• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.3
• /
• pp.151-156
• /
• 2006

This study was conducted to investigate effects of granular silicate fertilizer(GSF) on growth, nutrient uptake and quality rice during cultivation. Then the chemical properties of paddy soil used for the cultivation test were pH 5.9, O.M. $13.7g\;kg^{-1}$, avail. $P_2O_5$ $48.9mg\;kg^{-1}$, and avail. $SiO_2$ $79.8mg\;kg^{-1}$. The amounts of GSF treated in the paddy soil were 0, 76, 185, 229, 413 and $489kg\;10a^{-1}$ for control, S-100(control amounts of soil available $SiO_2$), S-130, S-160, S-190 and for S-210 treatments, respectively. At results of rice growth leaf length and tiller number were more remarkable results at treatments of GSF than control. The leaf length of rice at S-100 treatment was the highest as 99.4 cm and the tiller number was the highest as 18.9 ear number at S-130 treatment. At the results of rice yield parameters, the grain and straw yield of rice were showed that all of the GSF applicated treatments were more predominant level than at the control, especially their levels were the highest values as 841.5 and $815.2kg\;10a^{-1}$ at the S-160 treatment, respectively. Also at the results of quality parameters on rice grain, a perfect kernel in the GSF applicated treatments was more increased than at control, but a broken kernel rate was inversely decreased. In results of these aspects, the chemical properties of white rice and the taste of rice by the Toyo MA-90A(Toyo rice quality taster) instrument, amylose content was the lowest value as 18.7%(generally about 20%) at S-160 treatment. Also, Mg/K ratio and rice taste value were the highest level as 0.58 and 69.1 at the S-190 and S-160 treatments respectively. The harvest yields of rice at S-160 and S-190 treatments from these growth factors were more produced about 8-13% than control. Therefore, the GSF application for rice cultivation from these results should be expected to obtain the positive effects as enhancement of rice harvest yield and improvement of quality on the cooked rice taste. Amount of GSF application could be recommended as around $200mg\;kg^{-1}$ for optimal and economical rice cultivation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.3
• /
• pp.251-260
• /
• 2011

This study was carried out to compare growth characteristics and yield of silage corn hybrids at four different regions (Hwaseong, Dangjin, Gochang and Pyeongchang). Two domestic corn hybrids, 'Kwangpyeongok' and 'Gangdaok', and two imported corn hybrids, 'P3394' and '32P75' were used in this study. Plant height and ear height ratio were not significantly different among corn hybrids. 'Kwangpyeongok' was the strongest of all corn hybrids for lodging. The others except 'Kwangpyeongok' were similar to lodging. All corn hybrids were excellent to stay-green. Incidence of southern corn leaf blight (Bipolaris maydis) was low at all corn hybrids. '32P75' was 10.1%, the most of all corn hybrids for incidence of BSDV (black streaked dwarf virus). 'Kwangpyeongok' and 'Gangdaok' were stronger than '32P75' for BSDV. Fresh yield of 'Kwangpyeongok' and 'Gangdaok' were the most of all corn hybrids as 74.85 and 76.68 ton/ha and 'P3394' was the least of all corn hybrids as 64.97 ton/ha. Dry matter yield as 18.83~21.92ton/ha and TDN yield as 12.73~14.52 ton/ha were not significantly different among corn hybrids.

• Journal of Nutrition and Health
• /
• v.55 no.3
• /
• pp.359-375
• /
• 2022

Purpose: Adult Korean men belonging to the main economically active population are known to have long sedentary hours. This study was undertaken to determine the difference and relevance of sedentary hours on the nutrition, diet, and health status of adult men, and to suggest how to prevent health risk factors. Methods: Subjects (n = 1,068) were classified into 4 groups based on their sedentary hours, ranging from the first quartile (Q1) having the least hours spent sitting, to the fourth quartile (Q4) spending the longest hours. Results: Subjects belonging to Q4 had the lowest average age, the largest waist circumference, and the highest level of education. Among those engaged in economic activities, the ratio of white-collar workers was significantly higher in Q4. Accordingly, the rate of not doing high-intensity or moderate-intensity physical activity while working was also the highest in Q4. A significant difference was obtained in the drinking frequency between groups, but this was found to be associated with the average working hours rather than sedentary hours. The proportion of not doing aerobic exercise was higher with longer sitting hours. The highest diagnosis of diabetes (8.8%) was obtained in the Q4 group. Among the factors related to cardiovascular disease, only low density lipoprotein-cholesterol showed a significant difference, with Q4 being significantly higher than Q1. Considering energy and nutrient intake, vitamin B₁ and calcium intake were the lowest in the group with the longest sitting hours, as well as the least consumption of vitamin C than the recommended estimated average requirement. Conclusion: The results of this study suggest that the health and nutritional status of Korean adult men are affected by sedentary hours. This should be recognized as a health risk factor and guidelines need to be developed for sedentary lifestyle management.

• Journal of Nutrition and Health
• /
• v.56 no.5
• /
• pp.510-522
• /
• 2023

Purpose: In this study, data from the 7th Korea National Health and Nutrition Examination Survey (2016-2018) were used to examine the relationship between the prevalence of anemia and dietary intake among adults according to household types. Methods: Using data from a total of 10,646 subjects (4,428 men and 6,218 women), the general information, body measurements, results of biochemical examination, food and nutrient intake, and meal quality evaluation were analyzed according to the type of household. Results: The prevalence of anemia was higher in men belonging to single-person households (SPH) than in those from multi-person households (MPH), while anemia prevalence was higher among the women in the MPH than in the SPH. The men in SPH had a lower total food intake of nuts, vegetables, fruits, fish, and seaweed than the men in MPH, and consumed higher quantities of milk, oil, and processed foods. The women from SPH had a lower intake of seaweed and a higher intake of milk than those belonging to the MPH. In addition, the men in SPH had a lower iron intake and iron intake per 1,000kcal than the men in MPH, lower iron intake through plant-based foods, and a lower iron intake ratio compared to the reference nutrient intake. The total Korean Healthy Eating Index (KHEI) score was lower in both men and women in SPH than in those from the MPH. When analyzing the relationship between household type and anemia risk after correcting for the confusion variable, the risk of anemia in men in SPH increased compared to those belonging to the MPH. However, women showed no such significant correlation. There was no relationship between the total KHEI score and the risk of anemia by gender and household type. Conclusion: In conclusion, since anemia in men belonging to SPH is a matter of concern, it is essential to develop guidelines for anemia-related nutrition education for men living alone.

• Journal of Nutrition and Health
• /
• v.42 no.7
• /
• pp.650-663
• /
• 2009

The purposes of this study were to investigate one portion size of menus served and to evaluate nutrient intake of lunch at three elderly care facility food services located in Seoul. A weighed plate method was employed to measure plate wastes and consumption of the menus served. Yield factors were calculated from cooking experiments based on standardized recipes, and were used to evaluate nutrient intake. One hundred elderly participated in this study for measuring plate waste and were asked to complete questionnaire. Nutrient analyses for the served and consumed meal were performed using CAN program. The yield factors of rice dishes after cooking are 2.4 regardless of rice dish types, 1.58 for thick soups, 0.60 to 0.70 for meat dishes, and 1.0 to 1.25 branched vegetable. Average consumption quantity of dishes were 235.97 g for rice, 248.53 g for soup, 72.83 g for meat dishes, 39.80 g for vegetables and 28.36 g for Kimchi. On average the food waste rate is 14.0%, indicating the second highest plate waste percentage of Kimchi (26.2%), and meat/fish dish (17.3%). The evaluation results of NAR (Nutrition Adequacy Ratio) showed that iron (0.12), calcium (0.64), riboflavin (0.80), and folic acid (0.97) were less than 1.0 in both male and female elderly groups, indicating significant differences of NAR among three facilities. Compared to the 1/3 Dietary Reference Intake (DRIs) for the elderly groups, nutrient intake analysis demonstrated that calcium (100%) and iron (100%), followed by riboflavin, vitamin A, and Vitamin B6 did not met of the 1/3 EAR (Estimated Average Requirement). For the nutritious meal management, a professional dietitian should be placed at the elderly care center to develop standardized recipes in consideration of yield factors and the elderly's health and nutrition status.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.2
• /
• pp.123-130
• /
• 2013

This study was conducted to investigate the effects of climate change on the growth characteristics and dry matter yields of silage corn hybrids in fields of forage crops of Hanwoo Experiment Station, National Institute of Animal Science, RDA, from Apr. 2009 to Sep. 2011. Corn hybrids were cultivated in Daegwallyeong of Gangwon Province, at an altitude of 760 m. Corn varieties used in this study consisted of 5 domestic varieties and 5 foreign varieties. Differences of silk days according to years occurred at an average of 5.5 days. The silk periods of domestic varieties occurred from Aug. 8 to 12, while that of overseas varieties was from Aug. 5 to 11. Silk days of domestic varieties occurred approximately 3 to 4 days earlier than those of oversea varieties. Silk days of Kwangpyeongok and P3156 belonging to the early varieties were Aug. 8 and 5, respectively. Kwangpyeongok and P3156 were Aug. 8 and 5, respectively. Pyeonganok and DK729 belonged to late varieties. The mean plant height of corn was approximately 231 cm, while those of Kwangpyeongok and Pyeonganok were 236 cm and 237 cm, respectively. The mean stem diameter and ear height of corn were approximately 23.2 mm and 94 cm, respectively. In the case of stem diameters, those of Cheonganok and 33J56 were 86 cm and 80 cm, respectively, while Gangdaok grew to a greater height (enter height) than other varieties. Dry matter yields of Kwangpyeongok and Pyeonganok were higher than those of other varieties. The mean leaf ratio of corn was 39.3%, while that of domestic varieties increased as compared to foreign varieties. The average DM yield of corn was 16,653 kg/ha, while those of 32P75, P3156, Pyeonganok, P3394 and Kwangpyeongok were 18,901, 17,997, 17,675, 17,194, 17,188 kg/ha, respectively. Total digestible nutrient (TDN) yields of 32P75, P3156, P3394, Pyeonganok and Kwangpyeongok were 13,381, 12,590, 12,532, 12,140 and 12,036 kg/ha, respectively. Corn crude protein (CP), in vitro dry matter digestibility (IVDMD), neutral detergent fiber (NDF), acid detergent fiber (ADF) and TDN were 7.8%, 74.2%, 42.4%, 23.5% and 70.3%, respectively. In the case of nutritive values of corn, there was no significant difference between of corn varieties of domestic and foreign origin.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.10
• /
• pp.1-43
• /
• 1971

Experiment I: The objective of this study was to know variation in some selected agronomic characters of sweet sorghum when planted in several growing seasons. The 17 different sweet sorghum varieties having various maturities, and plant, syrup and sugar types were used in this study which had been carried out for the period of two years from 1968 to 1969 at Industrial Crops Division of Crop Experiment Station in Suwon. These varieties were planted at an interval of 20 days from April 5 to August 25 both in 1968 and 1969. The experimental results could be summarized as follows: 1. As planting was made early, the number of days from sowing to germination was getting prolonged while germination took place early when planted at the later date of which air temperature was relatively higher. However, such a tendency was not observed beyond the planting on August 25. In general, a significant negative correlation was found between the number of days from sowing to germination and the average daily temperature but a positive correlation was found between the former and the total accumulated average temperature during the growth period. 2. The period from sowing to heading was generally shortened as planting was getting delayed. The average varietal difference in number of days from sowing to heading was as much as 30.2 days. All the varieties were grouped into early-, medium and late-maturing groups based upon a difference of 10 days in heading. The average number of days from sowing to heading was 78.5$\pm$4.5 days in the early-maturing varieties, 88.5$\pm$4.5 days in the medium varieties and 98.5$\pm$4.5 days in the late-maturing varieties, respectively. The early-maturing varieties had the shortest period to heading when planted from July 15 to August 5, the medium varieties did when planted before July 15 and the late-maturing varieties did when planted before June 5. 3. The relationship between the sowing date (x) and number of days from sowing to heading could be expressed in an equation of y=a+bx. A highly positive correlation was found between the coefficient of the equation(shortening rate in heading time) and the average number of days from sowing to heading. 4. The number of days from sowing to heading was shortened as the daily average temperature during the growth period was getting higher. Early-maturing varieties had the shortest period to heading at a temperature of 24.2$^{\circ}C$, medium varieties at 23.8$^{\circ}C$ and late-maturing varieties at 22.9$^{\circ}C$, respectively. In other words, the number of days from sowing to heading was shortened rapidly in case that the average temperature for 30 days before heading was 22$^{\circ}C$ to $25^{\circ}C$. It prolonged relatively when the temperature was lower than 21$^{\circ}C$. 5. There was a little difference in plant height among varieties. In case of early planting, no noticeable difference in the height was observed. The plant height shortened generally as planting season was delayed. Elongation of plant height was remarkably accelerated as planting was delayed. This tendency was more pronounced in case of early-maturing varieties rather than late-maturing varieties. As a result, the difference in plant height between the maximum and the minimum was greater in late-maturing varieties than in early-maturing varieties. 6. Diameter of the stalk was getting thicker as planted earlier in late-maturing varieties. On the other hand, medium or early-maturing varieties had he thickest diameter when they were planted on April 25. 7. In general, a higher stalk yield was obtained when planted from April 25 to May 15. However, the planting time for the maximum stalk yield varied from one variety to another depending upon maturity of variety. Ear]y-maturing varieties produced the maximum yield when planted about April 25, medium varieties from April 25 to May 15 and late-maturing varieties did when planted from April 5 to May 15 respectively. The yield decreased linearly when they were planted later than the above dates. 8. A varietal difference in Brix % was also observed. The Brix % decreased linearly when the varieties were planted later than May 15. Therefore, a highly negative relationship between planting date(x) and Brix %(y) was detected. 9. The Brix % during 40 to 45 days after leading was the highest at the 1st to the 3rd internodes from the top while it decreased gradually from the 4th internode. It increased again somewhat at the 2nd internode from the ground level. However, it showed a reverse relationship between the Brix % and position of internode before heading. 10. Sugar content in stalk decreased gradually as planting was getting delayed though one variety differed from another. It seemed that sweet sorghum which planted later than June had no value as a sugar crop at all. 11. The Brix % and sugar content in stalk increased from heading and reached the maximum 40 to 45 days after heading. The percentage of purity showed the same tendency as the mentioned characters. Accordingly, a highly positive correlation was observed between. percentage of purity and Brix % or sugar content in stalk. 12. The highest refinable sugar yield was obtained from the planting on April 25 in late-maturing varieties and from that on May 15 in early-maturing varieties. The yield rapidly decreased when planted later than those dates. Such a negative correlation between planting date(x) and refinable sugar yield(y) was highly significant at 1% level. 13. Negative correlations or linear regressions between delayed planting and the number of days from sowing to germination. accumulated temperature during germination period, number of days to heading, accumulated temperature to heading, plant height, stem diameter, stalk weight, Brix %. sugar content, refinable sugar yield or Purity % were obtained. On the other hand, highly positive correlations between the number of days from sowing to heading(x) and Brix %, sugar content, purity %, refinable sugar yield, plant height or stalk yield, between Brix %(x) and purity %, refinable sugar yield or stalk yield, between sugar content(x) and purity% or refinable sugar yield(y), between purity %(x) and refinable sugar yield and between daylength at heading(x) and Brix %. number of days from sowing to heading, sugar content, purity % or refinable sugar yield (y), were found, respectively. Experiment II: The 11 varieties were selected out of the varieties used in Experiment I from ecological and genetic viewpoints. Complete diallel cross were made among them and the heading date, stalk length, stalk yield, Brix %, syrup yield, combining ability and genetic behavior of F$_1$ plants and their parental varieties were investigated. The results could be summarized as follows: 1. In general, number of days to heading showed a partial dominance over earliness or late maturity or had a mid-value, though there were some specific combinations showing a complete dominance or transgressive segregation in maturity. Some combinations showed relatively high general or specific combining abilities in maturity. Therefore, a 50 to 50 segregation ratio in heading date could be estimated in this study and it might be positive to have a selection in early generation since heritability of the character was relatively high. 2. A vigorous hybrid vigor was observed in stalk length. A complete or partial dominant effect of long stalk was obtained. The general combining ability and specific combining ability of stalk length were generally high. Long and short stalks segregated in a ratio of 50:50 and its heritability was relatively low. 3. Except for several specific combinations, high stalk yield seemed to be partial dominant over the low yield. Some varieties demonstrated relatively high general as well as specific combining abilities. It was assumed that several recessive genes were involved in expression of this character. The interaction among regulating recessive genes was also obtained. Accordingly, the heritability of stalk yield seemed to be rather low. 4. The Brix % of hybrid plants located around mid-parental value though some of them showed much higher or lower percentage. It could be explained by the fact that such behavior might be due to partial dominance of Brix %. The varieties with, relatively higher Brix % were high both in general. and specific combining abilities. Therefore, it could be recommended to use the varieties having higher sugar content in order to develop higher-sugar varieties. 5. The syrup yield seemed to be transgressively segregated or completely dominant over low yield. Hybrid vigor of syrup yield was relatively high. No-consistent relationship between general combining ability and specific combining ability was observed. However, some cases demonstrated that the varieties with relatively higher general combining ability had relatively lower specific combining ability. It was assumed that the frequencies of dominant and recessive alleles were almost same.