• Journal of Biosystems Engineering
• /
• v.24 no.5
• /
• pp.431-438
• /
• 1999

The environmental control based on interactive thermoregulatory behavior for swine production has many advantages over the conventional temperature-based control methods. Therefore, this study was conducted to compare various feature selection methods using postural images of growing pigs under various environmental conditions. A color CCD camera was used to capture the behavioral images which were then modified to binary images. The binary images were processed by thresholding, edge detection, and thinning techniques to separate the pigs from their background. Following feature were used for the input patterns to the neural network ; \circled1 perimeter, \circled2 area, \circled3 Fourier coefficients (5$\times$5), \circled4 combination of (\circled1 ＋ \circled2), \circled5 combination of (\circled1 ＋ \circled3), \circled6 combination of (\circled2 ＋ \circled3), and \circled7 combination of (\circled1 ＋ \circled2 ＋ \circled3). Using the above each input pattern, the neural network could classify training images with the success rates of 96%, 96%, 96%, 100%, 100%, 96%, 100%, and testing images with those of 88%, 86%, 93%, 96%, 91%, 90%, 98%, respectively. Thus, the combination of perimeter, area and Fourier coefficients of the thinning images as neural network features gave the best performance (98%) in the behavioral classification.

• Korea-Australia Rheology Journal
• /
• v.12 no.2
• /
• pp.107-117
• /
• 2000

Prediction of the product shape in sheet casting process is performed from the numerical simulation. A three-dimensional finite element method is used to investigate the flow behavior and to examine the effects of processing conditions on the sheet produced. Effects of inertia, gravity, surface tension and non-Newtonian viscosity on the thickness profile of the sheet are considered since the edge bead and the flow patterns in the chill roll region have great influence on the quality of the products. In the numerical simulation with free surface flows, the spine method is adopted to update the free surface, and the force-free boundary condition is imposed along the take-up plane to avoid severe singularity problems existing at the take-up plane. From the numerical results of steady isothermal flows of a generalized Newtonian fluid, it is shown that the draw ratio plays a major role in predicting the shape of the final sheet produced and the surface tension has considerable effect on the bead thickness ratio and the bead width fraction, while shear-thinning and/or tension-thickening viscosity affect the degree of neck-in.

• Journal of the Mineralogical Society of Korea
• /
• v.10 no.2
• /
• pp.82-96
• /
• 1997

Buserties are known to have layer structures with variable C dimension which depended on the nature interlayer catious and contents of water molecular between edge-sharing [MnO6] octabedral layers. Na-, Ca-, Mg-, and Zn-buserties were synthesized in the laboratory and studied for to know the structural states of water molecules and the role of catious in the buserite structures. With lowering the relative humidity(RH), Ca-buserite begins to dehydrate at 27% RH and proceeds further very slowly. Mg- and Zn- buserite also slow dehydration above 2% RH. With gradual ineveasing temperature Ca- and Zn-buserite show abrupt shifting of 10$\AA$ peak (10$\AA$-phare) toward 7$\AA$ peak. All of 7$\AA$-phare are further dehydrated to 5$\AA$-phare by further increasing temperature. It suggests that interlayer catious play a crucial role in the dehydration behavious of buserites. Simulation of one-dimensional X-ray diffraction patterns of buserties show that buserites have three layers of water molecules of different types: the very loosely bound and tightly bend waters, instead of two layers that was regarded by previous authers. The very loosely bound water is sited I open space of the interlayer, the loosely bound water is bound on the tightly bound water by hydrogen bond, and the tightly bond water in coodinately bound on the interlayer catious.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.2
• /
• pp.161-167
• /
• 1983

In this study the phenomenon of cutting stress which arises on cutting tools and work pieces in cutting process is investigated by rake angle of cutting tools and feed for this measurement, P$_{s}$-1 (high modulus, photolastic Inc.) was used as a cutting tool, P$_{s}$-3 (medium modulus, photolastic Inc.) was used as work piece and reduction apparatus was attached to the head stock, and orthogonal cutting was adapted as a cutting method and transparent glass was used to block the strain in the orientation of thickness. The followings are the results of this study. (1) Photoelastic experimental equipments have made it possible to make dynamic measurement and analyze stress distribution in cutting tool and work piece surface which has hitherto been conducted only in static measurement and analyzing method. (2) The maximum stress arising at tools and work pieces in cutting process is on the tool edge tip, and the maximum stress arising on the tip of cutting tools is equal to that on the contacting area of work pieces in values. (3) The distributions of maximum shear stress on certain parts of the cutting tools and work pieces are as follows; for cutting tools, .alpha.=12.deg., .alpha.=0.deg., .alpha.=-12.deg. in order, and for work pieces, .alpha.=-12.deg., .alpha.=0.deg., .alpha.=12.deg. in opposite order.der.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.701-711
• /
• 1994

In this paper, we design wavelet matched filters using Wavelet Transform available in the field of time-frequency analysis, for the optical patter recognition, and study optical correlation properites according to variations of the dilation factor of wavelet functions, which were compared with conventional matched filter and POF. We have found that the wavelet matched filters depend upon the shapes if used input patterns and dilation factors of the wavelet function in order to have the best dicriminability. Also, we show the edge enhanced effects of 2-D image, which is one of the properities of the wavelet transform. If has been found that the wavelet matched filter can discriminate better than the conventional matched filter and POF owing to their bandpass properties, and found that the proposed wavelet matched filters have more sensitive correlation response than POF.

• Journal of Information Display
• /
• v.12 no.4
• /
• pp.167-171
• /
• 2011

The angular distribution of the luminance on each optical component of 40-inch light-emitting diode backlight was measured and studied, using the optical-simulation method. Several scattering functions were investigated as the reflection distribution function of the scattering dots printed on the bottom surface of the light guide plate (LGP). It was found that both the diffuse Lambertian and near-specular Gaussian scattering functions were necessary for the successful reproduction of the experimental angular distribution of the luminance. The optimization of the scattering parameters included in these scattering functions led to almost the same luminance distribution as that obtained from the experiment. This approach may be an effective way of indirectly estimating the reflection distribution function of the scattering dots of the LGP, which cannot be made accessible through any other experimental method.

• Convergence Security Journal
• /
• v.14 no.7
• /
• pp.23-28
• /
• 2014

This study proposes the design and implementation of the system for a facial expression recognition system. LDP(Local Directional Pattern) feature computes the edge response in a different direction from a pixel with the relationship of neighbor pixels. It is necessary to be estimated that LDP code can represent facial features correctly under various conditions. In this respect, we build the system of facial expression recognition to test LDP performance quickly and the proposed evaluation system consists of six components. we experiment the recognition rate with local micro patterns (LDP, Gabor, LBP) in the proposed evaluation system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.12
• /
• pp.776-781
• /
• 2017

In this study, we investigated the effect of electrode pattern design on the thermal shock resistance and temperature uniformity of a ceramic heater. A cordierite substrate with a low thermal expansion coefficient was fabricated by tape casting, and a tungsten electrode was printed and used as a heating element. The temperature distribution of the ceramic heater was calculated by a finite-element method (FEM) by considering various electrode patterns, and the tensile stress distribution due to the thermal stress was calculated. In the electrode pattern with a single-line width, the central part of the ceramic heater was heated to the maximum temperature, and the position of the ceramic heater having a double-line width was changed to the maximum temperature, depending on the position of the minimum line width pattern. The highest tensile stress was found along the edges of the ceramic heater. The temperature gradient at the edge determined the tensile stress intensity. The smallest tensile stress was observed for electrode pattern D, which was expected to be advantageous in resisting thermal shock failures in ceramic heaters.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.5
• /
• pp.23-31
• /
• 1989

The electromagnetic diffraction problem for the incidence of E-polarized planewave on both interfaces of an arbitrary-angled dielectrc wedge is solved in conjunction with the edge condition near the tip of dielectric wedge in the static limit. The diffraction coefficients obtained by the tip of the wedge, the diffraction coefficients presented in this paper approach more closely to the exact pattem of a perfectly conducting wedge as the relative dielectric constants of the dielectric wedge increase.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.125-130
• /
• 2008

The present study numerically simulates the flow and heat transfer characteristics of rib-induced secondary flow in a cooling channel with staggered V-shaped ribs, extruded on both walls. The rib pitch-to-height ratio (p/h) varies from 2.8 to 10 with the rib-height-to-hydraulic diameter ration ($h/D_h$) of 0.07 and the Reynolds number of 50,000. Shear stress transport (SST) turbulence model is used as a turbulence model. Computational results show that complex secondary flow patterns are generated in the duct due to the snaking flow in the streamwise direction for all tested cases. In the range of p/h=5 to 10 the staggered V-shaped rib gives about 3 times higher heat transfer augmentation than the reference smooth channel with high heat transfer on both front side and the area around the leading edge of the ribs, while the former cases give about 2.5 times higher streamwise pressure drop than the latter ones. Consequently, for the thermal performances, based on the equal pumping power condition, the staggered ones give about 2 times higher values than the latter ones with more uniform heat transfer distribution.