• Steel and Composite Structures
• /
• 제12권4호
• /
• pp.353-379
• /
• 2012

The accuracy of the 30% and SRSS rules, commonly used to estimate the combined response of structures, and some related issues, are studied. For complex systems and earthquake loading, the principal components give the maximum seismic response. Both rules underestimate the axial load by about 10% and the COV of the underestimation is about 20%. Both rules overestimate the base shear by about 10%. The uncertainty in the estimation is much larger for axial load than for base shear, and, for axial load, it is much larger for inelastic than for elastic behavior. The effect of individual components may be highly correlated, not only for normal components, but also for totally uncorrelated components. The rules are not always inaccurate for large values of correlation coefficients of the individual effects, and small values of such coefficients are not always related to an accurate estimation of the response. Only for perfectly uncorrelated harmonic excitations and elastic analysis of SDOF systems, the individual effects of the components are uncorrelated and the rules accurately estimate the combined response. In the general case, the level of underestimation or overestimation depends on the degree of correlation of the components, the type of structural system, the response parameter, the location of the structural member and the level of structural deformation. The codes should be more specific regarding the application of these rules. If the percentage rule is used for MDOF systems and earthquake loading, at least a value of 45% should be used for the combination factor.

• 한국보건간호학회지
• /
• 제13권2호
• /
• pp.12-25
• /
• 1999

This study examines individual determinants of hospital days in community-dwelling elders by estimating a linear structural equation model based upon Andersen's behavioral model. Data were collected through a national survey of elders in Korea in 1994. The subjects for this secondary data analysis were 1687 non-institutionalized elders aged 60 years or older. Except for the effect of age and gender on family help. the predisposing components had direct effects on the enabling components. Of the effects of the enabling components. family help had a direct effect on self-evaluated health; economic status had a direct effect on chronic disease and self-evaluated health; and access had a direct effect on chronic disease. functional health status and self-evaluated health. Of the enabling components. residence and family help directly affected hospital days. Self-evaluated health revealed the greatest direct effect on hospital days followed by functional health. Overall. the effects of the predisposing components and the enabling components on hospital days were not prominent. Since the model explained only $4\%$ of the variance in hospital days. the magnitude of the effect of the need components cannot be judged in terms of equity of distribution of health services. In particular. the effect of family help in the model reveals the importance of family support in health management of elders. The implications of these analyses for improving the proposed model of hospital days were discussed.

• Earthquakes and Structures
• /
• 제10권1호
• /
• pp.211-238
• /
• 2016

The Maximum seismic responses of steel buildings with perimeter moment resisting frames (MRF), modeled as complex MDOF systems, are estimated for several incidence angles of the horizontal components and the critical one is identified. The accuracy of the existing rules to combine the effects of the individual components is also studied. Two and three components are considered. The critical response does not occur for principal components and the corresponding incidence angle varies from one earthquake to another. The critical response can be estimated as 1.40 and 1.10 times that of the principal components, for axial load and interstory shears, respectively. The rules underestimate the axial load but reasonably overestimate the shears. The rules are not always inaccurate in the estimation of the combined response for correlated components. On the other hand, totally uncorrelated (principal) components are not always related to an accurate estimation. The correlation of the individual effects (${\rho}$) may be significant, even for principal components. The rules are not always associated to an inaccurate estimation for large values of ${\rho}$, and small values of ${\rho}$ are not always related to an accurate estimation. Only for perfectly uncorrelated harmonic excitations and elastic analysis of SDOF systems, the individual effects of the components are uncorrelated and the rules accurately estimate the combined response. The degree of correlation of the components, the type of structural system, the response parameter under consideration, the location of the structural member and the level of structural deformation must be considered while estimating the level of underestimation or overestimation.

• Bulletin of the Korean Chemical Society
• /
• 제35권4호
• /
• pp.1057-1060
• /
• 2014

In our previous articles, an approach has been proposed for the evaluation of the uncertainty of overall result from multiple measurements. In the approach, uncertainty sources were classified into two groups: the first including those giving same 'systematic' effect on each individual measurement and the second including the others giving 'random' effect on each individual measurement and causing a variation among individual measurement results. The arithmetic mean of the replicated measurements is usually assigned as the value for the overall result. Uncertainty of the overall result is determined by separately evaluating and combining an overall uncertainty from sources of the 'systematic' effect and another overall uncertainty from sources of the 'random' effect. This conceptual approach has been widely adopted in chemical metrology society. In this study, further logical proof with more detailed mathematical expressions is provided on the approach.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권2호
• /
• pp.339-352
• /
• 2021

This study aims to explore the relationship between entrepreneurial role models (ERM) and entrepreneurship education (EE) on individual entrepreneurial orientation (EO) and its consequences for entrepreneurial intention (EI). Data is obtained through a survey method on 255 management and business university students who had completed the entrepreneurship education program. To evaluate the research model, the data is processed using PLS-SEM. The results of this study indicate that the existence of entrepreneurial role models and entrepreneurial education programs for students affects the components of individual entrepreneurial orientation, namely individual innovativeness, individual proactiveness, and individual risk-taker. However, ERMs do not have a direct effect on EI. The main finding of this research appears on the influence of individual EO on EI, which indicates that only individual innovativeness impacts entrepreneurial intention. Meanwhile, personal proactiveness and risk-takers are proven to have no impact on EI. This study succeeded in filling the research gap, namely, examining the influence of ERMs on each of the components forming an individual entrepreneurial orientation (IEO) and its EI. This research model also provides a comprehensive research model on the influence of pre-entrepreneurial exposure on IEO and its consequences on EI.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
• /
• pp.230-233
• /
• 2004

This paper is proposed that The voltage-dependant power factor model is established as 5th polynomials with convenience data type. This modeling includes the harmonic components by static experiments of individual and composite load. This paper suggested methodology for modeling bus and regional power factor with consideration of harmonics effect by load composition rates and individual load power factor models.

• 한국주거학회논문집
• /
• 제17권2호
• /
• pp.11-18
• /
• 2006

For the more comfortable thermal environment in residential buildings, it was necessary for variable components like as automatic flow limiting valves and/or balancing valves in hydronic system. And, these components had an effect on flow-rate and pressure inside pipe. In this case, the incompatibility between the design for the heating system and the selection of equipment was the causes of several problems in heating pipe network. In this study, we peformed measurements and analyses of flow rate and pressure inside pipe for radiant floor heating in residential buildings through field surveys and experiments in order to find out the actual conditions and problems. On the basis of this, we suggested the approach for the optimal flow-rate and pressure maintaining inside pipe in individual heating system.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권2호
• /
• pp.170-175
• /
• 2016

The objective of this study was to assess variance components and genetic parameters for fat and protein content in Tsigai sheep using multivariate animal models in which fat and protein content in individual months of lactation were treated as different traits, and univariate models in which fat and protein content were treated as repeated measures of the same traits. Test day measurements were taken between the second and the seventh month of lactation. The fixed effects were lactation number, litter size and days in milk. The random effects were animal genetic effect and permanent environmental effect of ewe. The effect of flock-year-month of test day measurement was fitted either as a fixed (FYM) or random (fym) effect. Heritabilities for fat content were estimated between 0.06 and 0.17 (FYM fitted) and between 0.06 and 0.11 (fym fitted). Heritabilities for protein content were estimated between 0.15 and 0.23 (FYM fitted) and between 0.10 and 0.18 (fym fitted). For fat content, variance ratios of permanent environmental effect of ewe were estimated between 0.04 and 0.11 (FYM fitted) and between 0.02 and 0.06 (fym fitted). For protein content, variance ratios of permanent environmental effect of ewe were estimated between 0.13 and 0.20 (FYM fitted) and between 0.08 and 0.12 (fym fitted). The proportion of phenotypic variance explained by fym effect ranged from 0.39 to 0.43 for fat content and from 0.25 to 0.36 for protein content. Genetic correlations between individual months of lactation ranged from 0.74 to 0.99 (fat content) and from 0.64 to 0.99 (protein content). Fat content heritabilities estimated with univariate animal models roughly corresponded with heritability estimates from multivariate models: 0.13 (FYM fitted) and 0.07 (fym fitted). Protein content heritabilities estimated with univariate animal models also corresponded with heritability estimates from multivariate models: 0.18 (FYM fitted) and 0.13 (fym fitted).

• 한국정밀공학회지
• /
• 제2권3호
• /
• pp.28-40
• /
• 1985

In this study, to check up on the effect of the components of cutting resistance upon friction between drill and inside wall of hole in drilling, the experiment was performed with individual specimen of carbon steel, cast iron, aluminium alloy under various cutting conditions: depth of hole, cutting speed, feed rate, shape and material of specimen. On the basis of the experimental results, the following conclusions are drawn; 1. The components of cutting resis- tance were increased in proportion to the increase of depth of hole owing to frictional resistance of drill margin and chip-jamming. 2. As feed rates increase, torque and thrust were increased. When comparing to the increasing rate for these components respecitively, thrust is higher tendency than torque. 3. As drill diameter increase, torque and thrust were increased. When comparing to the increasing rate for these components respectively, torque is higher tendency than thrust. 4. In the case of torque, the frictional resistance between drill margin and inside wall of drilled hole accounts for about 20 percent of carbon steel, 14 of cast iron, 10 aluminium alloy in drilling. But the effect of thrust force could be negligible. 5. Comparison between the theoretical and experimental results showed a close agreement so far as depth of hole is about three times of drill diameter. But there was a wide difference between them beyond the rane of three times, because of characteristics of the drilling process.

• 한국조리학회지
• /
• 제4권
• /
• pp.369-387
• /
• 1998

The atmosphere of foodservice facility is considered to be the total environment to which customers are exposed. Atmosphere is sometimes described as everything that makes an impression on people. On the other hand, mood is best described as the response of an individual to the various components that make up the atmosphere. Most people experience some type of reaction to the atmosphere that may be desirable or undesirable. If the individual response to the foofservice facility is favorable, the atmosphere has served to put that person into a good mood. In the highly competitive commercial restaurant field, the planning of the atmosphere for new facilities is going to be more important. The coming generation of potential customers is growing up in an environment that associates dining out with more than just good food. This study is characterized by the right atmosphere offerings. Thus, this study discusses the physical components affecting perception of atmosphere. Many of these components will be discussed in detail to show their relationship to the design of dining areas. This study identified the many physical components of atmosphere that can be manipulated and arrive at a combination that will give the desired sensations. With these backgrounds as a guide, this study presented alternatives which should not only provide atmosphere but should reach a satisfactory level of creating atmosphere from a practical standpoint. these is to maximise the perceptual effect, train the employees, and be reflected and be reflected the advertising and public relations.