• Smart Structures and Systems
• /
• 제21권4호
• /
• pp.449-467
• /
• 2018

In this paper, a theoretical and numerical study on bridge simultaneous damage detection procedure for identifying both the system parameters and input excitation mass, are presented. This method is called 'Adjoint Variable Method' which is an iterative gradient-based model updating method based on the dynamic response sensitivity. The main advantage of proposed method is inclusion of an analytical method to augment the accuracy and speed of the solution. Moving mass is a model which takes into account the inertia effects of the vehicle. This interaction model is a time varying system and proposed method is capable of detecting damage in this variable system. Robustness of proposed method is illustrated by correctly detection of the location and extension of predetermined single, multiple and random damages in all ranges of speed and mass ratio of moving vehicle. A comparison study of common sensitivity and proposed method confirms its efficiency and performance improvement in sensitivity-based damage detection methods. Various sources of errors including the effects of measurement noise and initial assumption error in stability of method are also discussed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권4호
• /
• pp.204-211
• /
• 2011

고속철 교량의 동적응답을 보다 정밀하게 해석하기 위한 동적해석방법을 개발하였다. 차후 증가될 초고속(450km/h)을 포함하여 고속 주행하는 KTX 동력차에 의한 교량의 동적거동을 면밀한 속도변수분석과 정밀한 해석을 위한 고속철, 교량 그리고 궤도구조물의 상호작용을 포함한 수치모델을 구성하였다. 네 가지 40~25미터 단순지간의 PSC 박스교를 3차원 유한 프레임요소 모델로 개발하였다. 스펙트럼밀도함수로 산출된 궤도불규칙값과 궤도간 상이한 거리차이를 수치모델화 하였다. 고속철차량은 (KTX) 38자유도로 구성하였다. 38자유도 모델은 3방향 변위와 상응하는 회전각을 고려하였다. 동적증폭계수는 다양한 불규칙 궤도, 켐버, 주행속도, 자갈도상과 같은 주행조건에 의해 결정된다. 이와 같은 동적증폭계수를 해석하기위한 Newmark-${\beta}$ 기법과 Runge-Kutta기법을 적용하여 고속철 속도별과 경간별로 면밀하게 비교 분석하였다.

• 대한토목학회논문집
• /
• 제28권3A호
• /
• pp.305-313
• /
• 2008

본 연구에서는 교량의 노면조도 및 교량과 차량 사이의 상호작용을 고려한 수치해석방법을 사용하여 구한 도로교의 동적하중허용계수(DLA)를 LRFD 형식으로 신뢰도이론의 2차 모멘트법을 적용하여 보정하였다. 대상교량은 건설교통부에서 제정한 "도로교 상부구조 표준도"에 수록되어 있는 단순 PSC빔교와 단순 강판형교, 그리고 LRFD로 설계된 개구제형 단면을 갖는 강박스형교를 사용하고, "보통의 도로"에 대하여 생성시킨 10개의 노면조도를 사용하였다. 차량은 5축 트랙터-트레일러인 표준트럭(DB-24)을 3차원 차량모델로 모델링하고, 교량은 주형을 보요소로, 콘크리트 바닥판은 쉘요소로 이상화시켰으며 주형과 콘크리트 바닥판 사이는 Rigid Link를 사용하여 3차원으로 모델링하였다. 3가지 형식에 대한 10개의 교량에 각각 10개의 노면조도를 사용하여 해석적 방법으로 구한 100개의 해석결과와 OHBDC에서 사용한 보정 식을 사용하여 PSC빔교, 강판형교, 강박스형교 및 전체 대상교량에 대한 LRFD 형식의 DLA를 통계적으로 추정하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1102-1107
• /
• 2004

High-speed railway bridges subject to effect of statical loads by temperature change as well as dynamic loads by interaction between vehicle load which run specially fast and behavior of bridges, If suitable longitudinal expansion by temperature change of bridge does not happened, it can cause unhealthy condition for the parts of bridges as well as can generate addition stress to bridges, For these reason, Analysis and Estimation of data about behavior of bridges occupies important factor in that estimate the remaining life of bridges and select the maintenance, repair and retrofit. In this paper, Analysis for the long-term behavior of bridges using Longitudinal displacement and Temperature data that is actuality measured data to the bridges of Seoul-Busan high speed railroad test section has been made.

• 한국안전학회지
• /
• 제32권5호
• /
• pp.41-46
• /
• 2017

The coefficient of derailment and the rate of wheel load reduction were used as the index of train running safety that was directly affected the train derailment safety. In aspects of track, the train running safety depends on the complex interaction between wheel and rail, and the track-vehicle conditions (i.e., the curvature, cant, track system, vehicle speed and the operation conditions, etc). In this study, the relationship between the train running safety and the track curvature and vehicle speed for direct fixation concrete tracks currently employed in Korean light rapid transit was assessed by performing field tests using actual vehicles running along the service lines. The measured dynamic wheel load, lateral wheel load and lateral displacement of rail head were measured for same train running on four tested tracks under real conditions, which included curved and tangent tracks placed on the tunnel and bridge, thus increasing the train speed by approximately maximum design speed of each test site. Therefore, the measured dynamic track response was applied to the running safety analysis in order to evaluate the coefficient of derailment, the rate of wheel load reduction and the track gauge widening at each test site, and compare with the corresponding Korean train running safety standard. As the results, the lateral track response of direct fixation concrete track appeared to increase with the decreased track curvature; therefore, it was inferred that the track curvature directly affected the train running safety.