• Journal of Electrical Engineering and Technology
• /
• 제10권6호
• /
• pp.2288-2296
• /
• 2015

This paper proposes a novel systematic modeling approach for an integrated single-stage power converter in order to predict its dynamic characteristics. The basic strategy of the proposed modeling is substituting the internal converters with an equivalent current source, and then deriving the dynamic equations under a standalone operation using the state-space averaging technique. The proposed approach provides an intuitive modeling solution and simplified mathematical process with accurate dynamic prediction. The simulation and experimental results by using an integrated boost-flyback converter prototype provide verification consistent with theoretical expectations.

• 한국항공우주학회지
• /
• 제33권11호
• /
• pp.57-64
• /
• 2005

화염면의 전파를 모사하는 -방정식에 기초한 DSGS 모델을 이용한 난류 예혼합 연소에 대한 LES 해석을 수행하였다. -방정식에 새롭게 도입된 DSGS 모델을 적용한 LES 지배방정식을 고찰한 후 후향계단을 갖는 복잡한 형상의 연소기 내의 난류 예혼합 연소 유동을 고찰하였다. 본 연구의 LES 해석은 재부착 위치, 평균속도 및 변동량, 그리고 온도와 같은 실험결과를 정확히 예측하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권2호
• /
• pp.175-185
• /
• 2017

This paper presents new differential methods for computing the combined and single dynamic stability derivatives of flight vehicle. Based on rigid dynamic mesh technique, the combined dynamic stability derivative can be achieved by imposing the aircraft pitching to the same angle of attack with two different pitching angular velocities and also translating it to the same additional angle of attack with two different rates of angle of attack. As a result, the acceleration derivative is identified. Moreover, the rotating reference frame is adopted to calculate the rotary derivatives when simulating the steady pull-up with different pitching angular velocities. Two configurations, the Hyper Ballistic Shape (HBS) and Finner missile model, are considered as evaluations and results of all the cases agree well with reference or experiment data. Compared to traditional ones, the new differential methods are of high efficiency and accuracy, and potential to be extended to the simulation of combined and single stability derivatives of directional and lateral.

• Transactions on Electrical and Electronic Materials
• /
• 제18권5호
• /
• pp.265-272
• /
• 2017

This paper presents the dynamic modeling, analysis, and control of an AC/DC/AC-assisted, self-excited induction generator connected to the grid. The dynamic model includes wind turbine models with pitch control, gear boxes, self-excited induction generators, excitation capacitance, inductive load models, controlled six-pulse rectifiers, and novel state-space models of a grid-connected inverter. The system has been simulated to verify its capabilities of buildup voltage, stator flux response, stator phase current, electromagnetic torque, and magnetizing inductance variation during both the dynamic and steady states with a variable-speed prime mover. The complete setup of the above dynamic models was simulated using MATLAB/SIMULINK.

• 한국항공우주학회지
• /
• 제40권3호
• /
• pp.209-214
• /
• 2012

최근 F-5 항공기 외부 연료탱크 수평 핀의 균열결함이 크게 증가함에 따라 원인 규명이 필요하다. 본 연구에서는 수평 핀의 동적거동을 유한요소법을 이용하여 피로해석 측면에서 정량적으로 평가하였다. 이를 위해 스피드 브레이크(speed brake)에 의한 동하중 이력을 적용하여 시간영역과 주파수영역의 피로해석을 수행하였다. 연구결과 수평 핀은 동적거동 영향으로 피로수명이 감소되었음을 입증하였다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2004년도 한국우주과학회보 제13권2호
• /
• pp.83-83
• /
• 2004

• Journal of Astronomy and Space Sciences
• /
• 제22권4호
• /
• pp.463-472
• /
• 2005

본 논문에서는 행성탐사선의 항행해 결정을 위한 동역학 모델을 개발에 대한 내용을 다뤘다. 탐사선이 우주공간을 항행할 때 받는 섭동력으로써, 지구의 비대칭 중력장, 지구의 극축운동, 태양과 달이외의 태양계 행성에 의한 중력, 태양의 의한 상대성효과, 태양복사압 그리고 지구 대기저항에 대한 동역학 모델을 구성하여, 특수섭동론인 코웰 방법에 의거한 탐사선의 궤적 전파기를 개발하였다. 힘 또는 가속도 항으로 표현되는 탐사선의 운동방정식은 아담스 코웰 11차 예측자-수정자 방법에 의해 수치 적분된다. 구성된 전파기를 이용하여 2003년 발사된 화성탐사선인 Mars Express의 실제 임무설계에 사용된 초기궤적요소를 기준으로 임무 궤적을 산출하여 각 섭동력의 영향을 비교해 보았다 이러한 비교는 항행해 결정 시스템의 구성 시 요구 정밀도에 따라 고려해야할 섭동력의 기준을 제시해 주기 때문이다. 또한, 개발된 동역학 모델의 성능시험을 위해 극성 최소 근접거리에서의 위치와 속도를 계산하여 화성 도착여부를 판단하였다. 모의실험을 통해 탐사선의 위치가 화성 작용권구 내에 도달하며 상대속도가 화성에 대한 탈출속도 미만이므로 화성에 포획됨을 확인하였으며, STK(Satellite Tool Kit)를 이용해 산출된 결과와 비교함으로써 본 연구결과가 행성탐사 임무지원에 적합함을 검증하였다.

• 천문학회지
• /
• 제54권2호
• /
• pp.61-70
• /
• 2021

We investigate 20 post-coronal mass ejection (CME) blobs formed in the post-CME current sheet (CS) that were observed by K-Cor on 2017 September 10. By visual inspection of the trajectories and projected speed variations of each blob, we find that all blobs except one show irregular "zigzag" trajectories resembling transverse oscillatory motions along the CS, and have at least one oscillatory pattern in their instantaneous radial speeds. Their oscillation periods are ranging from 30 to 91 s and their speed amplitudes from 128 to 902 km s-1. Among 19 blobs, 10 blobs have experienced at least two cycles of radial speed oscillations with different speed amplitudes and periods, while 9 blobs undergo one oscillation cycle. To examine whether or not the apparent speed oscillations can be explained by vortex shedding, we estimate the quantitative parameter of vortex shedding, the Strouhal number, by using the observed lateral widths, linear speeds, and oscillation periods of the blobs. We then compare our estimates with theoretical and experimental results from MHD simulations and fluid dynamic experiments. We find that the observed Strouhal numbers range from 0.2 to 2.1, consistent with those (0.15-3.0) from fluid dynamic experiments of bluff spheres, while they are higher than those (0.15-0.25) from MHD simulations of cylindrical shapes. We thus find that blobs formed in a post-CME CS undergo kinematic oscillations caused by fluid dynamic vortex shedding. The vortex shedding is driven by the interaction of the outward-moving blob having a bluff spherical shape with the background plasma in the post-CME CS.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권3호
• /
• pp.235-242
• /
• 2007

This paper discusses dynamic characteristics of a urea-SCR (Selective Catalytic Reduction) system. The urea flow rate to improve NOx conversion efficiency is generally determined by parameters such as catalyst temperature and space velocity. The urea-SCR system was tested in the various engine operating conditions governing the raw NOx emission levels, space velocity. and SCR catalyst temperature. These experiments include cold-transients to determine catalyst light-off temperature and urea flow rate transients. Likewise. ammonia storage dynamics was also investigated. The cold-transient results indicate the light-off temperature of the catalysts used in these experiments was $200-220^{\circ}C$. The ammonia storage and urea flow rate transients all indicate very slow dynamics (on the order of seconds) which presents control challenges for mobile applications. The results presented in this paper should provide an excellent starting point in developing a functional in-vehicle urea-SCR system.

• 한국해양공학회지
• /
• 제5권2호
• /
• pp.16-30
• /
• 1991

A numerical procedure is described for predicting the dynamic responses of combined systems of floating breakwaters and huge offshore structures supported by a large numer of the floating bodies in waves. The hydrodynamic interactins among tatal floating bodies are taken into account in their exact form within the context of linear potential theory. Wave control effects are discussed with both hydrodynamic interactions and hydrodynamic-structure interaction effects. The method presented is applicalbe to combined systems of floating breakwaters and huge structures for ocean space utilization for which a number of practical uses are seen in the future.