• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.1
• /
• pp.10-17
• /
• 2007

For the purpose of optimal control of anti-lock brake system, precise dynamic characteristics analysis of the hydraulic modulator, especially solenoid valve is necessary. However, most of researches so law have dealt with dynamic characteristic analysis of valve itself and the results have been restrictive to apply on the actual ABS modulator, where hydraulic pressure is acting. In this study, mathematical modeling and experimental analysis were executed in order to evaluate the valve dynamic characteristics when the hydraulic pressure applied. High pressure on the master cylinder effects on the valve dynamic characteristics have been analyzed quantitatively and performance improvement methods have been suggested varying the design factor. Consequently, results of solenoid valve dynamic characteristics analysis derived in the study can be utilized criteria for the optimal control of anti-lock brake system.

• International journal of advanced smart convergence
• /
• v.11 no.3
• /
• pp.197-205
• /
• 2022

In order to investigate the effect of an 8-week elastic band exercise program according to age on the isokinetic strength and dynamic equilibrium of the knee, 10 women under 49 years old and 10 women over 50 years old were selected. Dynamic equilibrium was measured through Y-Balance test one week before the exercise program, and power and endurance were confirmed by measuring isokinetic muscle strength of the knee. After measurement, small tool exercise was performed for 8 weeks. After 8 weeks of exercise, isokinetic muscle strength and dynamic equilibrium were measured. As a result, isokinetic muscle strength, which checks muscle strength and muscular endurance, increased after measurement than before measurement regardless of age, and dynamic equilibrium increased after measurement rather than before measurement, and the group under 49 years of age was higher than the group over 50 years old. We think that small tool exercise improves isokinetic muscle strength and is effective in neuromuscular development, improving dynamic stability ability, which is an important factor in preventing falls.

• Physical Therapy Rehabilitation Science
• /
• v.13 no.2
• /
• pp.240-249
• /
• 2024

Objective: The objective of this study is to evaluate various research that have examined dynamic knee valgus and to pinpoint a straightforward, clinically practical 2D assessment method for dynamic knee valgus that is user-friendly. Design: A literature review Methods: This literature review was conducted in Pubmed, MEDLINE^® and Google Scholar with the following key words: Knee valgus angle, Knee valgus evaluation, Knee valgus assessment, Dynamic knee valgus. After removing duplicate studies, 53 articles were initially chosen using this method, with 17 studies ultimately meeting the selection criteria. Results: Based on the comprehensive review of various studies, the Single Leg Squat (SLS) was identified as the most popular test method, followed by the Single Leg Landing (SLL) as the next most common test method. The Frontal Plane Projection Angle (FPPA) method was the most representative method for measuring dynamic knee valgus (DKV) during these tests. SLS was found in a total of 10 studies, while SLL was found in 7 studies. Conclusions: The most commonly proposed test for assessing DKV is measuring the SLS using the FPPA method. However, when applied to individuals without knee pathology, the discriminative power of this method may be limited. This suggests the need for further research to explore alternative methods for assessing DKV in this population.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.2
• /
• pp.73-79
• /
• 1999

Most of mechanical structures are combined of substructures such as beams and/or plates. There are few systems with unibody structures but are many systems with united body structures. Generally the dynamic a nalysis of whole structures is performed under alternation load. In the structure design, the analysis of each bolted joint is more important than others for zero severity. This paper presents the analysis method of contact stress distribution factor in the bolted joint with variable fastening torque on joints in the structure. At first, a static vibration test was performed to find out a nominal stress of bolt jointed plates from the relationship between natural frequency and nominal stress. Then a contact stress was computed at contact point between bolt and plate in the structure. It is believed that the proposed method has promisiong implications for safer design with index of contact stress distribution factor and has merits for cost-down and saving time at the beginning of vehicle development.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.11 s.116
• /
• pp.1132-1139
• /
• 2006

Non-contact underwater explosions against surface ship could cause extensive equipment damage during wartime service. Thus, the need to develop methods for the design of shock resistant equipment structures and systems was strongly established. In analytical methods, DDAM(Dynamic Design and Analysis Method) and transient repsonse method are used for ship shock design. In this paper, to analyze the characteristics of DDAM, medium weight shock test, DDAM and transient response analysis for missile system equipment are performed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.169-173
• /
• 2005

In this paper, a comparative study of modified phase-angle, extinction-angle, and pulse width modulation control techniques for the purpose of power factor improvement of single-phase AC-AC voltage regulators have been illustrated as applied to a single-phase ac voltage converter by an example of the widely used single-phase induction motor as a dynamic load. Observations on power factor, displacement factor and total harmonic distortion factor are described and discussed on the basis of the simulated and measured results of this work.

• East Asian Economic Review
• /
• v.17 no.2
• /
• pp.103-128
• /
• 2013

This paper analyzes the dynamics and nature of regional business cycle synchronization for East Asian countries in the period of 2000:Q1-2011:Q4. Estimating a dynamic two-factor model extracts the common factor and the nation-specific factor from both the macroeconomic aggregates and plausible driving forces of regional business cycles. Evidence for regional business cycle synchronization is particularly strong for Korea, Malaysia and the Philippines, while Japan shows weak evidence of regional synchronization. On the other hand, Indonesia, Thailand, Singapore and China are decoupling from regional business cycles. The driver of monetary aggregate is the most significant determinant of regional fluctuations of macroeconomic aggregates, whereas oil price and productivity are on average important driving forces of nation-specific fluctuations of real economic activities.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.528-532
• /
• 1987

Closed-loop fiber-optic gyroscope with linear scale factor for a wide dynamic range is demonstrated using a gating process and two-harmonic phase modulation, of which the second harmonic is obtained by a frequency doubler. Also the effects of the second harmonic and duty cycle of gating signal on the linearity of scale factor are estimated theoretically and compared with the measured data. The experimental results show the best linearity of scale factor is about 0.5% within the rotation rate 90.deg./sec. The closed-loop fiber-optic gyroscope with gated two-harmonic phase modulation can be used in the application demanding less sensitive performance and modest scale factor linearity.

• Structural Engineering and Mechanics
• /
• v.22 no.4
• /
• pp.469-481
• /
• 2006

A new method called fuzzy factor method for the stationary stochastic response analysis of fuzzy truss with global fuzzy structural parameters is presented in this paper. Considering the fuzziness of the structural physical parameters and geometric dimensions simultaneously, the fuzzy correlation function matrix of structural displacement response in time domain is derived by using the fuzzy factor method and the optimization method, the fuzzy mean square values of the structural displacement and stress response in the frequency domain are then developed with the fuzzy factor method. The influences of the fuzziness of structural parameters on the fuzziness of mean square values of the displacement and stress response are inspected via an example and some important conclusions are obtained. Finally, the example is simulated by Monte-Carlo method and the results of the two methods are close, which verified the feasibility of the method given in this paper.

• Earthquakes and Structures
• /
• v.6 no.3
• /
• pp.301-316
• /
• 2014

This paper is devoted to investigate the effects of SSI on strength reduction factor of multistory buildings. A new formula is proposed to estimate strength reduction factors for MDOF structure-soil systems. It is concluded that SSI reduces the strength reduction factor of MDOF systems. The amount of this reduction is relevant to the fundamental period of structure, soil flexibility, aspect ratio and ductility of structure, and could be significantly different from corresponding fixed-base value. Using this formula, measuring the amount of this error could be done with acceptable accuracy. For some practical cases, the error attains up to 50%.