• Korean Journal of Environment and Ecology
• /
• v.36 no.4
• /
• pp.422-432
• /
• 2022

Soil and micro-climatic environmental monitoring was conducted to evaluate the factors causing tree growth impediments at the Baekdudaegan ecological axis restoration project site. As a result, it was found that the nutrient supply was insufficient in the restoration project site due to the lack of organic matter, total nitrogen and cation exchange capacity of the soil compared to the surrounding forest. After the completion of the restoration, the soil moisture in the autumn decreased more than 7 times faster than that of the surrounding forest, and it was evaluated that the soil moisture was significantly low due to the lack of silt and clay content. In the case of the restoration site, the annual potential evapotranspiration was analyzed to be 975mm, which is approximately two times higher than that of the surrounding forest. The soil moisture of the restoration site in the summer decreased rapidly during the daytime when the amount of insolation increased and this was found to be strongly influenced by the increase in potential evapotranspiration. In order to improve the above factors affecting the tree growth at the Baekdudaegan ecological axis restoration project site, it is necessary to induce the smooth supply of nutrients and water to plants by improving physical proprieties and cation exchange capacity, i.e., using litterfall, humus soil, soil conditioner and organic fertilizer. The results of this study are expected to serve as basic data for the design, construction, and management of ecological axis restoration projects in the future.

• Journal of Wetlands Research
• /
• v.25 no.1
• /
• pp.14-25
• /
• 2023

Floodplain in a reservoir is defined as the area naturally formed between the design flood level and the normal pool level. Located around the dam reservoir, floodplain has been damaged in many different ways including cultivation. As it is impossible to restore all the damaged floodplain at once, it is necessary to determine their order of priority. This process considers various factors, among which the flooding frequency is an important hydrologic characteristic, Different from the floodplains in a river, all the floodplains around the given dam reservoir have the same flooding frequency. To overcome this problem, this study proposes to use the cumulative flooding area curve, which represents the cumulative flooding area corresponding to the reservoir water level. Especially, this study evaluates the flooding frequency of those water levels corresponding to the cumulative flooding area of 30%, 50% and 70%. As application examples, this study considers the five restoration candidates each selected in the Andong Dam, Imha Dam, Youngju Dam and Nam river Dam of the Nakdong River Basin. As a result, the cumulative flooding area curve was found to well represent the overall shape of the floodplain (i.e., steep-to-mild slope or mild-to-steep slope). Also, the flooding frequency of those water levels corresponding to the cumulative flooding area of 30%, 50% and 70% was found to be so effective to quantify the hydrologic characteristics of a floodplain.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2003.09a
• /
• pp.44-44
• /
• 2003

As a basic measurement tool in the areas of animal models of human disease, gene expression and therapy, and drug discovery and development, small animal PET imaging is being used increasingly. An ideal small animal PET should have high sensitivity and high and uniform resolution across the field of view to achieve high image quality. However, the combination of long narrow pixellated crystal array and small ring diameter of small animal PET leads to the degradation of spatial resolution for the source located at off center. This degradation of resolution can be improved by determining the depth of interaction (DOI) in the crystal and by taking into account the information in sorting the coincident events. Among a number of 001 identification schemes, dual layer phsowich detector has been widely investigated by many research groups due to its practicability and effectiveness on extracting DOI information. However, the effects of each crystal length composing dual layer phoswich detector on DOI measurements and image qualities were not fully characterized. In order to minimize the DOI effect, the length of each layer of phoswich detector should be optimized. The aim of this study was to perform simulations using a simulation tool, GATE to design the optimum lengths of crystals composing a dual layer phoswich detector. The simulated small PET system employed LSO front layer LuYAP back layer phoswich detector modules and the module consisted of 8${\times}$8 arrays of dual layer crystals with 2 mm ${\times}$ 2 mm sensitive area coupled to a Hamamatsu R7600 00 M64 PSPMT. Sensitivities and variation of radial resolutions were simulated by varying the length of LSO front layer from 0 to 10 mm while the total length (LSO + LuYAP) was fixed to 20 mm for 10 cm diameter ring scanner. The radial resolution uniformity was markedly improved by using DOI information. There existed the optimal lengths of crystal layers to minimize the variation of radial resolutions. In 10 cm ring scanner configuration, the radial resolution was kept below 3.4 mm over 8 cm FOV while the sensitivity was higher than 7.4% for LSO 5 mm : LuYAP 15 mm phoswich detector. In this study, the optimal length of dual layer phoswich detector was derived to achieve high and uniform radial resolution.

• Journal of Animal Science and Technology
• /
• v.65 no.1
• /
• pp.132-148
• /
• 2023

Ruminants are the main contributors to methane (CH₄), a greenhouse gas emitted by livestock, which leads to global warming. In addition, animals experience heat stress (HS) when exposed to high ambient temperatures. Organic trace minerals are commonly used to prevent the adverse effects of HS in ruminants; however, little is known about the role of these minerals in reducing enteric methane emissions. Hence, this study aimed to investigate the influence of dietary organic trace minerals on rumen fermentation characteristics, enteric methane emissions, and the composition of rumen bacteria and methanogens in heat-stressed dairy steers. Holstein (n=3) and Jersey (n=3) steers were kept separately within a 3×3 Latin square design, and the animals were exposed to HS conditions (Temperature-Humidity Index [THI], 82.79 ± 1.10). For each experiment, the treatments included a Control (Con) consisting of only basal total mixed rations (TMR), National Research Council (NRC) recommended mineral supplementation group (NM; TMR + [Se 0.1 ppm + Zn 30 ppm + Cu 10 ppm]/kg dry matter), and higher concentration of mineral supplementation group (HM; basal TMR + [Se 3.5 ppm + Zn 350 ppm + Cu 28 ppm]/kg dry matter). Higher concentrations of trace mineral supplementation had no influence on methane emissions and rumen bacterial and methanogen communities regardless of breed (p > 0.05). Holstein steers had higher ruminal pH and lower total volatile fatty acid (VFA) concentrations than Jersey steers (p < 0.05). Methane production (g/d) and yield (g/kg dry matter intake) were higher in Jersey steers than in Holstein steers (p < 0.05). The relative abundances of Methanosarcina and Methanobrevibacter olleyae were significantly higher in Holstein steers than in Jersey steers (p < 0.05). Overall, dietary organic trace minerals have no influence on enteric methane emissions in heat-stressed dairy steers; however, breed can influence it through selective alteration of the rumen methanogen community.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.27 no.1
• /
• pp.25-35
• /
• 2023

Considering the non-linear behavior of structure and soil when evaluating a nuclear power plant's seismic safety under a beyond-design basis earthquake is essential. In order to obtain the nonlinear response of a nuclear power plant structure, a time-domain SSI analysis method that considers the nonlinearity of soil and structure and the nonlinear Soil-Structure Interaction (SSI) effect is necessary. The Boundary Reaction Method (BRM) is a time-domain SSI analysis method. The BRM can be applied effectively with a Perfectly Matched Layer (PML), which is an effective energy absorbing boundary condition. The BRM has a characteristic that the magnitude of the response in far-field soil increases as the boundary interface of the effective seismic load moves outward. In addition, the PML has poor absorption performance of low-frequency waves. For this reason, the accuracy of the low-frequency response may be degraded when analyzing the combination of the BRM and the PML. In this study, the accuracy of the analysis response was improved by adjusting the PML input parameters to improve this problem. The accuracy of the response was evaluated by using the analysis response using KIESSI-3D, a frequency domain SSI analysis program, as a reference solution. As a result of the analysis applying the optimal PML parameter, the average error rate of the acceleration response spectrum for 9 degrees of freedom of the structure was 3.40%, which was highly similar to the reference result. In addition, time-domain nonlinear SSI analysis was performed with the soil's nonlinearity to show this study's applicability. As a result of nonlinear SSI analysis, plastic deformation was concentrated in the soil around the foundation. The analysis results found that the analysis method combining BRM and PML can be effectively applied to the seismic response analysis of nuclear power plant structures.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.4
• /
• pp.31-44
• /
• 2023

A base expansion micropile was developed to improve the bearing capacity of the micropile, which bears a simple device installed at the pile base. Under an axial load, this base expansion structure radially expands at the pile tip and attaches itself around ground, compressing the boring wall in the construction stage. In this study, conventional and base expansion micropiles were constructed in the weathered rock where micropiles are commonly installed. Further, field load tests were conducted to verify the bearing capacity enhancement effect. From the load test results, it was revealed that the shaft resistance of base expansion micropiles was about 12% higher than that of conventional micropiles. The load transfer analysis results also showed that compared to conventional micropiles, the unit skin friction and unit end bearing of base expansion micropiles were 15.4% and 315.1% higher, respectively, in the bearing zone of the micropile.

• Journal of Korea Trade
• /
• v.26 no.4
• /
• pp.1-22
• /
• 2022

Purpose - This paper empirically investigates the effect of a rise in the global value chain (GVC) on the industry-level efficiency of resource allocation (based on plant-level inefficiency measures) in Korea, with a focus on various channels through which a rise in the GVC can increase competition among firms and thus induce resources to be allocated more efficiently across firms. Design/methodology - We empirically investigate the relationship between the industry-specific importance of GVC and the industry-level allocative inefficiency that is measured as the dispersion of the plant-level marginal revenue of capital (MRK) as in Hsieh and Klenow's (2009) influential model. We compute MRK dispersion for industries sorted by various characteristics that are closely related to firm/industry sensitivity to the GVC. In other words, we compute the average industry-level MRK dispersion for industries sorted by industry-specific importance of GVC and compute the difference between the two groups of industries (higher vs. lower than the median GVC); we also calculate the difference between industries sorted by industry-specific export (import) intensity. This is our difference-in-difference estimate of the MRK dispersion associated with the GVC for the export (import)-intensive industry versus the non-export (non-import)-intensive industry. This difference-in-difference estimate of the MRK dispersion conditional vs. unconditional on firm-level productivity is then calculated further (triple-difference estimate). Findings - A rise in GVC is associated with a decrease in the MRK dispersion in the export-intensive industry compared to the non-export-intensive industry. The same is true for industries that rely heavily on imports versus those that do not (i.e., import intensive vs. non-intensive). Furthermore, the reduction in the MRK dispersion in the export-intensive industry associated with an increase in the GVC is disproportionately greater for high-productivity firms. In contrast, the negative relationship between GVC and MRK dispersion in the import-intensive industry is disproportionately smaller for high-productivity firms. Originality/value - Existing studies focus on the relationship between GVC and aggregate output, exports, and imports at the country level. We investigate detailed firm/industry-level mechanisms that determine the relationship between GVC, trade, and productivity. Using the plant-level data in South Korea, we investigate how GVC is related to the cross-firm MRK dispersion, an important measure of allocative inefficiency, based on Hsieh and Klenow's (2009) influential economic theory. This is the first study to provide plant-level evidence of how GVC affects MRK dispersion. Furthermore, we examine how the relationship between GVC and MRK-dispersion varies across export intensity, import intensity, and firm-level productivity, providing insight into how GVC can affect firms' exposure to competition in the global market differently depending on market conditions and thus generate trade-related productivity gains.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.3
• /
• pp.25-40
• /
• 2007

Excessive earth pressure is one of the major mechanical factors in the deformation and damage of Cut-and-Cover Tunnel lining in shallow tunnels and portals of mountain tunnels (Kim, 2000). Excessive earth pressure may be attributed to insufficient compaction and consolidation of backfill material due to self-weight, precipitation and vibration caused by traffic (Komiya et al., 2000; Taylor et al., 1984; Yoo, 1997). Even though there were a lot of tests performed to determine the earth pressure acting on the tunnel lining, unfortunately there were almost no case histories of studies performed to determine remedial measures that reduce differential settlement and excessive earth pressure. In this study the installation of geotextile mat was selected to reduce the differential settlement and excessive earth pressure acting on the cut-and-cover tunnel lining. In order to determine settlement and earth pressure reduction effect (reinforcement effect) of geotextile mat reinforcement, laboratory tunnel model tests were performed. This study was limited to the modeling of rigid circular cut-and-cover tunnel constructed at a depth of $1.0D\sim1.5D$ in loose sandy ground and subjected to a vibration frequency of 100 Hz. Model tests with varying soil cover, mat reinforcement scheme and slope roughness were performed to determine the most effective mat reinforcement scheme. Slope roughness was adjusted by attaching sandpaper #100, #400 and acetate on the cut slope surface. Mat reinforcement effect of each mat reinforcement scheme were presented by the comparison of earth pressure obtained from the unreinforced and mat reinforced model tests. Soil settlement reduction was analyzed and presented using the Picture Analysis Method (Park, 2003).

• Journal of the Korean Geotechnical Society
• /
• v.22 no.11
• /
• pp.47-54
• /
• 2006

Shear wave velocity of uncemented soil can be expressed as the function of effective stresses when capillary phenomena are negligible. However, the terms of effective stresses are divided into the direction of wave propagation and polarization because stress states are generally anisotropy. The shear wave velocities are affected by ${\alpha}$ parameters and ${\beta}$ exponents that are experimentally determined. The ${\beta}$ exponents are controlled by contact effects of particulate materials (sizes, shapes, and structures of particles) and the ${\alpha}$ parameters are changed by contact behaviors among particles, material properties of particles, and type of packing (i.e., void ratio and coordination number). In this study, consolidation tests are performed by using clay, mica and sand specimens. Shear wave velocities are measured during consolidation tests to investigate the stress-induced and inherent anisotropies by using bender elements. Results show the shear wave velocity depends on the stress-induced anisotropy for round particles. Furthermore, the shear wave velocity is dependent on particle alignment under the constant evvective stress. This study suggests that the shear wave velocity and the shear modulus should be carefully estimated and used for the design and construction of geotechnical structures.

• Journal of Korea Trade
• /
• v.26 no.6
• /
• pp.1-19
• /
• 2022

Purpose - This study empirically investigates the effects of Official Development Assistance (ODA) on the economic activities of private actors in recipient countries. As a proxy for the economic activities of private actors, we utilize the job creation activities of foreign subsidiaries in recipient countries. The foreign subsidiaries provide a foundation for economic development by creating paying jobs. That is, if ODA has been successfully transferred to foreign subsidiaries, then these foreign subsidiaries should help economic growth and help create a boom in the local market by providing jobs. These jobs eventually lead to the achievement of the primary aims of foreign aid, including poverty reduction. Thus, this study empirically examines the relationship between ODA and the number of jobs created by foreign subsidiaries in recipient countries. Design/methodology - This is the first study to examine the effects of the ODA on the job creation of foreign subsidiaries because it has been hard to obtain internal information related to the employment status of foreign subsidiaries. Fortunately, we have a unique panel dataset provided by the Export-Import Bank of Korea (KEXIM) for 2006 to 2013. In terms of the empirical specification, we use the generalized least squares (GLS) method. The panel GLS estimator allows us to have an efficient estimation that overcomes the limitations of the panel data. It employs assumptions about the heteroscedasticity between the panels and makes an autocorrelation of the error term within each panel. Findings - We find that ODA influences job creation in foreign subsidiaries. In particular, we found that ODA creates more jobs in sales than in managerial or production positions. This study also shows that the effect of the ODA on the foreign subsidiaries' job creation activities depend on the purpose of the ODA. By examining ODA effects on the foreign subsidiaries' economic activities (e.g., job creation), this study fills a gap in the current literature. Originality/value - Existing studies that focus on the ODA effect have either a macroeconomic point or a microeconomic point of view. However, both approaches do not explain how well foreign aid has influenced private economic actors of recipient countries. In essence, previous researchers found it difficult to obtain the necessary data for internal employment status from foreign subsidiaries. However, thanks to the Korea Export-Import Bank, this study shows that ODA indeed influences the job creation activities of foreign subsidiaries even after controlling for other factors such as FDI, GDP growth rate, employment rate, household expenditure, mother firms' share, etc. By doing so, we can examine how ODA influences the job creation of foreign subsidiaries, which might help economic development and reduce the amount of poverty in recipient countries.