• International Journal of Highway Engineering
• /
• v.11 no.3
• /
• pp.23-32
• /
• 2009

In this paper an experimental program was launched to determine the mechanical and durability properties of spall repair materials (RCC: 3 items, PCC: 2 items, PC: 3 items). Test items were mechanical property tests such as setting times, strengths, modulus of elasticity, plastic shrinkage, and durability tests such as dynamic modulus ratio, bond property with freeze-thaw, water absorption, chemical resistance, ultraviolet exposure. Modulus of the PC products exhibits ductile while the modulus is in the order of RCC > PCC > PC. At early ages the PC products experience higher plastic shrinkage than others, henceforth stable at 28 days. Other test results such as dynamic modulus ratio, absorption, and chemical resistance show that the PCs are superior to the PCCs and the RCCs. Except for PC-2, all patch materials had bond strength more than 1.3MPa after freeze-thaw cycles of 200~300 while the PCs and the PCCs seem to be better than the RCCs. With 500 hours of ultraviolet exposure, all patch materials showed to have no crack or deterioration at the surface.

• Journal of Chest Surgery
• /
• v.30 no.8
• /
• pp.739-746
• /
• 1997

A variety of experiments concerning the development of ideal prosthetic grafts for correcting circumferential tracheal defects have been performed. The requirements for an ideal tracheal prosthesis are impermeability to air, consistency to prevent collapse, and acceptance by the host tissue causing a minimum inflammatory reaction, allowing fibroblastic infiltration and epithelialization. The synthetic material, polyurethane(PU), is known as a biocompatible polymer with an inert component. In this study, the tracheal prosthesis was made from microporous PU(30 micrometer in diameter) coated with gelatin and reinforced with isoplastic rings. This procedure provides the prosthesis with a compression strength. The out side diame er of the prosthesis was 20 mm with a length of 30 mm. The gelatin used in the study was obtained from pig skin and immobilized and cross-linked by irradiation(60 Co gamma ray) to promote host tissue incorporation and render the prosthesis epithelization after implantation. Animal experiments using 10 mongrel dogs were performed to compare three kinds of prosthesis; gelatin coated polyurethane graft, uncoated polyurethane graft, and prosthesisf pericadium complex graft. After 6 weeks of implantation, the epithelialization of implants was seen on the gelatin-coated and prosthesisfpericadium complex grafts. Implanted prosthesis were complicated by airway obstruction due to anastomosis granuloma. Early tracheal stenosis was found in the uncoated graft group. Two kind of anastomosis techniques were tested on the gelatin-coated prosthesis. Everted anastomosis resulted severe granuloma than the inverted anastomosis. In the prosthesislpericadium complex graft, bacteria and inflammation at a anastomotic site was found. Based on these results, gelatin coated porous polyurethane trachea prosthesis is biocompatible and may be useful in clinical application with further investigation.

• Land and Housing Review
• /
• v.3 no.4
• /
• pp.415-421
• /
• 2012

In case of Korean housing complex, there became more mixed arrangement of buildings with different number of layers for a variety of urban skyline, recently. For example, around 33% of the construction sites of 'A' public corporation have gaps of more than 4 layers between high-rise buildings and low-rise ones in the same site, according to the survey. Generally, construction duration of the housing complex is estimated based on the layers of the highest building. Due to this baseline, whole construction duration could be extended so that the project cost could be increased. Therefore, framework duration of higher-rise buildings should be reduced to secure the feasibility of the project. On the other hands, these shortenings could adversely harm the feasibility in some cases because there are a wide range of combinations of the buildings with different number of layers in designing housing complex. Therefore, this study shows the results of analysis on effects of framework time shortening on the cost in housing complex project. Moreover, this could set the baseline of checking possibilities in condensing the construction duration of projects with buildings of different layers by supplying comprehensive database.

• Journal of Korea Water Resources Association
• /
• v.38 no.3 s.152
• /
• pp.235-244
• /
• 2005

This study was carried out in Osan river to quantitatively investigate behavior of attacked microbial community (AMC) for enhancing self-purification process of river. We gained the results such as follows throughout long-term monitoring at in-situ river. The biomass of AMC had higher in the riffle than the almost stagnant pool and they were more developed in the riffle with high current velocity (HCV). Although the fast flowing current affects negatively to growth of the AMC during the early phase when the community gets attached to the benthic substrate, it was observed that it affected positively to their growth during the intermediate and later phase after the community is adapted to the substrate. When turbulence due to external pressure (storm or discharge of dam and reservoir) occurs, the degree of separation depends upon the flowing strength and the type of the external pressure. Since the community is not all separated, recovery is rather fast. Therefore, this study found that the degree of reduction of the pollutant by self-purification of the stream is depended upon the riverbed shape and the AMC contributes to self-purification positively or negatively in river. Therefore, the riverbed shape must be constructed in accordance with the characteristics of water quality in stream. Furthermore, the technique of installing the water channel structure appropriate for each section must be developed to maximize self-purification ability.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.358-373
• /
• 1997

Resin modified glass ionomers were introduced in 1988 to overcome the problems of moisture sensitivity and low early mechanical strength of conventional glass ionomers and to maintain their clinical advantages. The purpose of this study was to evaluate the color stability of four resin modified glass ionomers(Fuji II LC, Vitremer, Dyract and VariGlass), one resin composite material(Z-100), and one conventional glass ionomer(GC Fuji II) under several conditions. These conditions were as follows: 1) before curing, 2) after curing, 3) after polishing, 4) after 500 thermocycling, 5) after 1,000 thermocycling, 6) after 1,500 thermocycling and 7) after 2,000 thermocycling. Three specimens of each material/shade combination were made. Materials were condensed into metal mold with a diameter of 10 mm and a thickness of 2.0 mm, and were pressed between glass plates. The material was polymerized using a light polymerizing unit(Visilux II, 3M, USA). After removal of excess, the surface was polished sequentially on wet sandpapers. A reflection spectrophotometer(Model TC-6FX, Tokyo Denshoku Co., Japan) was used to determine CIELAB coordinates($L^*,a^*$ and $b^*$) of each specimen. CIE standard illumination C was used as the light source. The results were as follows : 1. In comparing different shades of same material, CIELAB color difference(${\Delta}E^*$) value was not significantly different from each other(p>0.05). 2. CIELAB color difference(${\Delta}E^*$) values between after-curing and after-polishing were ranged from 5.53 to 27.08. These values were higher than those of other condition combinations. 3. CIELAB color difference(${\Delta}E^*$) values between before-thermocycling and after-thermocycling were ranged from 1.40 to 7.81. Despite the number of thermocycling increased, CIELAB color difference(${\Delta}E^*$) value was low. 4. The color stability of resin modified glass ionomers was more stable than that of conventional glass ionomers but less stable than that of Z100.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.1
• /
• pp.40-48
• /
• 2017

RC flat plates may be governed by a serviceability as well as a strength condition, and a construction sequence and its impact on the distributions of gravity loads among slabs tied by shores are decisive factors influencing short and long term behaviors of flat plate. Over-loading and tensile cracking in early-aged slabs significantly increase the deflection of a flat plate system under construction, and a reshoring work may be helpful in reducing slab deflections by controlling the vertical distributions of loads in a multi-shored flat plate system. In this study, a effect of reshoring works on short and long term deflections of flat plate systems are analyzed. The slab construction loads with various reshoring schemes and slab design and construction conditions are defined by a simplified method, and the practical calculation of slab deflections with considering construction sequences and concrete cracking and long term effects is applied. From parametric studies, the reshoring works are verified to reduce slab deflections, and the optimized conditions for the reshoring works and slab design and constructions are discussed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.83-90
• /
• 2017

Concrete structure for nuclear power plant is mass concrete structure with large wall depth and easily permits cracking in early age due to hydration heat and drying shrinkage. It always needs cooling water so that usually located near to sea shore. The crack on concrete surface permits rapid chloride intrusion and also causes more rapid corrosion in the steel. In the study, the effect of age and crack width on chloride diffusion is evaluated for the concrete for nuclear power plant with 6000 psi strength. For the work, various crack widths with 0.0~1.4 mm are induced and accelerated diffusion test is performed for concrete with 56 days, 180days, and 365 days. With increasing crack width over 1.0mm, diffusion coefficient is enlarged to 2.7~3.1 times and significant reduction of diffusion is evaluated due to age effect. Furthermore, apparent diffusion coefficient and surface chloride content are evaluated for the concrete with various crack width exposed to atmospheric zone with salt spraying at the age of 180 days. The results are also analyzed with those from accelerated diffusion test.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.6
• /
• pp.25-34
• /
• 2019

VTON (Virtual try-on) is a key technology that can activate the online commerce of fashion items. However, the early 3D graphics-based methods require the 3D information of the clothing or the human body, which is difficult to secure realistically. In order to overcome this problem, Image-based deep-learning algorithms such as VITON (Virtual image try-on) and CP-VTON (Characteristic preserving-virtual try-on) has been published, but only a sampled results on performance is presented. In order to examine the strength and weakness for their commercialization, the performance analysis is needed according to the complexity of the clothes, the object posture and body shape, and the degree of occlusion of the clothes. In this paper, IoU and SSIM were evaluated for the performance of transformation and synthesis stages, together with non-DL SCM based method. As a result, CP-VTON shows the best performance, but its performance varies significantly according to posture and complexity of clothes. The reasons for this were attributed to the limitations of secondary geometric deformation and the limitations of the synthesis technology through GAN.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.38 no.3
• /
• pp.205-213
• /
• 2005

A hydroacoustic and a close-open-close zooplankton net survey were conducted to understand the distribution characteristics of the deep scattering layer (DSL) and to estimate the density of zooplankton in the DSL, in the Uljin coastal area. The survey was carried out during March 13-14 and June 4-5, 2003 at each station for zooplankton. The vertical migration mechanisms of zooplankton are very variable to the taxa. In this study, after we grasp the vertical migration of zooplankton through the results of an echo-sounder survey, we verified the mechanisms of their vertical migration in the Uljin coastal area. Also, to estimate effectively the biomass of zooplankton, we researched the acoustic scattering strength according to the species. On the basis of these results, we devised a method for estimating zooplankton biomass through comparing net and echo-soundings. We obtained the results as a follows; 1) According to the examination of collections from the net sampling, in March, 2003, Euphausia pacifica comprised $38\%$ of zooplanktons inhabiting the sound scattering layer, while copepods, chaetognaths, and amphipods accounted for $29\%,\;23\%\;and\;10\%$, respectively. And in June, 2003, the ratio of E. pacifica was $51\%$, copepods $43\%$, and the others comprised $6\%$. In both March and June E. pacifica showed dominance among the species of zooplankton. 2) The analysis of vertical distribution through acoustic data in the scattering layer was more apparent in June (spring/summer) of 2003, than in March (winter/spring) of that year. The vertical migration of zooplankton peaked around sunrise and sunset in both March and June. 3) As for the sound scattering layer, it distributed in the open sea in March, and in the inland sea in June. Therefore it is suggested that some zooplankton species such as E. pacifica performed ontogenic horizontal migration througth the spring and early summer.

• Journal of Digital Convergence
• /
• v.9 no.6
• /
• pp.399-410
• /
• 2011

The purpose of this study was to develop cooperative learning model by utilizing mind practice to build mutual understandings and reliability among team members at the early stage of cooperative learning model That is to say, mind practice was applied to make the team members understanding one another and building the member's mutual confidences. The study was performed by dividing into two stages. First, the draft of mind practice based on cooperative learning model was proposed by performing a literature survey and a case study. Second, the draft model was applied to actual classrooms. And the draft was modified and developed to the final model on the basis of the draft model's strength and improvement founded during the procedure of the actual application. This draft model was implemented to 46 students who were the sophomore of department of education and enrolled the profession class of "Education methodology and Education engineering" at J college in J city for 5 weeks. From the implementation result of the model, it was obtained that there was the positive reaction on applying mind practice to the beginning stage of cooperative learning. Adding of "Re-building team" step in the original steps was suggested. The final model was modified and issued based on the research result. In summary, it was concluded that cooperative learning model based on mind practice could not only provide the harmonious interactions among team members at the step of "building the team members" but also have a positive effect on refreshing learning atmosphere of the team.