• 수산해양기술연구
• /
• 제44권3호
• /
• pp.218-228
• /
• 2008

This paper describes on the real-time tracking of ship's dynamic behavior by AIS information in the coastal waters. The AIS data was received at a land station by using the antenna of AIS receiver mounted on the rooftop of the laboratory, Pukyong National University (PKNU), Busan, Korea, and stored as a NMEA format of serial output sentence of VDM(VHF Data-Link Message) and displayed on the ENC(Electronic Navigational Chart) of a PC-based ECDIS. In this study, the AIS receiver was mainly used to obtain the dynamic information that is necessary to evaluate and track the movement situation of training ship "KAYA" of PKNU in the coastal waters. The change of position with time for the ship turning under the rudder angle of port $30^{\circ}$ was correctly tracked with the turning circle of 940 m in diameter on the ENC of a PC-based ECDIS. Then, the dynamic information of the AIS system was updated every 6.29 seconds under the turning situation for the speed of 10.9 knots and every 21.65 seconds under the situation running at the speed of 11.05 knots on the straight line route of $155^{\circ}$, respectively. In case of AIS target tracking in the inshore zone behind large topographical obstructions, such as mountain and apartment buildings, the update rate of dynamic information was irregularly changed by the existence of land obstacles. However, the position tracking by AIS information under the situation existing no sea obstructions was achieved in real or near real-time and the instant presentation of course alternations for the ship was correctly monitored by using a PC-based ECDIS. From these results, we concluded that the PC-based ECDIS technology and methodology combined with the AIS information can be easily extended and applied to the surveillance and management for the fishing operation of fishing vessels in the coastal zone and in the EEZ fishing grounds.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2007년도 가을 학술발표논문집 Vol.34 No.2 (B)
• /
• pp.435-440
• /
• 2007

무선 센서 네트워크는 다양한 환경에서 자연의 정보를 수집하여 인간이 필요로 하는 형태로 정보를 제공하는 네트워크이다. 이러한 센서 네트워크는 수많은 무선 센서 노드들로 이루어지고, 이들은 원격지에서 동작한다. 각 센서 노드는 자연 환경의 정보를 센싱하고, 무선 네트워크를 통하여 센싱 데이터를 사용자에게 전달한다. 만약 소프트웨어의 코드 갱신을 수행해야 한다면, 이는 원격에서 수행 중에 이루어져야 한다. 이 때에, 각 센서 노드의 자원 제약을 고려하여 보다 자원 효율적으로 동작해야 한다. 본 논문에서는 MCUP이라 불리는 무선 센서 노드를 다중 수준 코드 갱신 프로토콜을 제안한다. 제안한 기법은, 다양한 수준에서 다양한 크기의 코드에 대한 동적 재구성을 지원한다. 본 논문의 시뮬레이션 결과를 통하여, MCUP을 사용하였을 때에 전체 센서 네트워크에서의 코드 갱신이 에너지 효율적으로 이루어질 수 있음을 보인다.

• Journal of Communications and Networks
• /
• 제9권4호
• /
• pp.408-418
• /
• 2007

In this paper, we address the question of dynamic network provisioning for time-varying traffic rates, with the objective of maximizing the system throughput. We assume that the network is capable of providing bandwidth guaranteed traffic tunnels for an ingress-egress pair and present an approach that (1) updates the tunnel routes and (2) adjusts the tunnel bandwidths, in an incremental, adaptive manner, based on the variations in the incoming traffic. First, we consider a simpler scenario where tunnel routes are fixed, and present an approach for adjusting the tunnel bandwidths dynamically. We show, through simulations, that our dynamic bandwidth assignment algorithm significantly outperforms the optimal static bandwidth provisioning policy, and yields a performance close to that of the optimal dynamic bandwidth provisioning policy. We also propose an adaptive route update algorithm, which can be used in conjunction with our dynamic bandwidth assignment policy, and leads to further improvement in the overall system performance.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 가을 학술발표논문집 Vol.30 No.2 (2)
• /
• pp.352-354
• /
• 2003

기존의 SOFA(Software Appliances)형의 컴포넌트에서 DCUP(Dynamic Component UPdating)통해 컴포넌트 조립이 가능하다. 이에 대해 비동기적이고 동적 시스템에 적합한 패트리 넷을 이용하여 컴포넌트의 동적 업데이 시 기존 컴포넌트와의 상호작용과 각 인터페이스에 대한 프로세스의 흐름을 정형적으로 정의하고 설계상의 모호성을 줄일 수 있도록 하였으며 보다 나은 동적 업데이트의 최적화를 위한 기반을 제공한다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2007년도 한국컴퓨터종합학술대회논문집 Vol.34 No.1 (A)
• /
• pp.125-126
• /
• 2007

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2007년도 한국컴퓨터종합학술대회논문집 Vol.34 No.1 (A)
• /
• pp.244-245
• /
• 2007

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2007년도 가을 학술발표논문집 Vol.34 No.2 (A)
• /
• pp.233-234
• /
• 2007

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권5호
• /
• pp.1807-1824
• /
• 2015

As the technologies advance, mobile peer-to-peer (MP2P) networks or systems become one of the major ways to share resources and information. On such a system, the information retrieval (IR), including the development of scalable infrastructures for indexing, becomes more complicated due to a huge increase on the amount of information and rapid information change. To keep the systems on MP2P networks more reliable and consistent, the index structures need to be updated frequently. For a semantic IR system, the index structure is even more complicated than a classic IR system and generally has higher update cost. The most well-known indexing technique used in semantic IR systems is Latent Semantic Indexing (LSI), of which the index structure is generated by singular value decomposition (SVD). Although LSI performs well, updating the index structure is not easy and time consuming. In an MP2P environment, which is fully distributed and dynamic, the update becomes more challenging. In this work, we consider how to update the sematic index generated by LSI and keep the index consistent in the whole MP2P network. The proposed Concept Space Update (CSU) protocol, based on distributed 2-Phase locking strategy, can effectively achieve the objectives in terms of two measurements: coverage speed and update cost. Using the proposed effective synchronization mechanism with the efficient updates on the SVD, re-computing the whole index on the P2P overlay can be avoided and the consistency can be achieved. Simulated experiments are also performed to validate our analysis on the proposed CSU protocol. The experimental results indicate that CSU is effective on updating the concept space with LSI/SVD index structure in MP2P semantic IR systems.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.2852-2858
• /
• 2022

A proton therapy facility is under development at Huazhong University of Science and Technology (HUST). To meet the need for fast energy changes during treatments, a beamline control system (BCS) has been designed and implemented. The BCS coordinates and controls various beamline devices by adopting a distributed architecture divided into three layers: the client, server, and device layers. Among these, the design of the server layer is the key to realize fast energy changes. The server layer adopts the submodule programming paradigm and optimizes the data interface among modules, allowing the main workflow to be separated from the device workflow and data. Furthermore, this layer uses asynchronous, multithreaded, and thread-locking methods to improve the system's ability to operation efficiently and securely. Notably, to evaluate the changing energy status over time, a dynamic node update method is adopted, which can dynamically adjust the update frequency of variable nodes. This method not only meets the demand for fast updates on energy changes but also reduces the server's communication load in the steady state. This method is tested on a virtual platform, and the results are as expected.

• 한국정보통신학회논문지
• /
• 제15권6호
• /
• pp.1213-1220
• /
• 2011

본 논문에서는 분류자들 속에 중요도 정보를 삽입하여 동적 중요도 결정이 가능한 앙상블 시스템을 제안하였다. 그동안 앙상블 시스템에서 중요도는 훈련이 끝나고 결정된 중요도를 사용하였다. 한 번 결정된 중요도는 테스트 데이터에 상관없이 정적으로 사용되었다. 이 문제를 푸는 방법으로 관문 네트워크에서 구조적으로 계층을 두는 프로세스를 추가하여 동적 중요도 결정이 가능하게 하는 방법이 있지만 프로세스가 추가된다는 단점이 있다. 본 논문에서는 이런 추가적인 프로세스 없이 간단하게 동적 중요도 결정이 가능한 방법을 보여주고 구조적 변경 없이 기존의 시스템에 쉽게 적용할 수 있으며 AdaBoost보다 나은 성능을 보여주는 알고리즘을 제안한다.