• Environmental Engineering Research
• /
• v.24 no.3
• /
• pp.463-473
• /
• 2019

Nanoscale zero-valent iron (nZVI) has proved to be an effective tool in applied environmental nanotechnology, where the decreased particle diameter provides a drastic change in the properties and efficiency of nanomaterials used in water purification. However, the agglomeration and colloidal instability represent a problematic and a remarkable reduction in nZVI reactivity. In view of that, this study reports a simple and cost-effective new strategy for ultra-small (< 7.5%) distributed functionalized nZVI-EG (1-9 nm), with high colloidal stability and reduction capacity. These were obtained without inert conditions, using a simple, economical synthesis methodology employing two stabilization mechanisms based on the use of non-aqueous solvent (methanol) and ethylene glycol (EG) as a stabilizer. The information from UV-Vis absorption spectroscopy and Fourier transform infrared spectroscopy suggests iron ion coordination by interaction with methanol molecules. Subsequently, after nZVI formation, particle-surface modification occurs by the addition of the EG. Size distribution analysis shows an average diameter of 4.23 nm and the predominance (> 90%) of particles with sizes < 6.10 nm. Evaluation of the stability of functionalized nZVI by sedimentation test and a dynamic light-scattering technique, demonstrated very high colloidal stability. The ultra-small particles displayed a rapid and high nitrate removal capacity from water.

• The Journal of the Korea Contents Association
• /
• v.18 no.12
• /
• pp.444-455
• /
• 2018

In regard to the growth and development of Innocity from improvements in Innocity settlement environment, this research examines the level of satisfaction of Innocity settlement environment to propose a political implications. We deduced the main cause of settlement environment satisfaction by performing logistic regression on the public institution employees level of satisfaction in respect to 4 Innocity characteristics?six physical properties, three social properties, five facility properties, three economical properties?and three general questions. As a result, the greatest factor of settlement environment was physical properties, such as natural environment and scenery, residential environment, availability of diverse uses in the surrounding area, and access to public transportation. In addition, social characteristics (relationships with neighbors), and facilities (availability of industrial, research and educational facilities) were also significant. This research provided political implications for future Innocity settlement environment improvements despite limiting factors such as residents' perception and limited surveyed sites.

• Stress
• /
• v.26 no.4
• /
• pp.259-267
• /
• 2018

Background: The purpose of this study was to identify the risk factors influencing cognitive function and life satisfaction in elderly living alone. Methods: It was cross-sectional descriptive study by using secondary data from the 2014 national survey of Korean elderly. The study sample consisted of 2,249 subjects who live alone, aged 65 years old and over. Data were analyzed frequency analysis, ${\chi}^2$-test, t-test, ANOVA and Logistic regression analysis. Results: The risk factors that significantly influenced cognitive function were old age, bereavement, lack of education, no regular exercise and low socio-cultural activity satisfaction. The risk factors that significantly influenced life satisfaction were no bereavement, lack of education, no work, negative evaluation of health status, diagnosis of depression and no regular exercise. Also experience of emotional and economical abuse, neglect of financial support and low cognitive function were identified risk factors of life satisfaction. Conclusions: The elderly living alone with risk factors of cognitive decline should be interested. To prevent or delay cognitive impairment, regular exercise and socio-cultural activities were recommended. It was suggested that the promotion of cognitive function, appropriate work and exercise, and social efforts to prevent abuse and neglect can contribute to improving life satisfaction of elderly living alone.

• Korean Journal of Veterinary Service
• /
• v.41 no.4
• /
• pp.263-269
• /
• 2018

Developing drugs targeting respiratory pathogen is essential to control respiratory diseases. Many experiments have been performed under in vivo situation. However, in vivo experiments have economical and ethical issues. The objective of this study was to determine the possibility of developing an ex vivo lung culture system with possible application for respiratory infection studies. After isolating lungs from naïve pigs, agarose-inflated lung tissues were prepared and sliced manually. These sliced lung tissues were then subsequently placed on 24-well plates. Eight different combinations of media were used to determine the optimum ex vivo lung culture condition. In addition, lung tissues were infected with porcine reproductive and respiratory syndrome (PRRS) virus at a titer of $1{\times}10^4\;TCID_{50}/mL$. Virus growth was confirmed by titration in MARC-145 cells at 2, 4, 6 days post infection (dpi). We found that ex vivo lung culture in physiological environment was not media specific based on histopathology and cytotoxicity. However, under virus-infected condition, thickened alveolar walls in the lung tissues and stable virus titers at 2, 4, 6 dpi were shown in F12K medium suggesting that it was useful for tissue maintenance and virus infection using PRRS virus infected lung tissues. The present study shows the possibility of using porcine ex vivo lung model for respiratory infection studies.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.4
• /
• pp.545-554
• /
• 2019

The purpose of this study is to develop a method of applying AR(Augmented Reality)/VR(Virtual Reality) to educational and training systems from a comprehensive perspective, rather than applying AR/VR technology to specific education and training systems. We suggested whether to apply AR or VR technology to education and training system, the level of application of technology when constructing using AR/VR technology, and the criteria of priority among many education and training systems. To do this, we presented the framework of application of AR/VR technology, the evaluation criteria for selecting priority of education and training system applying AR/VR, and the systematic procedure for utilization of developed method. This study is significant in that it has developed a method to determine the direction of systematic AR/VR technology application for all education and training systems operated by the military or organization. This is expected to contribute to the overall efficiency of the organization in terms of economical utilization of the limited budget as well as the various benefits of utilizing basic AR/VR technology.

• Korean Chemical Engineering Research
• /
• v.59 no.3
• /
• pp.450-454
• /
• 2021

Currently, gamma nuclide analysis is mainly used using inorganic scintillators or semiconductor detectors. These detectors have high resolution but there are less economical, limited in size, and low process ability than plastic scintillators. Therefore, quantum dot-based plastic scintillator was developed using the advantages of the quantum dot nanomaterial and the conventional plastic scintillator. In this study, efficient plastic scintillator was fabricated by adding CdS/ZnS based on the most widely used Cd-based nanomaterial in a polystyrene matrix. In addition, the performance of the commercial plastic scintillator was compared and it was analyzed through radiological measurement experiments. The detection efficiency of fabricated plastic scintillator was higher than commercial plastic scintillator, EJ-200. It is believed that this fabricated plastic scintillator can be used as a radioactivity analyzer in the medical and nuclear facility fields.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.3
• /
• pp.23-34
• /
• 2018

Due to a waste of energy in korea, about 525,000 which are 75 percent of total buildings are at least 15 years old buildings that need remodeling. There are two current remodeling systems. One is a remodeling system to reduce a waste of resources from the reconstruction. The other is a green-remodeling system aimed to energy savings and reducing environmental costs. This study is to analyze quantitatively these current systems with respect to the cost-benefit caused by the life cycle and suggests the political and institutional implications through the interpretation of the results. For a quantitative analysis, we analyzed reducing maintenance costs and rent benefits with simulation by using opportunity costs, construction costs, plan costs and supervision costs as expense variables and using the reduced floor area ratio, institutional incentives, energy, water resources and certified emission reduction(CER) as benefit variables. As a result of the empirical study, the green-modeling was more beneficial in the field of environment such as the energy savings, however, the final benefits of remodeling which has no green building certification costs but more floor area ratio incentives were more economical. The green-remodeling system focused on reducing environmental costs and energy savings needs a equatable institutional incentive system.

• Atmosphere
• /
• v.31 no.1
• /
• pp.85-100
• /
• 2021

The necessity of accurate high-resolution meteorological forecasts becomes increasing in socio-economical applications and disaster risk management. The Korea Meteorological Administration Post-Processing (KMAPP) system has been operated to provide high-resolution meteorological forecasts of 100 m over the South Korea region. This study evaluates and improves the KMAPP performance in simulating wind speeds over complex terrain areas using the ICE-POP 2018 field campaign measurements. The mountainous measurements give a unique opportunity to evaluate the operational wind speed forecasts over the complex terrain area. The one-month wintertime forecasts revealed that the operational Local Data Assimilation and Prediction System (LDAPS) has systematic errors over the complex mountainous area, especially in deep valley areas, due to the orographic smoothing effect. The KMAPP reproduced the orographic height variation over the complex terrain area but failed to reduce the wind speed forecast errors of the LDAPS model. It even showed unreasonable values (~0.1 m s-1) for deep valley sites due to topographic overcorrection. The model's static parameters have been revised and applied to the KMAPP-Wind system, developed newly in this study, to represent the local topographic characteristics better over the region. Besides, sensitivity tests were conducted to investigate the effects of the model's physical correction methods. The KMAPP-Wind system showed better performance in predicting near-surface wind speed during the ICE-POP period than the original KMAPP version, reducing the forecast error by 21.2%. It suggests that a realistic representation of the topographic parameters is a prerequisite for the physical downscaling of near-ground wind speed over complex terrain areas.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.2_2
• /
• pp.209-218
• /
• 2022

The purpose of this study is to analyze an economic assessment of PV-ESS systems based on the power generation performance data of solar power (PV) operating in domestic area, and to calculate the optimal capacity of the energy storage system. In this study, PVs in Gyeonggi-do, Jeollabuk-do, and Gyeongsangbuk-do were targeted, and PVs in this area were assumed to be installed on a general site, and the research was conducted by applying weights based on the facility's capacity. All the analysis was conducted using the actual amount of KPX transactions of PVs in 2019. In order to calculate the optimal capacity of PCS and BESS according to GHI, PV with a minimum/maximum/central value was selected by comparing the solar radiation before the horizontal plane between three years (2017-2019) of the location where PV was installed. As a result of the analysis, in Gyeonggi-do, if the REC weight decreases to 3.4 when there is no change in the cost of installing BESS and PCS, it is more economical to link BESS than PV alone operation of PV. In Jeollabuk-do, it was analyzed that if the REC weight was reduced to 3.6, it was more likely to link BESS than PV operated alone. In Gyeongsangbuk-do, it was analyzed that if the REC weight was reduced to 3.4, it was more likely to link BESS than PV operated alone.

• Geomechanics and Engineering
• /
• v.29 no.2
• /
• pp.183-192
• /
• 2022

Piled raft foundations are widely used and effective in supporting high-rise buildings around the world. In this study, a piled raft system was numerically simulated using PLAXIS 3D. The settlement comparison results between the actual building measurements and the three-dimensional (3D) numerical analysis, were in good agreement, indicating the usefulness of this approach for the evaluation of the feasibility of using a piled raft foundation in Ho Chi Minh City subsoil. The effects were investigated of the number of piles based on pile spacing, pile length, raft embedment on the settlement, load sharing, bending moments, and the shear force of the piled raft foundation in Ho Chi Minh City subsoil. The results indicated that with an increased number of piles, increased pile length, and embedding raft depth, the total and differential settlement decreased. The optimal design consisted of pile numbers of 60-70, corresponding to pile spacings is 5.5-6 times the pile diameter (D_p), in conjunction with a pile length-to-pile diameter ratio of 30. Furthermore, load sharing by the raft, by locating it in the second layer of stiff clay, could achieve 66% of the building load. The proposed model of piled raft foundations could reduce the total foundation cost by 49.61% compared to the conventional design. This research can assist practicing engineers in selecting pile and raft parameters in the design of piled raft foundations to produce an economical design for high-rise buildings in Ho Chi Minh City, Viet Nam, and around the world.