• Earthquakes and Structures
• /
• 제5권4호
• /
• pp.439-459
• /
• 2013

Main objective of the present study is to determine the statistical properties and suitable probability distribution functions of spectral displacements from nonlinear static and nonlinear dynamic analysis within the frame work of Monte Carlo simulation for typical low rise and high rise RC framed buildings located in zone III and zone V and designed as per Indian seismic codes. Probabilistic analysis of spectral displacement is useful for strength assessment and loss estimation. To the author's knowledge, no study is reported in literature on comparison of spectral displacement including the uncertainties in capacity and demand in Indian context. In the present study, uncertainties in capacity of the building is modeled by choosing cross sectional dimensions of beams and columns, density and compressive strength of concrete, yield strength and elastic modulus of steel and, live load as random variables. Uncertainty in demand is modeled by choosing peak ground acceleration (PGA) as a random variable. Nonlinear static analysis (NSA) and nonlinear dynamic analysis (NDA) are carried out for typical low rise and high rise reinforced concrete framed buildings using IDARC 2D computer program with the random sample input parameters. Statistical properties are obtained for spectral displacements corresponding to performance point from NSA and maximum absolute roof displacement from NDA and suitable probability distribution functions viz., normal, Weibull, lognormal are examined for goodness-of-fit. From the hypothesis test for goodness-of-fit, lognormal function is found to be suitable to represent the statistical variation of spectral displacement obtained from NSA and NDA.

• 한국해양공학회지
• /
• 제30권4호
• /
• pp.260-267
• /
• 2016

Considering the effect of dynamic response amplification, a reliability analysis of an offshore wind turbine support structure under an earthquake is presented. A reliability analysis based on the dynamic response requires a large amount of time when using not only a level 3 approach but also level 2 such as a first order reliability method (FORM). Moreover, if a limit state is defined by using the maximum stress at a structural joint where stress concentration occurs, a three-dimensional element should be used in the finite element analysis. This makes the computational load much heavier. To deal with this kind of problem, two techniques are suggested in this paper. One is the application of a quasi-static structural analysis that takes the dynamic amplification effect into account. The other is the use of a stress concentration factor to estimate the maximum local stress. The proposed reliability analysis is performed using a level 2 FORM and verified using a level 3 simulation approach.

• Earthquakes and Structures
• /
• 제11권4호
• /
• pp.583-607
• /
• 2016

One of the main applications of seismic risk assessment is that an specific design could be selected for a bridge from different alternatives by considering damage losses alongside primary construction costs. Therefore, in this paper, the focus is on selecting the shape of pylon, which is a changeable component in the design of a cable-stayed bridge, as a double criterion decision-making problem. Different shapes of pylons include H, A, Y, and diamond shape, and the two criterion are construction costs and probable earthquake losses. In this research, decision-making is performed by using developed seismic risk assessment process as a powerful method. Considering the existing uncertainties in seismic risk assessment process, the combined incremental dynamic analysis (IDA) and uniform design (UD) based fragility assessment method is proposed, in which the UD method is utilized to provide the logical capacity models of the structure, and the IDA method is employed to give the probabilistic seismic demand model of structure. Using the aforementioned models and by defining damage states, the fragility curves of the bridge system are obtained for the different pylon shapes usage. Finally, by combining the fragility curves with damage losses and implementing the proposed cost-loss-benefit (CLB) method, the seismic risk assessment process is developed with financial-comparative approach. Thus, the optimal shape of the pylon can be determined using double criterion decision-making. The final results of decision-making study indicate that the optimal pylon shapes for the studied span of cable-stayed bridge are, respectively, H shape, diamond shape, Y shape, and A shape.

• 콘크리트학회논문집
• /
• 제28권2호
• /
• pp.187-196
• /
• 2016

KBC2009에 의하면 특수전단벽과 연결되는 폭이 좁고 춤이 높은 연결보는 대각선 다발철근 보강을 실시해야 한다. 그러나 대각선 다발 철근의 사용은 시공성과 경제성에 부정적인 영향을 미칠 것으로 예상된다. 이에 본 연구에서는 4개의 서로 다른 상세를 갖는 연결보를 대상으로 주기하중 재하 실험을 실시하여 각각의 성능을 평가하였다. 또한 그 실험결과를 바탕으로 하여 특수전단벽과 연결보로 이루어진 병렬전단벽 구조시스템을 구성하여 FEMA P695에 따른 방법론으로 내진성능평가를 실시하였다.

• Earthquakes and Structures
• /
• 제13권3호
• /
• pp.267-277
• /
• 2017

Base-isolation is now being adopted as a retrofitting strategy to improve seismic behaviour of reinforced concrete (r.c.) framed structures subjected to far-fault earthquakes. However, the increase in deformability of a base-isolated framed building may lead to amplification in the structural response under the long-duration horizontal pulses of high-magnitude near-fault earthquakes, which can become critical once the strength level of a fire-weakened r.c. superstructure is reduced. The aim of the present work is to investigate the nonlinear seismic response of fire-damaged r.c. framed structures retrofitted by base-isolation. For this purpose, a five-storey r.c. framed building primarily designed (as fixed-base) in compliance with a former Italian seismic code for a medium-risk zone, is to be retrofitted by the insertion of elastomeric bearings to meet the requirements of the current Italian code in a high-risk seismic zone. The nonlinear seismic response of the original (fixed-base) and retrofitted (base-isolated) test structures in a no fire situation are compared with those in the event of fire in the superstructure, where parametric temperature-time curves are defined at the first level, the first two and the upper levels. A lumped plasticity model describes the inelastic behaviour of the fire-damaged r.c. frame members, while a nonlinear force-displacement law is adopted for the elastomeric bearings. The average root-mean-square deviation of the observed spectrum from the target design spectrum together with a suitable intensity measure are chosen to select and scale near- and far-fault earthquakes on the basis of the design hypotheses adopted.

• Steel and Composite Structures
• /
• 제28권3호
• /
• pp.289-308
• /
• 2018

Numerous urban seismic vulnerability studies have recognized pounding as one of the main risks due to the restricted separation distance between neighboring structures. The pounding effects on the adjacent buildings could extend from slight non-structural to serious structural damage that could even head to a total collapse of buildings. Therefore, an assessment of the seismic pounding hazard to the adjacent buildings is superficial in future building code calibrations. Thus, this study targets are to draw useful recommendations and set up guidelines for potential pounding damage evaluation for code calibration through a numerical simulation approach for the evaluation of the pounding risks on adjacent buildings. A numerical simulation is formulated to estimate the seismic pounding effects on the seismic response demands of adjacent buildings for different design parameters that include: number of stories, separation distances; alignment configurations, and then compared with nominal model without pounding. Based on the obtained results, it has been concluded that the severity of the pounding effects depends on the dynamic characteristics of the adjacent buildings and the input excitation characteristics, and whether the building is exposed to one or two-sided impacts. Seismic pounding among adjacent buildings produces greater acceleration and shear force response demands at different story levels compared to the no pounding case response demands.

• 한국지진공학회논문집
• /
• 제8권3호
• /
• pp.97-103
• /
• 2004

철골 중심가새골조의 경우 접합비용의 절감을 위해 가새가 설치된 스팬을 제외한 기둥들은 통상 중력기둥으로 설계된다. 따라서 중력기둥이 미치는 P-${\Delta}$ 효과를 내진성능 평가에 적절히 반영할 필요가 있다. 본 연구에서는 철골 중심가새골조의 중력기둥이 유발하는 P-${\Delta}$ 효과를 가상의 의지기둥(leaning column) 개념에 의해 간편하게 모델링할 수 있는 해석기법을 예시하였다. 역V형 가새골조를 사례로 하여 FEMA 273의 비선형정적해석법에 의한 내진성능평가를 수행하고 동적 P-Δ 증폭계수 적용에 있어서의 문제점을 지적하였다. 본 연구의 결과에 의할 때 P-${\Delta}$ 효과는 중심가새골조의 내진성능평가에 무시할 수 없는 영향이 있는 것으로 밝혀졌다. 아울러 기존연구에서 제시된 인장보강재에 의한 역V형 가새골조의 보강법은 내진성능향상에 매우 효과적임을 확인하였다.

• 한국지진공학회논문집
• /
• 제23권3호
• /
• pp.159-167
• /
• 2019

2016 Gyeongju and 2017 Pohang earthquakes led Koreans to acknowledge that the Korean peninsula is not an earthquake-free zone anymore. Among various buildings crucial to after-shock recovery, general hospital buildings, especially existing old ones, are very significant so seismic retrofitting of those must be an important issue. Self-centering energy dissipative(SCED) brace is one of retrofitting methods, which consists of tendon with restoring force and friction device capable of dissipating seismic energy. The strength of the SCED brace is that the tendon forces a structure to go back to the original position, which means residual drift can be negligible. The residual drift is a very important parameter to determine usableness of general hospitals after shock. To the contrary, buckling-restrained braces(BRB) are also a very effective way to retrofit because they can resist both compressive and tensile, but residual drift may exist when the steel core yields. On this background, the seismic retrofitting effect of general hospitals reinforced with SCED braces was investigated and compared to that of the BRD in this study. As a result, although the floor acceleration cannot be reduced, the story drift and residual drift, and the shear demand of walls significantly decreased. Consequently, seismic retrofitting by SCED braces are very effective for domestic low-rise general hospitals.

• Computers and Concrete
• /
• 제27권2호
• /
• pp.163-173
• /
• 2021

In this paper, the parameters of haunch height, reinforcement ratio and site condition were evaluated for the influence on the seismic performance of a composite precast fabricated utility tunnel by shaking table test and numerical simulation. The dynamic response laws of acceleration, interlayer displacement and steel strain under unidirectional horizontal seismic excitation were analyzed through four specimens with a similarity ratio of 1:6 in the test. And a numerical model was established and analyzed by the finite element software ABAQUS based on the structure of utility tunnel. The results indicated that composite precast fabricated utility tunnel with the good anti-seismic performance. In a certain range, increasing the height of haunch or the ratio of reinforcement could reduce the influence of seismic wave on the utility tunnel structure, which was beneficial to the structure earthquake resistance. The clay field containing the interlayer of liquefied sandy soil has a certain damping effect on the structure of the utility tunnel, and the displacement response could be reduced by 14.1%. Under the excitation of strong earthquake, the reinforcement strain at the side wall upper end and haunches of the utility tunnel was the biggest, which is the key part of the structure. The experimental results were in good agreement with the fitting results, and the results could provide a reference value for the anti-seismic design and application of composite precast fabricated utility tunnel.

• 한국지반공학회논문집
• /
• 제36권6호
• /
• pp.17-34
• /
• 2020

일반적으로 잔교식 구조물의 내진설계를 위한 응답스펙트럼 해석 시 기준서들에서는 지진응답해석을 통해 증폭된 가속도를 입력가속도 활용하도록 제시하고 있으나, 기준서에 따라 방법이 상이하여 설계 시 혼란을 야기할 수 있다. 이에, 본 연구에서는 동적원심모형실험을 통해 지반 내 다양한 깊이에서 지반 가속도를 산정하였으며, 산정된 지반가 속도를 활용하여 응답스펙트럼 해석을 수행하였다. 이후 실험 및 해석을 통해 도출된 잔교식 안벽 구조물의 모멘트 결과를 비교하였으며, 응답스펙트럼 해석 시 적절한 입력지반가속도를 결정하기 위한 방법을 제시하고자 하였다. 실험 및 해석을 비교한 결과, 탄성 지반 스프링을 적용하는 경우 구조물의 고유주기를 가장 적절하게 모사하는 것으로 나타났으며, 상부 지표면에서 증폭된 지진파를 입력가속도로 활용하는 것이 사질토 지반에 관입된 구조물 응답을 가장 합리적으로 모사하는 것으로 나타났다.