• 제목/요약/키워드: dynamic seismic analysis

검색결과 1,388건 처리시간 0.026초

사면에서 발생하는 액상화 수치해석 (Numerical Modeling of Soil Liquefaction at Slope Site)

  • 박성식
    • 한국지반환경공학회 논문집
    • /
    • 제7권6호
    • /
    • pp.133-143
    • /
    • 2006
  • 본 논문에서는 저자가 제안한 유효응력모델을 이용하여 지진시 사면의 동적거동에 관한 수치해석을 수행하였다. 항복함수는 동일한 응력비를 가진 무한개의 방사선을 의미하며, 비관련 유동규칙을 가진 탄소성모델인 UBCSAND를 이용하였다. 이 모델은 FLAC내에 내장된 Mohr-Coulomb모델을 변형한 형태이다. UBCSAND모델을 이용하여 RPI에서 수행한 원심모형실험결과를 예측하였다. 먼저, UBCSAND모델을 Nevada모래를 사용한 반복 직접단순전단시험결과를 이용하여 검증하였으며, 액상화전후의 거동을 예측하였다. 이와 같이 검증된 모델을 원심모형실험에서 계측된 가속도, 과잉간극 수압, 변위와 서로 비교하였다. 일반적으로 계측치와 예측치가 일치하였다. 유효응력모델을 이용한 동적 수치해석기법은 서부 캐나다에서 댐, 교량, 터널, 파이프라인과 관련된 액상화 프로젝트에 실제 사용되고 있다.

  • PDF

원통형 액체저장 강탱크의 내진설계기준 (Earthquake Resistant Design Critieria for Cylindrical Liquid-Storage Steel tanks)

  • 국승규;이진호
    • 한국지진공학회논문집
    • /
    • 제3권2호
    • /
    • pp.19-28
    • /
    • 1999
  • 건물과 교량의 내진설계기준 제정작업이 활발하게 진행되고 있는 반면 탱크구조물에 대한 내진설계기준 제정작업은 아직 초기단계에 머무르고 있는 실정이다 탱크구조물이 지진에 의해 붕괴되는 경우 탱크자체의 파손 및 저장물의 손실에 의한 직접피해보다 저장물의 유출에 의한 피해파급이 더욱 심각한 상황을 초래할 수 있다 따라서 탱크구조물의 내진설계기준에는 탱크구조물의 동적 거동에 대한 해석 및 검토방법은 물론 이러한 피해파급을 최소할 수 잇는 조치가 포함되어야 한다 이논문에서는 원통형 액체저장 강탱크에 대한 내진설계기준의 제정에 필수적으로 고려해야 하는 설계개념과 원칙 해석방법 검토사항 및 피해파급 차단초치를 제시하였다.

  • PDF

Instrumentation and system identification of a typical school building in Istanbul

  • Bakir, Pelin Gundes
    • Structural Engineering and Mechanics
    • /
    • 제43권2호
    • /
    • pp.179-197
    • /
    • 2012
  • This study presents the findings of the structural health monitoring and the real time system identification of one of the first large scale building instrumentations in Turkey for earthquake safety. Within this context, a thorough review of steps in the instrumentation, monitoring is presented and seismic performance evaluation of structures using both nonlinear pushover and nonlinear dynamic time history analysis is carried out. The sensor locations are determined using the optimal sensor placement techniques used in NASA for on orbit modal identification of large space structures. System identification is carried out via the stochastic subspace technique. The results of the study show that under ambient vibrations, stocky buildings can be substantially stiffer than what is predicted by the finite element models due to the presence of a large number of partitioning walls. However, in a severe earthquake, it will not be safe to rely on this resistance due to the fact that once the partitioning walls crack, the bare frame contributes to the lateral stiffness of the building alone. Consequently, the periods obtained from system identification will be closer to those obtained from the FE analysis. A technique to control the validity of the proportional damping assumption is employed that checks the presence of phase difference in displacements of different stories obtained from band pass filtered records and it is confirmed that the "proportional damping assumption" is valid for this structure. Two different techniques are implemented for identifying the influence of the soil structure interaction. The first technique uses the transfer function between the roof and the basement in both directions. The second technique uses a pre-whitening filter on the data obtained from both the basement and the roof. Subsequently the impulse response function is computed from the scaled cross correlation between the input and the output. The overall results showed that the structure will satisfy the life safety performance level in a future earthquake but some soil structure interaction effects should be expected in the North South direction.

유전자 알고리즘을 이용한 모드기반 교량의 해석모델개선 (Modal based Structural Model Modification Using Genetic Algorithm)

  • 윤정방;이종재;이정석;전귀현;이진학
    • 한국전산구조공학회논문집
    • /
    • 제17권4호
    • /
    • pp.389-403
    • /
    • 2004
  • 이 연구에서는 교량의 모드자료를 이용한 구조해석모델의 개선에 관하여 연구하였다. 교량의 초기해석모델은 도면 및 현장조사결과를 바탕으로 작성되므로, 시간에 따라 손실된 강성의 영향 및 경계조건 등을 합리적으로 반영하기 어려우며, 따라서 구조물에 대한 정적 혹은 동적실험을 수행하고, 그 결과를 반영하여 해석모델을 개선하는 것이 바람직하다. 이 연구에서는 구조물의 고유주파수 및 모드형상 등의 모드특성을 바탕으로 추계론적 최적화 기법인 유전자 알고리즘을 이용하여 해석모델을 개선하고자 하였다. 임진강교 및 행주대교에 대한 동적실험 자료를 이용하여 교량의 모드특성을 추정하였으며, 추정된 모드특성을 바탕으로 유전자 알고리즘을 이용하여 수치해석모델을 개선하였다. 개선된 모델을 사용하여 해석한 결과, 초기해석모델에 의한 해석결과보다 실험으로 추정한 모드특성에 가까움을 확인하였고, 이로부터 개선모델의 합리성을 검증하였다.

이산폰툰형 부유식교량의 지진응답해석 (Seismic Response Analysis of a Floating Bridge with Discrete Pontoons)

  • 권장섭
    • 한국지진공학회논문집
    • /
    • 제9권2호통권42호
    • /
    • pp.47-58
    • /
    • 2005
  • 이산폰툰형 부유식교량의 시간영역 지진응답해석을 지진파의 공간분포를 고려하여 수행하였다. 지반운동의 공간변화는 파의 통과 영향, 엇결성 뎡향 및 국부지반 영향을 반영하는 결맞음 함수 모델로 고려하였다. 부유식 교량의 상부구조는 공간뼈대요소와 탄성현수케이블요소를 이용하여 모델링 하였고, FHWA 가이드라인의 스프링 모델을 사용하여 교대의 지반 구조물 상호작용에 대한 영향을 고려하엿으며, 경계요소법으로 산정한 폰툰 동수력계수의 주파수 의종성을 고려하기 위해서 시간지연함수를 사용하였다. 지반운동의 공간변화를 고려한 다중지점 지진입력을 교량의 양단에 도입하였고 응답의 시간이력을 동시 가진 시와 비교하였다. 장주기의 동적특성을 갖는 이산폰툰형 부유식 교량의 지진응답 해석에서 지반운동의 공간분포를 고려할 경우에 주몰할만한 응답의 증폭이 나타날 수 있음을 확인하였다.

발파실험과 내진해석을 통한 Anchor의 동적 저항성에 관한 연구 (Dynamic Resistance of Anchor using Blasting Test and Numerical analysis for Earthquake)

  • 최경집;조국환
    • 한국철도학회논문집
    • /
    • 제20권4호
    • /
    • pp.500-511
    • /
    • 2017
  • 최근 경주지진이 일어나게 되면서 지진의 진동에 의한 구조물의 안정성에 대한 관심이 증가하고 있다. 하지만 국내 앵커분야의 경우 설계하중에 대한 안정성만 고려하고 있을 뿐 진동에 대한 안정성에 대한 연구는 미미한 실정이다. 마찰형 앵커의 경우 시공 중 발생하는 발파진동 등으로 인하여 앵커의 저항능력을 상실한 경우가 종종 보고되고 있다. 이에 반하여 지압형 앵커의 경우 구조적으로 마찰형 앵커에 비하여 진동저항능력이 우수할 것으로 판단되나 이러한 특성에 대한 연구는 거의 진행되지 않았다. 본 연구에서는 새롭게 개발한 지압형 앵커의 발파진동과 지진에 대한 안정성을 검증하기 위하여 현장시험을 수행하였으며 수치해석을 통하여 내진안정성을 검증하였다. 그 결과 현장시험의 경우에는 마찰형 앵커보다 발파진동에 대한 저항성능이 우수하였으며, 수치해석을 이용한 내진해석의 경우 또한 마찰형 앵커에 비하여 저항성능이 우수한 것으로 분석되었다.

Computational analysis of three dimensional steel frame structures through different stiffening members

  • Alaskar, Abdulaziz;Wakil, Karzan;Alyousef, Rayed;Jermsittiparsert, Kittisak;Ho, Lanh Si;Alabduljabbar, Hisham;Alrshoudi, Fahed;Mohamed, Abdeliazim Mustafa
    • Steel and Composite Structures
    • /
    • 제35권2호
    • /
    • pp.187-197
    • /
    • 2020
  • Ground motion records are commonly used for fragility curves (FCs) developing utilized in seismic loss estimating analysis for earthquake prone zones. These records could be 'real', say the recorded acceleration time series or 'simulated' records consistent with the regional seismicity and produced by use of alternative simulation methods. This study has focused on fragility curves developing for masonry buildings through computational 'simulated' ground motion records while evaluating the properness of these fragilities compared to the curves generated by the use of 'real' records. Assessing the dynamic responses of structures, nonlinear computational time history analyses through the equivalent single degree of freedom systems have been implemented on OpenSees platform. Accordingly, computational structural analyses of multi-story 3D frame structures with different stiffening members considering soil interaction have been carried out with finite element software according to (1992) Earthquake East-West component. The obtained results have been compared to each frame regarding soil interaction. Conclusion and recommendations with the discuss of obtaining findings are presented.

Development of Modified Flexibility Ratio - Racking Ratio Relationship of Box Tunnels Subjected to Earthquake Loading Considering Rocking

  • Duhee Park;Van-Quang Nguyen;Gyuphil Lee;Youngsuk Lee
    • 한국지반환경공학회 논문집
    • /
    • 제24권2호
    • /
    • pp.13-24
    • /
    • 2023
  • Tunnels may undergo a larger or a smaller response compared with the free-field soil. In the pseudo-static procedure, the response of the tunnel is most often characterized by a curve that relates the racking ratio (R) with the flexibility ratio (F), where R represents the ratio of the tunnel response with respect to the free-field vibration and F is the relative stiffness of the tunnel and the surrounding soil. A set of analytical and empirical curves that do not account for the depth and the aspect ratio of the tunnel are typically used in practice. In this study, a series of dynamic analyses are conducted to develop a set of F-Rm relations for use in a frame analysis method. Rm is defined as an adjusted R where the rocking mode of deformation is removed and only the racking deformation is extracted. The numerical model is validated against centrifuge test recordings. The influence of aspect ratio, buried depth of tunnel on results is investigated. The results show that Rm increases with the increase of the buried depth and the aspect ratio. The widely used F-R relations are highlighted to be different compared with the obtained results in this study. Therefore, the updated F-Rm relations with proposed equations are recommended to be used in practice design. The rocking response decreases with either the decrease of the difference of stiffness between surrounding soil and tunnel or the larger aspect ratio of the tunnel section.

동적 원심모형실험에 의한 점성토 지반에 근입된 말뚝지지 기초의 응답 스펙트럼 분석 (Assessment of Response Spectrum by Dynamic Centrifuge Test for the Pile Foundation into the Clay)

  • 김상연;박종배;박용부;김동수
    • 토지주택연구
    • /
    • 제5권2호
    • /
    • pp.115-120
    • /
    • 2014
  • 현재 국내 내진설계기준에서 제시하고 있는 지반분류 방법 및 지반 증폭계수는 기반암이 주로 30m 이내에 위치하는 일반적인 국내 지반특성을 제대로 반영하지 못하고 있다. 따라서, 본 연구에서는 점성토 지반에 근입된 비정형 말뚝기초(PHC 500, 중심 간격 3D)에 대한 동적 원심모형 실험을 실시하여 자유장과 기초판의 응답 스펙트럼 결과를 비교하였다. 장주기 영역에서는 SE 지반의 설계 스펙트럼 가속도보다 기초와 자유장에서 계측된 실제 스펙트럼 가속도가 작게 나타났고, 기초에서 발생한 스펙트럼 가속도는 지진 하중이 커지면 SD 지반의 설계 스펙트럼 가속도와 유사해지는 것을 확인할 수 있었다. 이것은 연약한 지반(SE 지반)에 대한 현행 설계기준이 지진 하중을 과대평가하고 있으며 비경제적 설계를 할 수 있음을 의미한다. 1.5초 이상의 장주기 영역에서는 실험에서 측정된 스펙트럼 가속도가 SC 지반의 표준설계응답스펙트럼 가속도보다 작게 나타났고 기초 및 자유장 조건에 의한 스펙트럼 가속도 차이가 거의 발생하지 않았다. 따라서, 실제 아파트에 해당하는 1.5초 이상의 장주기에서는 국내 지반조건을 고려하여 실험에서 측정된 스펙트럼 가속도를 설계에 적용하면 표준설계스펙트럼을 적용할 때 보다 경제적인 설계가 가능한 것으로 나타났다.

조립재료의 입도특성에 따른 동적 변형특성 평가 (Dynamic Deformation Properties of Coarse Granular Materials with Respect to Gradation Characteristics)

  • 하익수;김남룡
    • 한국지반공학회논문집
    • /
    • 제29권8호
    • /
    • pp.5-14
    • /
    • 2013
  • 굵은 자갈 이상의 대입경 입자를 포함하는 조립질 지반재료는 댐, 제방, 철도 등 대형 지반구조물의 성토 및 채움재료로 널리 사용되며, 이러한 구조물의 동적 해석을 위해서는 축조재료의 변형특성에 대한 엄밀한 평가가 필수적이다. 본 연구에서는 대입경 조립재료의 동적 변형특성 평가를 위하여 지름 200mm, 높이 400mm의 공시체에 대한 시험이 가능하도록 개발된 대형 공진주시험기를 활용하여 댐 축조용 사력재의 최대전단탄성계수, 전단탄성계수감소곡선 및 감쇠비를 평가하였으며, 재료의 최대입경과 균등계수와 같은 입도분포특성이 재료의 변형특성에 미치는 영향을 확인하였다. 재료의 입경이 동적 변형특성에 미치는 영향을 평가한 결과, 동일한 균등계수에서 평균입경의 범위에 따른 전단탄성계수감소곡선에 차이가 발생함을 확인하였다. 동일한 최대입경에 대하여 균등계수를 달리하는 경우 균등계수에 따라 최대전단탄성계수의 구속압 영향계수가 증가함을 확인하였다. 결과적으로 조립재료의 입도 특성 중 최대입경은 전단탄성계수감소곡선을, 균등계수는 미소변형영역의 구속압 영향계수에 대한 영향요소임을 확인하였으며, 조립재료의 동적 변형특성을 엄밀히 평가하기 위한 대형 공진주시험기의 효용성을 확인하였다.