• Journal of the Korea institute for structural maintenance and inspection
• /
• v.4 no.2
• /
• pp.139-149
• /
• 2000

In the preliminary design stage of prestressed concrete (PSC) box girder bridges, the design factors decided by inexperience designer could heavily affect to the results of final design. There is a possibility that the design ends up with an excessively wasteful design. To achieve an economical design with preventing an excessive design, the optimal design technique has been developed using ADS optimal program and SPCFRAME in this study. The objective function for the optimal design problem is the material cost of box girders and constrained functions are constituted with design specifications and workability. The Sequential Unconstraint Minimization Technique (SUMT) is used for the optimal design in this study. We designed an uniform cross-section bridge and an ununiform cross-section bridge in the same design condition by optimal design technique developed in this study. Analyzing the results obtained for various tendon layouts, we suggest a standard tendon layout which gives the most effective structural behavior.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.28-36
• /
• 2018

Islands are supplied with power from diesel generation or from photovoltaic power generation, and problems with offshore environmental impacts (age deterioration, salt pollution), environmental pollution (exhaust gas, noise, dust) and power generation costs (installation, maintenance) have increasingly emerged. In 2016, the cost recovery rate was only 27%, and deficits reached 73% on 65 islands managed by KEPCO. In terms of deficits, the costs incurred in the power generation sector accounted for 91%, with the ratio of fixed costs at about 60%. Analysis suggests that operating costs can be reduced with an optimal power supply system that improves power generation efficiency and makes operating systems more efficient. Therefore, it is possible to simplify fuel transportation and facility maintenance, because one island integrates the power plants of remote islands, and offshore cable is used to supply power to the other islands. From the economic evaluations in this paper, an algorithm deciding offshore cable layout validity for an integrated power supply between adjacent islands is presented. Simulation results based on the proposed algorithm confirmed that an integrated power supply is economical for existing stand-alone operations on islands having diesel generation, low peak power, and near distances.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.4
• /
• pp.201-212
• /
• 2016

A Wind resource assessment and optimal micrositing of wind turbines were implemented for the development of an onshore wind farm of 30 MW capacity on Gadeok Island in Busan, Republic of Korea. The wind data measured by the automatic weather system (AWS) that was installed and operated in the candidate area were used, and a reliability investigation was conducted through a data quality check. The AWS data were measured for one year, and were corrected for the long term of 30 years by using the modern era retrospective analysis for research and application (MERRA) reanalysis data and a measure- correlate-predict (MCP) technique; the corrected data were used for the optimal micrositing of the wind turbines. The micrositing of the 3 MW wind turbines was conducted under 25 conditions, then the best-optimized layout was analyzed with a various wake model. When the optimization was complete, the estimated park efficiency and capacity factor were from 97.6 to 98.7 and from 37.9 to 38.3, respectively. Furthermore, the annual energy production (AEP), including wake losses, was estimated to be from 99,598.4 MWh to 100,732.9 MWh, and the area was confirmed as a highly economical location for development of a wind farm.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6A
• /
• pp.417-424
• /
• 2011

This study focused on development of 60 m span PSC girder considering not only structural performance, but also economical efficiency and constructability including from the improvement of cross-section to the tendon profiles in sequence. Bulb-T type cross section was derived from optimization and actual possibilities to design a bridge were assessed through cross section evaluation. Tendons were also arranged efficiently so that the girder could resist the service load effectively. After developed girder was applied to a sample bridge, result of finite element analysis proved all load steps were satisfied with the allowable stress. Furthermore, it seemed that sufficient redundancy will be available to design a bridge safely. Based on these, a full-scale 60 m span girder was fabricated and 4 point bending test was performed. An initial crack occurred over twice of the service load in this experiment, which establishes adequate structural performance. 60 m span Half-Decked PSC girder developed in this study has a lower height for the given span which resulted from cross section improvement and efficient tendon layout. This girder also has not only the structural advantage, but also advantages in economical efficiency and constructability.

• Journal of the Korea Furniture Society
• /
• v.23 no.1
• /
• pp.26-37
• /
• 2012

This is the study about the New Formation Developement, the Changeable Table Design with Units that made of Wasted Wood to use restricted material rationally and to improve the space efficiency in the Table Design. We made some changeable table design with units that made of laminated wood wasted. And we found out the following formative characteristic and physical merits through this study. First, the space efficiency can be improve technically through the unit combination and organic transfomation of the specific form and a new method by laminated wood make the personal originality and the structral stability be built up. Second, there are some merits, moveable convenience and variable layout by the combination or transformation or personal fondness so that economical efficiency and variable of design can be improved. Third, we can remove original faults inside wood like a knot or not-uniform of wood organ when we laminate wood so that we use proper units that have original beauty of wood and can represent mild mood of furniture wholly. Fourth, much more strengthen tensile strength by the reciprocal action among the units that be made of laminated wood reduces wood's metamorphosis like bending or twisting so that the uniformity of wood can be gain and furniture's metamorphosis can be reduced. According to changes of nature environment, the difficulty of supply and demand for wood may be happen. According to changes of life style these days, supply and demand for environment friendly material, processing technique and developement of design to improve the efficiency of using space must be very important factor in morden furniture design. So we propose changeable furniture design by using new environment friendly meterial and processing method from this study.

• Korean Institute of Interior Design Journal
• /
• v.19 no.2
• /
• pp.197-205
• /
• 2010

This study examines for the processes of making a architectural significant issue of 20 cases form of Beijjng's hotel through analyzing the space composition from early the 1950's to 1992 in China. In the methods of analyzing process, We study the literatures, research reports and architectural drawings including the site survey. We hope to establish the principle in morphological characteristics and space composition of Beijing's high-rise hotels through analyzing the plan of these hotels. Finally, We find out the principles after researching. Firstly, Beijing's hotels in China faced on the being difficulties through the process of national development especially in political and economical conditions of country and peoples. Consequently, size of the Beijing's hotel developed with the fact that is complicated from that is single styles focused on the medium-sized one, modernizing popularity and the high-rise hotel buildings appeared plentifully and the form appeared with tall building putting first. Secondly, there are many immanent and interlocking styles in hotel's architectural block plans, many composition styles in big sized hotels, in opposition immanent styles in small sized ones and there are many trend of concourse style in medium sized hotels. To the layout of hotel's room inside of the linear styles are many in big and medium sized hotels.

• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.577-584
• /
• 2003

Container terminals are various in terms of layout, cargo handling systems and operational aspects resulting in difference in productivity and economic feasibility. Therefore, by evaluating different terminal types, more comprehensive understanding can be grasped. For this the paper aims at evaluating the three terminal types under operation, the conventional terminal, the unmaned terminal and the indented terminal, with respect to productivity and cost. Based on the results in connection with the situation of Korean container terminal operation, feasibility for each type is discussed with suggestion for the optimal type.

• KIEAE Journal
• /
• v.9 no.2
• /
• pp.17-26
• /
• 2009

High-rise and high-density apartment complexes have been built and supplied on a large scale in the 1st period New Town of metropolitan areas since the late 1980s. Recently it has become necessary to improve those apartment complexes which have blight problems for aging more than about 20 years accompanying simultaneity and a large scale. The purpose of this study is to analyze actual conditions of high-rise and high-density apartments in a view of sustainable regeneration. The contents and methods of this study are as follows. First, the concept of high-rise and high-density in domestic apartment developments were identified through review of literature and the law. Second, development conditions of Bundang new town and 1st period new town were studied. Third, the evelopment conditions of high-rise and high-density apartments in cases of 6 apartment complexes were analyzed from points of view of sustainable development by literature review and a field study. The results of this study are as follows. First, high-density range in domestic apartments can be conceptualized as 600 persons/ha. High-rise range in domestic apartments can be onceptualized as more than 11 stories under 30 stories. Second, characteristics and subjects based on actual conditions analysis could suggest on physio-environmental aspect and socio-economic aspect. Major characteristics and subjects of the physio-environmental aspect were 1.satisfaction of convenient facilities and public transportation service, 2.shortage of parking space, 3.uniform & blight of community facilities, 4.uniformed building layout, and 5.uniform pattern of unit plan and low flexibility by the bearing wall structure. And those of the socio-economical aspect were 1.satisfaction of current community, 2.increase and diversity of needs of the elderly by socio-demography change, 3.improvement of size and method of apartment complex development and 4.raising of economic-sufficiency.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.9 no.2
• /
• pp.57-65
• /
• 2009

Housing Re-Development business is to improve the environment of old residential area and secure insufficient infrastructure facilities for the public, and to provide housing of fine quality for the individuals and it is taken as an opportunity for the individuals to be able to increase their property. However, it is true that the benefits from the redevelopment has not offered to the original dwellers who has lived there for a long time. This research studies the related systems of the Rental House Redevelopment Supply Service and is to present the schema to raise resettlement rate through the investment on the rate of tenants who chose the rental house and their specific characters. This study is to present the reform measures about the following 3 problems, on the basis of prior theoretical studies which deals with the common factors having low rate to move in the rental house of the tenants. (1) Physical side, the problem of supply structure, which is not appropriate Housing Supply Structure, (2) Psychological side, the problem of socially excluded rental house residents (3) Economical side, low re-settlement rate of tenants caused from the unreasonableness of the estimated rental value. This study presents that the compulsory rental housing supply rate should be changed to the gross area not from the number of households, and the supply of rental houses should correspond to the household size of tenants through prior demand survey. Secondly, it proposes the housing complex layout for intermixing to solve the social problems to allow a housing for sale and rental houses mixing in a building. And it proposes that the rental value should be calculated considering the neighboring value and in the long run, it should be calculated considering the tenants' income instead construction cost estimate. Also, it should be arranged to provide an opportunity to create income through resident welfare center improvement and provide self-sufficiency functions leading residents to participate in the residential area's repairing and maintenances.

• Journal of the Korean Solar Energy Society
• /
• v.35 no.4
• /
• pp.57-66
• /
• 2015

BIPV system not only produces electricity at building, but also acts as a material for building envelope. Thus, it can increase the economical efficiency of PV system by saving the cost for building materials. Bifacial solar cell can convert solar energy to electrical energy from both sides of the cell. In addition, it is designed as 3 busbar layout which is the same with ordinary mono-facial solar cells. Therefore, many of the module manufacturers can easily use the bifacial solar cells without changing their manufacturing equipments. Moreover, bifacial PV system has much potential in building application by utilizing glass-to-glass structure of PV module. However, the electrical generation of the bifacial PV module depends on the characteristics of the building surface which faces the module, as well as outdoor environment. Therefore, in order to apply the bifacial PV module to building envelope as BIPV system, its power generation characteristics are carefully evaluated. For this purpose this study focused on the electrical performance of the bifacial BIPV system through the comparative outdoor experiments. As a result, the power generation performance of the bifacial BIPV system was improved by up to 21% compared to that of the monofacial BIPV system. Therefore, it is claimed that the bifacial BIPV system can replace the conventional BIPV system to improve the PV power generation in buildings.