• 한국통신학회논문지
• /
• 제22권6호
• /
• pp.1251-1258
• /
• 1997

Generally, it is very important to study selective coupling between cavities of the filter structure using multimode cavity resonator. In this paper, we have manufactured 5-pole bandpass filter(BPF) using dual and triple-mode cavity resonator. To do so, we have derived the formulas for coupling coefficient about coupling between TE-modes from TM/TE-mode's tangential and lognitudinal field intensities each other. To implement the Chebyshev response, the intercabity slot combining dual-mode and triple-mode is designed to couple one H-field of TE-mode parallel to slot plate. In this paper, specially it is derived the formulas for T $E_{11p}$-mode from TE-modes, and determined after obtaining location and size of intercabity slot from the equation. In this ppaer, based on this result, we designed and implmented teh bandpass filter operated at the center frequency of 14.5GHz with a Chebyshev response. For the manufactured cavity filter, dual-mode and triple-mode cavity are resonted by two orthogonal T $E_{113}$-modes, and by two orthogonal T $E_{113}$-modes and one T $M_{012}$-mode, respecitively. The 2-stage 5-pole BPF proposed in this paper has the insertion loss of -2.32dB, the reflection loss of -15dB in the passband, and the out-or-rejection of -67dB.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.361-365
• /
• 2003

In this paper, we proposed the effective serial connection methodology of PBG resonator with defect mode. We use the big difference of impedance ratio in connection region, for example dual PBG, for serial connection. This method reduces the PBG cells and is able to control the pole of bandpass filters. This result in flexibility in design of bandpass filter. Our PBG bandpass filter is modeled by using the ideal transmission line model. This model is very easy, fast, and effective for PBG structure.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2024년도 춘계학술발표대회
• /
• pp.87-88
• /
• 2024

최근 대규모 애플리케이션의 효율적인 운영을 위한 컨테이너 기술의 도입이 급격하게 이루어지고 있으며, 이에 따라 컨테이너 환경의 보안을 향상하기 위한 여러 기술이 제안되고 있다. 특히 악성 컨테이너의 무분별한 시스템 콜 사용을 막기 위해 Seccomp 정책을 통한 접근 제어 기술을 제공하고 있지만, 현재 컨테이너가 사용하고 있는 Seccomp의 경우 시스템 콜 정책을 업데이트하기 위해서는 컨테이너를 재배포해야 한다는 한계점을 가지고 있다. 본 논문은 이를 해결하기 위해 eBPF와 LSM을사용하여 컨테이너 종료 없이 동적으로 시스템 콜 사용을 제한할 수 있는 KubeRosy를 제안한다.

• 한국환경농학회지
• /
• 제36권3호
• /
• pp.154-160
• /
• 2017

본 연구는 하천수 중 bisphenol계 화합물 종 6 (BPA, BPB, BPC, BPE, BPF, BPS)을 동시분석하기 위하여 GC-MS를 이용하였다. 또한 최적의 전처리 방법을 확립하고자 SPE 및 LLE법을 이용하여 표준시료로부터 검량선의 직선성, MDL, LOQ, 정확도 및 정밀도를 비교하였다. SPE 및 LLE 전처리 방법에 의한 MDL은 각각 $0.0005{\sim}0.0234{\mu}g/L$와 $0.0037{\sim}0.2034{\mu}g/L$, LOQ는 각각 $0.0015{\sim}0.0744{\mu}g/L$와 $0.0117{\sim}0.6477{\mu}g/L$, 검량선의 결정계수($r^2$)는 모두 0.9969이상 정확도는 각각 93.2~108%와 97.4~120%, 정밀도는 각각 1.7~4.6%와 0.7~6.5%범위로 만족한 정도관리 결과를 얻었다. 하지만 SPE법에 의한 MDL 및 LOQ 값은 LLE법보다 약 4~45배 정도 높은 감도를 보였고, 특히 BPA의 경우는 다른 화합물들보다 45배 정도 높았다. 따라서, 본 연구에서는 SPE법을 적용하여 하천수 시료를 분석하였고, 조사지점은 본류 7개, 지류 6개, 하수종말처리장 2개 지점을 선정하였다. Bisphenol계 화합물 중에서 BPB, BPC, BPE, BPF 및 BPS는 모두 불검출 되었으나, BPA 농도는 $0.0095{\sim}0.2583{\mu}g/L$ 범위로 본류 $0.0166{\sim}0.0810{\mu}g/L$, 지류 $0.0095{\sim}0.2583{\mu}g/L$, 하수종말처리장$0.0352{\sim}0.1217{\mu}g/L$으로 미량 수준이었다.

• 전기학회논문지
• /
• 제65권5호
• /
• pp.857-861
• /
• 2016

In this study, we proposed a new method that can be measure ECG (Electrocardiography) and PPG (Photoplethysmography) in realtime on the site of the wrist for check the state of health in daily life. For convenience measurement of ECG the lead I method was used on the wrist, and omit the reference junction ECG I was measured in the right hand and the left hand of the potential difference. Then the measured electrocardiogram was amplified by the differential amplifier and the signals were passed HPF, LPF, and BPF filters. For removing the PPG's noise from the Motion artifact and temperature, we apply the reflective photoelectric volume pulse wave measurement method using green LED as a light source. The circuits was designed to be able to check the waveform using higher active amplification method at weak signals. For the validation of our device, the measured signals were compared with E2-KIT on same time. The results shows that the error does not exceed the maximum one, most of the data is confirmed to be issued Peak inspection of the same number.