• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.515-520
• /
• 2006

Yano method had been used in predicting the settlement of self-weight consolidation of dredged soil in the construction of reclamating the dredged soil. Its estimation was found to show some different results from field measurements. The numerical analysis with PSDDF was peformed find such differences, considering the effect of desiccation on the consolidation during the remaining time after reclamation. For the parametric study, numerical analyses with/without consideration of desiccation were carried out with changing the conditions of desiccation such as the number of placing the fill and the time period between each placement. As results of analysis, estimations about consolidation settlement and distribution of water contents with consideration of desiccation was in good agreements with field measurements. It was also found that the number of placing the fill and the time period between each placement did not affect the behavior of self-weight consolidation as much as the effect of desiccation.

• 산업기술연구
• /
• 제20권A호
• /
• pp.93-100
• /
• 2000

This research is to investigate the self-weight consolidation settlement and desiccation shrinkage settlement of soft marine dredging clay by performing numerical and experimental works. Large column test were carried out investigate the consolidation settlement considering effect of the self-weight and desiccation shrinkage, and centrifuge model test was also carried out investigate self-weight consolidation settlement. Results of centrifuge model and large column experiments about changes of settlement with time were analyzed by using the numerical technique of explicit finite difference method considering effect of the self-weight and desiccation based on the finite strain consolidation theory. Centrifuge model test results were in relatively good agreements with analyzed results in terms of self-weight consolidation settlement with time. Large column test results showed quite different values from the numerically estimated one, carried by experimental conditions.

• Corrosion Science and Technology
• /
• 제15권4호
• /
• pp.166-170
• /
• 2016

The combined process of porous type anodizing and desiccation treatment was applied to improve wettability of A1050 aluminum alloy. The water contact angles of anodized samples were increaseds considerably with desiccation treatment. However, there was no considerable effect of polishing and anodizing time on water contact angle. The corrosion behavior with the treatments was investigated electrochemically. The corrosion resistance of the samples in 3.5 mass% NaCl solutions increased with higher contact angle. Anodized and desiccated samples showed better corrosion resistance than un-desiccated samples around rest potential region.

• 산업기술연구
• /
• 제20권A호
• /
• pp.101-111
• /
• 2000

This research is results of experimental and numerical works on characteristic of strength increase and bearing capacity in dredged and reclaimed soil due to desiccation shrinkage. For a soil sampled from southern coastal area in Korea, basic soil property tests and standard consolidation test with falling head permeability tests were carried out to obtain consolidational characteristics of soil. Double cone penetration test, laboratory vane test and unconfined compression test were also performed to investigate the change of shear strength with degree of desiccation. Model tests were performed in 1G environment and 30G level artificially accelerated condition by using the centrifuge model test facilities to investigate the bearing capacity of desiccated ground. Test results were analyzed by using the theoretical and load-settlement characteristics method proposed by Meyehof & Hanna(1978). On the other hands, the numerical technique, using the finite strain consolidation theory considering the effect of desiccation was used to estimate the appropriate time of using heavy construction equipments in field with respect to strength increase due to desiccation.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2020년도 춘계학술대회
• /
• pp.15-15
• /
• 2020

• 생물환경조절학회지
• /
• 제15권1호
• /
• pp.100-106
• /
• 2006

A hypertonic solution of sorbitol was used to precondition Douglas-fir and Western hemlock plug seedlings to improve desiccation resistance. Seedlings were preconditioned by soaking their root balls in water, -0.75 or -1.50 MPa sorbitol solution for 22 hr, and then exposed to desiccation conditions for 8 days. During the desiccation period, a transpirational water loss was significantly reduced by the sorbitol preconditioning, with its effect positively depending on concentration. This preconditioning-induced reduction in water loss was mainly caused by the decline in needle stomatal conductance. Sorbitol-induced stomatal control was more closely associated with reduction in plant water potential, rather than increase in abscisic acid concentrations. After rehydration of stressed-plants, most of the preconditioned seedlings with sorbitol were survived, while only 35% of Douglas-fir and 28% of Western hemlock seedlings treated with water were alive. The post-growth was significantly greater in the preconditioned seedlings than only water-treated seedlings. These results suggested that the earlier stomatal control with sorbitol-facilitated preconditioning could play a role in improving desiccation resistance of evergreen woody plants at transplanting in the field where water supply is limited or dry conditions are prevailing.

• Fisheries and Aquatic Sciences
• /
• 제4권4호
• /
• pp.257-260
• /
• 2001

The effects of light, desiccation and salinity on the discharge of spores in Korean agarophyte, Gracilaria verrucosa were studied. Among the examined factors, light after darkness was the most effective for spore discharge. The maximum release of tetraspores was induced at 24 h after the treatment. Desiccation also seems to be conductive to the release of tetraspores. However, its effect, as in treatment of distilled water for salinity, was hardly found in induction of carpospore discharge. This may suggest that spore discharge in this alga is primarily related with photoperiodic rhythm. Also it appears that the amount of light energy received by fertile thalli also significantly affects to the spore release, considering relationship between the amount of the discharged spores and the elapsed time after treatment.

• 농업과학연구
• /
• 제48권4호
• /
• pp.753-760
• /
• 2021

This study was carried out to discover suitable packaging methods during the cold or frozen storage of sawtooth oak and Japanese larch seedlings, which are major afforestation tree species in Korea. The weight loss rate of sawtooth oak was lower under frozen storage at -2℃ (maximum, 33.7%) than under cold storage at 2℃ (maximum, 61.0%). A film liner treatment inside the packaging box effectively suppressed the increase in the weight loss rate. For the sawtooth oak containerized seedlings, when stored at -2℃, the rate of weight loss was 17.9 to 25.4% in the untreated group and less than 1% in the film liner treatment group. Similar results were observed with Japanese larch. After two months of freezing at -2℃, both species maintained a low index of 1.0 - 1.1 with regard to the degree of shoot desiccation of containerized seedlings, and there was no significant difference between the treatments. On the other hand, the chlorine dioxide treatment could more effectively reduce the occurrence of mold and shoot desiccation than a PE single treatment in bare-root seedlings. According to these results, it was concluded that frozen storage is generally suitable as a means of long-term storage compared to cold storage of sawtooth oak and Japanese larch. A chlorine dioxide treatment at 20 ppm was effective for maintaining seedling quality levels during storage, demonstrating the good effect of suppressing the occurrence of shoot desiccation and the occurrence of mold.

• 생명과학회지
• /
• 제12권6호
• /
• pp.694-699
• /
• 2002

본 연구는 파종전 종자처리에 의해 박 종자의 발아율을 최대한 향상시킬 수 있는 방법을 강구하고자 종피연화, 세척, 저온 및 건조 중 적색광 처리가 발아에 미치는 영향을 조사하였으며 그 결과를 요약하면 다음과 같다. 1) 종피연화는 염기성인 KOH 또는 NaOH로 처리하는 것보다 산성인 acetone과 acetonitrile 10% 용액에 1시간 처리하였을 때 발아율이 증가되고 발아가 촉진되는 것으로 나타났다. 2) Acetone으로 종피연화 시킨 종자는 이후에 행하여지는 저온처리의 영향을 적게 받는 반면, KOH로 종피연화 시킨 종자는 저온처리가 행해지지 않을 경우 발아가 현저히 억제되었다. 3) 종피연화 후 흐르는 수돗물로 1시간 세척시킨 종자의 발아율은 세척하지 않은 것보다 높았다. 4) 종피연화, 세척 및 저온처리를 경과가 이루어진 종자는 건조과정에서 암처리보다는 적색광을 처리하였을 경우 발아율이 높았다.

• 콘크리트학회논문집
• /
• 제23권4호
• /
• pp.441-448
• /
• 2011

이 연구에서는 실리카퓸 및 수축 저감제, 팽창재, 고성능 감수제의 혼입을 변수로 한 초고성능 시멘트 복합체(UHPCC)의 초기 수축 거동을 평가하기 위하여 화학수축 및 자기수축 실험을 수행하고, 응결 측정 결과와 비교하여 UHPCC의 자기건조 시작 시점에 대하여 분석하였다. 실험 결과, 실리카퓸 및 수축 저감제는 초기 화학수축을 증가시키는 경향을 보였으며, 고성능 감수제는 시멘트와 배합수의 수화 반응을 지연시키고 화학수축을 저감시키는 것으로 나타났다. 수축 저감제와 팽창재를 조합하여 적용한 경우 약 49%의 자기수축 저감 효과를 보였으며, 팽창재는 경화를 촉진 시키는 것으로 나타났다. 또한 UHPCC는 다수의 섬유 혼입과 낮은 물-결합재비에 의해 초결 이전부터 자기건조 현상이 발생하는 것으로 나타났다.