차이가 크게 다른 것으로 확인할 수 있었다.

• Journal of Welding and Joining
• /
• 제32권4호
• /
• pp.34-38
• /
• 2014

Carburizing treatments are the important way to developing fatigue strength and wear resistance. It is well known that the case depth is one of the most significant parameters determining fatigue strength. In this study, 3-point bending fatigue test was conducted to evaluate fatigue strength for the carburized depth with 18CrNiMo7-6 steel. As a result, fatigue strength increased with effective case depth decreased. It is shown that hardness in case hardened layer played principal role in the fatigue strength.

• 한국농공학회지
• /
• 제17권4호
• /
• pp.3991-4000
• /
• 1975

It is the aim of this study to investigate the influence of the factors in the sprayer nozzle for the travelling distance and to get nozzle design data in relation to the nozz1e with and without swirl plate. The factors of sprayer nozzle are composed of the spraying pressure, the helical angle of swirl plate, the helical groove depth of swirl plate, the distance of vortex chamber the slope of nozz1e cap, the curvature of nozzle cap and the hole diameter of nozz1e cap. The travelling distance and the size of sprayed particle are experimeted indoors by the factorial arrange-ment according to the 5 each level of the above factors. The results of this stupy are summarized as follows; 1. In the nozzle with swirl p1ate there were remarkable significance among factors each other, while without swirl plate were no significance. 2. The helical angle and groove depth in the nozzle with swirl plate were the highest effective factors. The effect of helical angle was very remarked in the quadratic curve with minium value. 3. The correlation betweenthe travelling distance and the sprayed particle size was no high and under 250 micron in the case with swirl plate, and there was higher correlation in the case without swirl plate. 4. The new ideal development of the swirl plate using of the most effective helical angle and groove depth will probably show the possiblities to make effective travelling distance over 8 meters and more over and to make average particle diameter under 300 micron.

• 한국응급구조학회지
• /
• 제16권3호
• /
• pp.103-115
• /
• 2012

Purpose : Inadequate chest compression during cardiopulmonary resuscitation(CPR) may result in the insufficient blood flow to preserve critical organ function. The study evaluated changes of quality of cardiopulmonary resuscitation over time in 30:2 CPR by laypersons and analyzed rescuer factors affecting the quality of chest compressions over time. Methods : This study was designed to know quality of CPR changes during 5 minutes. 47 students completed CPR training courses. They were performed 30:2 CPR using a manikin with Skill-Reporter for 5 minutes continuously to get data of depth, rate of chest compression, volume and correct rate of ventilation. Results : Time dependent analysis showed significant ineffective compression depth in females and under weight rescuers. In case of female, we found effective compression depth has maintained up to 2 minutes, but it decreased significantly after 2 minutes. However, underweight rescuers maintained effective compression depth up to a minute but it decreased after 1 minute. Conclusion : Although compression rate maintained over time, chest compression quality declined significantly. It suggested switching compression at an interval of 2 minutes is reasonable for 30:2 CPR by layperson but underweight rescuers may provide effective chest compression by switching shift every one minute.

• 핵의학기술
• /
• 제17권1호
• /
• pp.53-61
• /
• 2013

방사성 요오드 갑상선 섭취율은 거대갑상선 환자의 경우 그 체적에 의한 유효 갑상선 깊이가 깊어짐으로 인한 기하학적 변동이 있는 것이 사실이다. 본 연구는 방사성 요오드갑상선 섭취율에 있어 검출기와 선원 간 거리와 유효 갑상선 깊이에 따른 기하학적 요인의 영향을 고찰하고자 하였다. $^{131}I$ 370 kBq 선원을 검출기로부터 거리를 20 cm부터 30cm까지 1 cm 간격으로 변화시키며 Captus 3000 thyroid uptake system(Capintec, NJ, USA)으로 측정하였다. 유효갑상선 깊이를 재현하기 위해 목 팬텀을 이용하여 팬텀 내 선원의 깊이를 1 cm, 2 cm, 5 cm으로 변화시키며 같은 방법으로 측정하였다. 실험 결과, 곡선추정 회귀분석 결과 모든 실험군이 거듭제곱곡선에 높은 상관관계를 보이는 것으로 나타났다($$R2{\geq_-}0.915$$). 그러므로 검출기-선원 간 거리가 20 cm보다 30 cm에서 오차가 크게 감소됨을 예상할 수 있다. 모든 실험군에서 팬텀을 쓰지 않았을 때와 유효 갑상선깊이가 1 cm이 적용되었을 때의 계수율이 서로 유의할 만한 차이가 있는 것으로 나타났다(p<0.01). 선형회귀분석 결과 깊이에 따른 계수율의 변화는 모두 감소되는 것으로 나타났으나,$284.3keV{\pm}10%$ 영역에서 깊이에 따른 계수율의 변화는 증가되는 것으로 나타났다. 이 회귀식을 통해 환자의 예상 갑상선 섭취율을 산출해 보았을 때, $364.4keV{\pm}10%$에서 1 cm 당 -6.42%, $364.4keV{\pm}20%$의 영역에 서 -5.09%의 더 낮은 오차를 보였다. 또한 거리에 따른 계수율의 변동계수는 모든 실험군에서 선형으로 증가되는 것으로 나타났다. 그 중 $364.4keV{\pm}20%$, $364.4keV{\pm}10%$ 영역은 비교적 낮은 변동계수와 증가폭을 보였다. 곧, 유효 갑상선 깊이에 따른 오차를 줄이기 위해서는 $364.4keV{\pm}20%$의 영역의 사용이 더 적절할 것으로 보인다. 그러므로 갑상선 깊이에 따른 오차는 갑상선 깊이에 따른 보정계수 적용,$364.4keV{\pm}20%$ 에너지 영역 설정, 디텍터와 선원과의 거리를 연장하였을 때 감소시킬 수 있다고 생각된다.