• 펄프종이기술
• /
• 제47권5호
• /
• pp.127-133
• /
• 2015

Recent worldwide trends are to develop the environmental friendly chemicals and processes in order to reduce the global warming and climate change phenomena. One of similar efforts in paper industry is to substitute the petroleum-based SBR latex by starch-based biobinder. The disadvantage of biobinder found through laboratory scale study was the lower dry pick strength than SBR latex. The objective of this study is to confirm the substitutability of SBR latex with biobinder through mill trial. Although biobinder itself gave lower dry pick strength, it was found that the use of SBR latex and biobinder mixture (50:50) could improve the dry pick strength. The introduction of biobinder into coating binder system improved the opacity of coated paper. Optical properties (brightness and whiteness), ink trapping, print gloss and mottling level of paper coated with biobinder system were similar to those of SBR latex.

• 한국인쇄학회지
• /
• 제31권1호
• /
• pp.15-37
• /
• 2013

Split digital printing into interior and outdoors on present advertisement. When is printing machine for interior mainly, use ink of water-based type. Equipment of this type embodies high resolution, but ink special quality light stability is weak. Also, when is printing machine for outdoors, printing machines of solvent or UV type are used because of water resistance and light stability. This printing machines hard to embody ink special quality high resolution mainly. And because outside is far visibility range, is uncommon in case high resolution requires embodiment. Therefore, high resolution of inside is water-based type considering this item and outside printing machine of low resolution solvent type mainly announce. Also, divide into eco-friendly latex ink type that is announced to water-based, solvent, UV according to ink type and the latest market using in occasion of digital printing machine used as advertisement industry. Color management that is been consistent of original image has a lot of difficulties by using substrate that is also various to digital printing machine for such various advertisement. But, consumers is rising realization about color or desire about quality improvement of color gradually in interior outside advertisement market. So, require solution method. Therefore, in this paper, eco-friendly ink use applied device calibration through linearization in done latex digital printing machine to basis. And studied right color management plan of digital printing for interior outside advertisement through three steps such as G7 calibration application and ICC profile application.

• 펄프종이기술
• /
• 제44권5호
• /
• pp.32-38
• /
• 2012

This study was carried out to elucidate the potential in substitution of SB latex with eco-friendly starch based bio-binder as a coating binder. The part of SB latex in coating color of pre- and top layer was substituted with starch based bio-binder in order to evaluate the characteristics of coating color and coated paper, and printability. The viscosity and water retention of coating color were increased by substitution of SB latex with starch based bio-binder. Roughness of coated paper was increased by substitution with starch based bio-binder, although there was not significant changes in roughness when SB latex is used as a binder in pre-coating color. Brightness and whiteness of coated paper were not affected, but opacity and print mottle were improved by substitution with starch based bio-binder. The interesting result observed was that dry-pick did not affected significantly, and ink set-off was improved by starch based bio-binder. It is expected that starch based bio-binder can be commercialized if the systematic further research works are carried out.

• 펄프종이기술
• /
• 제46권6호
• /
• pp.63-70
• /
• 2014

Part of SB latex in pre-coating color was substituted with newly developed starch-based bio-binder in order to investigate the effect of starch-based bio-binder in pre-coating color on the properties of coating color and coated paper. Smoothness and gloss of coated paper were decreased with the increase of bio-binder substitution ratio. Brightness and whiteness did not show the significant changes, but stiffness was improved with bio-binder. Ink set-off, dry-pick and wet pick were decreased with the increase of bio-binder substitution ratio. In general, when all SB latex is substituted with bio-binder, ink set-off, dry- and wet-pick were deteriorated. However, it was found that if the bio-binder substitution ratio is controlled below 50%, similar qualities with coated paper manufactured by the use of SB latex binder can be obtained.

• 펄프종이기술
• /
• 제47권1호
• /
• pp.10-16
• /
• 2015

Bio-binder is well known as a promising alternative binder for SB latex because it is eco-friendly and inexpensive, compared to synthetic latex. SB latex in top coating color was substituted with starch-based bio-binder to investigate its effects on the coating color and its coated paper properties. Bio-binder contributed to the increase of coating color viscosity, and the improvement of water retention. Most optical properties except opacity were deteriorated by the increase of bio-binder dosage. It was also found that the increase of bio-binder substitution in top coating color brought about the increase of roughness, and decrease of coated paper gloss, print gloss, dry and wet pick strength. However the stiffness and the ink set-off of the bio-binder coated paper were improved. Overall, mostly adverse effects of bio-binder on the properties of coating color and its paper were observed. Therefore, it is not recommended to use bio-binder as top coating color.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2011년도 추계학술발표회 논문집
• /
• pp.39-41
• /
• 2011

The recycling rate of recovered paper in Korea is the highest in the world, 92%, but remanufacturing yield is low due to the extremely poor quality of the paper. The poor quality, in turn, influences to the reject amount in deinking process. To increase the yield of old newspaper recycling process, hydrophobic degree of inorganic pigments of deinking stock must be reduced. To determine the hydrophobicity, Pitch Potential Deposit Tester (PDT) was newly designed and applied with respect to the SB latex property of various quality used in Korea; its hydrophobic degree according to Tg, gel content, charge and particle size of latex and optimum designing condition of SB latex. And below are the conclusions: 1. The reason of excessive reject from old newspaper deinking process for total amount of printed ink is loss of inorganic pigments. When lipase, a biochemical catalyst, was applied with the purpose of preventing inorganic pigments loss about more than 70% of total reject weight and promoting hydration of pulp for deinking, deinking process yield of pre flotation secondary stage increased remarkably without any changes of deinking efficiency. 2. Lipase improved deinking stock by cutting ester linkage on surface of hydrophobic materials to promote its hydration. From this, it reached the conclusion that hydration degree of stock exercises significant effect on flotation deinking process yield. 3. Inorganic alkali promotes hydration of deinking stock. But there have been needs for more fundamental measures other than inorganic alkali of promoting hydration for yield improvement. For this, this study intended to find out reasons of chemical properties change on surface of hydrophobic material by change of pH. 4. Pitch Deposit Test (PDT) was performed for understanding principle of why surface of coating flake from OMG is hydrophobic and why it becomes hydrophilic when pH of stock is alkaline. As a result of this test, it is determined that swelling property by change of pH of latex film, which were used as coating adhesive is the reason for hydrophobic change. 5. Hydrophilicity of coating flake increased with hydrophilic pigments. And as more of SB Latex adhesive was used and higher of calcium hardness of stock became, its hydrophilicity decreased. SB Latex adhesive film is reformed by mechanical friction. For having hydrophilicity under neutral pH, strong bruising action such as kneading is required. 6. Because swelling of adhesive film decreases as Tg of SB latex gets lower and mean diameter gets smaller, it shows hydrophobicity under neutral pH. This lowers hydrophilicity of coating flake, which leads to easy elimination with flotation reject on DIP process. Therefore, for improving future flotation yield, it is necessary to develop to use eco-friendly clean SB latex by raising Tg and increasing mean diameter for recycling, and as a result, to reduce excessive loss of coating flake as a reject from deinking process.