• Journal of the Korean Wood Science and Technology
• /
• 제17권4호
• /
• pp.70-76
• /
• 1989

The fracture toughness of two species, Pinus rigida MILL and Pinus koraiensis S. et Z. grown in Korea, was investigated by means of single edge notch beam specimen for the six principal systems of crack propagation in wood. The values of the fracture toughness for the LR and the LT systems ($K_{IC}$LR and $K_{IC}$LT) were found to be similar to each other and about 8 times greater than those for the other systems ($K_{IC}$RL, $K_{IC}$TL and $K_{IC}$TR) in both species. The results indicate that the characteristics of fracture toughness in three principal directions of wood (L, R, T direction) are quite different from those of bending strength for the responsible direction. To predict $K_{IC}$ value based on the variation of specific gravity, the experimental values of $K_{IC}$LT and $K_{IC}$TL were compared to the predicted values by published relationship between $K_{IC}$ and specific gravity. However, there were 10 to 25% differences between the former and the latter.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.321-324
• /
• 2005

This paper presents a preliminary study on the influence of material ductility on diagonal tension behavior of shear-wall panels. There have been a number of previous studies, which suggest that the use of high ductile material such as ECC (Engineered Cementitious Composite) significantly enhanced shear capacity of structural elements even without shear reinforcements involved. The present study emphasizes increased shear capacity of shear-wall panels by employing a unique strain-hardening ECC reinforced with poly(vinyl alcohol) (PVA) short random fibers. Normal concrete was adopted as the reference material. Experimental investigation was performed to assess the failure mode of shear-wall panels subjected to knife-edge loading. The results from experiments show that ECC panels exhibit a more ductile failure mode and higher shear capacity when compared to ordinary concrete panels. The superior ductility of ECC was clearly reflected by micro-crack development, suppressing the localized drastic fracture typically observed in concrete specimen. This enhanced structural performance indicates that the application of ECC for a in-filled frame panel can be effective in enhancing seismic resistance of an existing frame in service.

• 한국구조물진단유지관리공학회 논문집
• /
• 제2권2호
• /
• pp.209-217
• /
• 1998

Compared to normal-strength concrete, high-strength concrete has the lower lateral expansion capacity caused by the higher elastic modulus and the lower internal crack characteristic. Therefore, the effect of the lateral confining action of hoops appears slowly. Nevertheless, it has been reported that the strength and deformation capacity of high-strength concrete is improved by well-distributed hoops. Due to that argument, this investigation has been compared and analyzed by the experimental works on the deformation capacity and the confinement mechanism of high-strength concrete shear wall of the high-rise building reinforced by rectangular steel tubes and rectangular hoops at both edges. It is suggested that, using high-strength concrete($500kgf/cm^2$, $700kgf/cm^2$), hoops should be replaced with rectangular steel tubes in order to prevent closely spaced hoops at the edge of the shear wall.

• Restorative Dentistry and Endodontics
• /
• 제17권1호
• /
• pp.153-165
• /
• 1992

Dental composite resin is a kind of the particle - reinforced composite material, and is widely used in recent dental restoration of anterior and posterior tooth region. The purpose of this study was to investigate the fracture behaviour according to volume fractions and external findings of the filler particles for better interpretation of the fracture characteristics of posterior dental composite resins by analytic method of fracture mechanics. The plane strain fracture toughness($K_{IC}$) and Acoustic Emission were determined with three - point bending test using the single edge notch specimen according to the ASTM - E399, and its analyzed data was compared with filler volume fractions derived from the standard ashing test and scanning electron fractographs of each specimen including the unfilled experimental resin as a control. The results were that the value of fracture toughness of the composite resin material was in the range from 0.85 MPa$\sqrt{m}$ to 1.60 MPa$\sqrt{m}$ and was higher than the value of the unfilled experimental resin, and the fracture behaviours dervied from Acoustic Emission analysis show prominent differences according to the volume fraction and the size of filler particles used in each composite resin. The degree of resistance against crack propagation seems to be increase and the fractographs demonstrate the high degree of surface roughness and irregularity according with the increase of fracture toughness value.

• International Journal of Precision Engineering and Manufacturing-Green Technology
• /
• 제5권5호
• /
• pp.651-658
• /
• 2018

We comprehensively investigated the wrinkles of a stiff layer covering a spherical void embedded in a rubber matrix after the void experienced inflation or contraction. We developed an easy experimental way to realize the inflation and contraction of the voids. The inflation took place in a void right beneath the surface of the matrix and the contraction happened in a void at the bottom of the rubber matrix. In the inflation, the wrinkle at the center of the deformation was random, and the pattern propagated into rabyrinthine, herringbone, and then oriented parallel lines as the position was away from the center of the inflation to the edge. The cracks were concentric, which were perpendicular to the parallel wrinkled pattern. In the contraction, the wrinkle was simply concentric around the surface of the void without any crack. The cracks were found only near the center of the deformation. The strain distribution in the stiff layer after the inflation and contraction was theoretically analyzed with simulations that were in excellent agreement with the experimental results.

• Steel and Composite Structures
• /
• 제39권4호
• /
• pp.453-469
• /
• 2021

The cracking at the transverse diaphragm cutout is one of the most severe fatigue failures threatening orthotropic steel decks (OSDs), whose mechanisms and crack treatment techniques have not been fully studied. In this paper, full-scale experiments were first performed to investigate the fatigue performance of polished cutouts involving the effect of an artificial geometrical defect. Following this, comparative experimental testing for defective cutouts strengthened with carbon fiber-reinforced polymer (CFRP) was carried out. Numerical finite element analysis was also performed to verify and explain the experimental observations. Results show that the combinative effect of the wheel load and thermal residual stress constitutes the external driving force for the fatigue cracking of the cutout. Initial geometrical defects are confirmed as a critical factor affecting the fatigue cracking. The principal stress 6 mm away from the free edge of the cutout can be adopted as the nominal stress of the cutout during fatigue evaluation, and the fatigue resistance of polished cutouts is higher than Grade A in AASHTO specification. The bonded CFRP system is highly effective in extending the fatigue life of the defective cutouts. The present study provides some new insights into the fatigue evaluation and repair of OSDs.

• Structural Engineering and Mechanics
• /
• 제82권1호
• /
• pp.17-30
• /
• 2022

The use of composite patches for the reduction of stresses at the level of the damaged zone in aeronautical structures has experienced rapid expansion given its advantages over conventional mechanical processes (riveting, bolting, etc.). Initially, The research axes in this field were aimed at choosing suitable mechanical properties for the composite and the adhesive, then to optimize the shape of the composite patch in order to ensure good load transfer and avoid having a debonding at the level of the edges essentially for the case of a repair by single side where the bending moment is present due to the non-symmetry of the structure. Our work falls within this context; the objective is to analyze by the finite element method the fracture behavior of a damaged plate repaired by composite patch. Stress reduction at the edge is accomplished by creating a variable angle chamfer on the composite patch. The effects of the crack length, the laminate sequence and the nature of the patch as well as the use of a hybrid patch were investigated. The results show clearly that a beveled patch reduces the stress concentrations in the damaged area and even at its edges. The hybrid patch also ensures good durability of the repair by optimizing its stacking sequence and the location of the different layers according to the fibers orientations.

• 대한기계학회논문집A
• /
• 제39권4호
• /
• pp.405-413
• /
• 2015

최근 미국에서는 가동기간이 오래된 원전 매설배관에서 부식 및 침식에 의해 삼중수소 누설로 지하수가 오염되는 사례가 급증하고 있다. 따라서, 현재 원전 안전등급 매설배관으로 사용되고 있는 금속재료의 배관을 대신해서 부식 및 침식 등의 열화 손상에 대한 저항성이 우수한 고밀도 폴리에틸렌(HDPE) 배관을 ASME Code Class 3 안전계통 배관으로 사용하기 위한 연구가 수행되고 있다. 본 연구에서는 발전소 가동 중 매설배관에 가해질 수 있는 하중과 온도 범위를 바탕으로 HDPE 배관 융착부에 대한 인장 시험과 저속균열성장 (SCG) 시험을 수행하였다. 시험 결과로 얻은 SCG 시험편의 파단면을 분석하여 HDPE 재료의 파손 기구를 파악하였다. 이를 바탕으로 3D 유한요소 해석을 이용하여 균열이 있는 HDPE 재료가 버틸 수 있는 한계하중에 대한 검증을 수행하였다.

• 대한치과보철학회지
• /
• 제37권4호
• /
• pp.454-464
• /
• 1999

The metal ceramic crown is currently the most popular complete veneer restoration in dentistry, but in many cases, the metal cervical collar at the facial margin is unesthetic and unacceptable. Facial porcelain margin has been used in place of it. But this dose not solve the problems, such as dark gingival discoloration and cervical opaque reflection of porcelain veneer. Recently, metal copings which were designed to terminate its labio-cervical end on the axial walls coronal to the shoulder have been clinically used to solve the esthetic problem of metal ceramic crown. But in this design, porcelain veneer of labio-cervical area which is not supported by metal may not be able to resist the stress during cementation and mastication. The purpose of this study was to evaluate fracture strength and fractured appearance of crowns according to different coping designs. A resin maxillary left central incisor analogue was prepared for a metal ceramic crown, and metal dies were made with duplication mold. Metal copings were made and assigned to one of four groups based on facial framework designs: group 1, coping with 0.5mm metal collar; group 2, metal extended to the shoulder; group 3, metal extended to 1mm coronal tn the shoulder: group 4, metal extended to 2mm coronal to the shoulder. Copings and crowns were adjusted to be same size and thickness, and cemented to metal dies with zinc phosphate cement by finger pressure. Fracture strength was measured with Instron Universal Testing Machine. Metal dies were anchored in Three-way-vice at 3mm below finish line and at $130^{\circ}$ inclined to the long axis of the crown. Load was directed lingually at 2mm below midincisal edge. Load value at initial crack and at catastrophic fracture was recorded. The results obtained were as follows : 1. Fracture strength values at initial crack were higher in groups 1, 2 than in groups 3, 4 but this difference was not statistically significant(P<0.05). 2. Conventional metal collared crown had greater catastrophic fracture strength than any other collarless crowns. 3. The greater the labial metal coping reduction, the lower the catastrophic fracture strength of crowns but when more than 1mm of labial metal reduction was done, the difference in strengths was not statistically significant(p<0.05). 4. The strongest collarless coping design was group 2.

• 한국결정성장학회지
• /
• 제28권3호
• /
• pp.135-139
• /
• 2018

본 연구에서는 HVPE 성장법을 이용하여 사파이어 기판 위에 알파 갈륨옥사이드를 성장시키며 VI/III 비의 변화에 따른 효과를 확인하였다. 성장된 알파 갈륨옥사이드의 표면은 평평하고 crack 없이 성장되었다. 성장된 갈륨옥사이드의 광학적 특성을 분석하기 위해 투과율을 측정하고 광학 밴드갭을 얻었다. 광학 밴드갭은 약 5.0 eV로 나타났고 VI/III 비가 증가함에 따라 비례하여 증가하는 결과를 보여주었다. 이론적 광학 밴드갭에 가장 근접한 VI/III 비가 23인 조건에서 성장된 알파 갈륨옥사이드의 결정성을 확인하기 위해 HR-XRD를 이용하여 FWHM을 측정하였고 이를 바탕으로 전위밀도를 계산하였을 때 나선형 전위밀도는 $1.5{\times}10^7cm^{-2}$, 칼날 전위 밀도는 $5.4{\times}10^9cm^{-2}$로 계산되었다.