• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.1
• /
• pp.59-66
• /
• 2011

Lifeline Damages induced by earthquake loading brings not only a structure damage but the communication problems by the interruption of various energy utilities such as electric power, gas, and water resources. Earthquake loss estimation systems in USA and Japan, called as HAZUS (Hazard in US) and HERAS (Hazards Estimation and Restoration Aid System), respectively, have been established for the purpose of efficient responding to the earthquake hazard. Sufficient damage records are required to establish these systems. However, there are insufficient data set of damage records obtained from previous earthquakes in Korea. In this study, according to the construction specifications of the pipelines in both Korea and USA, the behavior of both ductile and brittle pipelines embedded in dense sand overlying various soils, such as clay, sand, and gravel were examined with respect to the pipeline characteristics under various earthquake loadings. The applicability of pipeline damage prediction used in HAZUS program to Korea has been investigated.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.18 no.3
• /
• pp.151-160
• /
• 2014

Probabilistic tsunami hazard analysis (PTHA) is based on the approach of probabilistic seismic hazard analysis (PSHA) which is performed using various seismotectonic models and ground-motion prediction equations. The major difference between PTHA and PSHA is that PTHA requires the wave parameters of tsunami. The wave parameters can be estimated from tsunami propagation analysis. Therefore, a tsunami simulation analysis was conducted for the purpose of evaluating the wave parameters required for the PTHA of Uljin nuclear power plant (NPP) site. The tsunamigenic fault sources in the western part of Japan were chosen for the analysis. The wave heights for 80 rupture scenarios were numerically simulated. The synthetic tsunami waveforms were obtained around the Uljin NPP site. The results show that the wave heights are closely related with the location of the fault sources and the associated potential earthquake magnitudes. These wave parameters can be used as input data for the future PTHA study of the Uljin NPP site.

• Structural Engineering and Mechanics
• /
• v.49 no.3
• /
• pp.355-372
• /
• 2014

Considering the history of severe earthquakes and the presence of active faults in the greater Tehran region, the possibility of a destructive earthquake occurring is high and seismic hazard analysis is crucial. Gumbel distributions are commonly-used statistical distributions in earthquake engineering and seismology. Their main advantage is their basis on the largest earthquake magnitudes selected from an equal-time predefined set. In this study, the first asymptotic distribution of extremes is used to estimate seismicity parameters and peak ground acceleration (PGA). By assuming a Poisson distribution for the earthquakes, after estimation of seismicity parameters, the mean return period and the probable maximum magnitude within a given time interval are obtained. A maximum probable magnitude of 7.0 has a mean return period of 100 years in this region. For a return period of 475 years, the PGA in the greater Tehran region is estimated to be 0.39g to 0.42g, depending on local site conditions. This value is greater than that of the Iranian Code for Seismic Design of Buildings, indicating that a revision of the code is necessary.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.23 no.6
• /
• pp.301-309
• /
• 2019

A methodology to assess seismic fragility of a nuclear power plant (NPP) using a conditional mean spectrum is proposed as an alternative to using a uniform hazard response spectrum. Rather than the single-scenario conditional mean spectrum, which is the conventional conditional mean spectrum based on a single scenario, a multi-scenario conditional mean spectrum is proposed for the case in which no single scenario is dominant. The multi-scenario conditional mean spectrum is defined as the weighted average of different conditional mean spectra, each one of which corresponds to an individual scenario. The weighting factors for scenarios are obtained from a deaggregation of seismic hazards. As a validation example, a seismic fragility assessment of an NPP containment structure is performed using a uniform hazard response spectrum and different single-scenario conditional mean spectra and multi-scenario conditional mean spectra. In the example, the number of scenarios primarily influences the median capacity of the evaluated structure. Meanwhile, the control frequency, a key parameter of a conditional mean spectrum, plays an important role in reducing logarithmic standard deviation of the corresponding fragility curves and corresponding high confidence of low probability of failure (HCLPF) capacity.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1997.10a
• /
• pp.11-26
• /
• 1997

It has knows that the seismicity of the Korean Peninsula is relatively inactive than those of adjacent northern China and southwestern Japan. Recently the review of long term historical records and recent seismicity. In addition, it is considered that the modern society is more vulnerable to seismic hazard because of high urbanization and industrialization. From this viewpoint, the improvement and modification of the present regulation for aseismic design is strongly proposed. The purpose of the present study is to prepare seismic hazard maps for Korea to be used in improving the present regulation. The present study was performed as a cooperative project of eight Korean seismologists. Each seismologist calculated independently seismic hazard value at the given grid points based on his own judgement about methodology and seismicity. Then the values are unified with equal weight to produce a seismic hazard map. Seven seismic hazard maps for peak acceleration with 10 percentile probability of exceedance in 5, 10, 20, 50, 100, 250, 500 years are presented. This probability of exceedancd in such years corresponds to return period of 48, 95, 190, 475, 950, 2373, 4747 years, respectively. It is recommended to use a hazard map to be selected on the basis of the importance and the design level of structures.

• Structural Engineering and Mechanics
• /
• v.47 no.4
• /
• pp.471-493
• /
• 2013

This paper presents a framework for seismic damage evaluation for Algerian buildings adapted from HAZUS approach (Hazard-United States). Capacity and fragility curves were adapted to fit the Algerian building typologies (Reinforced Concrete structures, Confined or Non-Confined Masonry, etc). For prediction purposes, it aims to estimate the damages and potential losses that may be generated by a given earthquake in a prone area or country. Its efficiency is validated by comparing the estimated and observed damages in Boumerd$\grave{e}$s city, in the aftermath of Boumerd$\grave{e}$s earthquake (Algeria: May $21^{st}$ 2003; $M_w$ = 6.8). For this purpose, observed damages reported for almost 3,700 buildings are compared to the theoretical predictions obtained under two distinct modelling of the seismic hazard. In one hand, the site response spectrum is built according to real accelerometric records obtained during the main shock. In the other hand, the effective Algerian seismic code response spectrum (RPA 99) in use by the time of the earthquake is considered; it required the prior fitting of Boumerd$\grave{e}$s site PGA (Peak Ground Acceleration) provided by Ambraseys' attenuation relationship.

• Journal of the Korean Geosynthetics Society
• /
• v.8 no.1
• /
• pp.1-10
• /
• 2009

Earthquake induced landslides have caused tens of thousands of deaths and billions of dollars of damage during the last century alone. Determining the potential seismic hazard presented by statically stable slopes is essential for the evaluation of substantial landslide movement during an earthquake. Newmark's method for estimating landslide displacement under dynamic loading was presented and applied to two case studies. A simplified energy-based method was then be developed to estimate the Newmark's displacement.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.597-600
• /
• 2008

Observed ground motions from the January 2007 magnitude 4.9 Odaesan earthquake and the events occurring in the Gyeongsang provinces are compared with the previously proposed ground attenuation relationships in the Korean Peninsula to select most appropriate one. The selected relationship from the ones for the Korean Peninsula has been compared with attenuation relationships available in HAZUS. Then, the attenuation relation for the Western United States proposed by Sadigh et al.(1997) for the Site Class B has been selected for this study. It has been used for the earthquake loss estimation of the Gyeongju area located in southeast Korea using the deterministic method in HAZUS with a scenario earthquake (M=6.7). Application of the improved methodology for loss estimation in Korea will help decision makers for planning disaster responses and hazard mitigation.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2006.03a
• /
• pp.479-486
• /
• 2006

This paper presents tile results of experimental studies of the isolated Model EDG Systems. For the experimental work, the scaled model of EDG system and the isolation systems were developed. The target EDG model is 16PC2-5V400 which was manufactured by the SEMT Pielstick corporation. The Coil Spring and Viscous Damper Systems were selected for the isolation system. The Coil Spring and Viscous Damper systems can reduce not only seismic forces but also the operating vibration. For the input seismic motions, the scenario earthquake and the artificial earthquakes which were developed as NRC design spectrum and Uniform hazard Spectrum(UHS) were selected. As a result, at least 20% of seismic forces were decreased as the isolation system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.3
• /
• pp.599-606
• /
• 2015

Damage of landslide due to earthquake covers a considerable part of total damage due to earthquake. Landslide due to earthquake affects direct damage of human lives and structures, and social system can be paralyzed by losing functions of roads, basic industries, and so on. Therefore, systematic and specialized research examining the factors affecting the slope stability by earthquakes should be needed. However, method of evaluation of slope stability problems due to earthquake contains somewhat uncertainty since many soil properties are predicted or assumed. In this study, influences of change of soil properties such as degree of saturation and cohesion value are analyzed in factor of safety and displacement using seismic landslide hazard maps based on GIS. As the degree of saturation increases or cohesion decreases, it is found that seismic landslide hazard area marked with factors of safety or displacements tends to increase. Therefore, to draw more exact landslide hazard map during earthquake, it is necessary to obtain accurate soil property information preferentially from site investigation data in the field.