• Earthquakes and Structures
• /
• 제23권4호
• /
• pp.353-361
• /
• 2022

The dynamic behavior of a single pile was investigated by using analytical and numerical studies. The focus of this study was to develop the dynamic p-y curve of a pile for pseudo-static analysis considering the shear wave velocity of the soil by using three-dimensional numerical analyses. Numerical analyses were conducted for a single pile in dry sand under changing conditions such as the shear wave velocity of the soil and the acceleration amplitudes. The proposed dynamic p-y curve is a shape of hyperbolic function that was developed to take into account the influence of the shear wave velocity of soil. The applicability of pseudo-static analysis using the proposed dynamic p-y curve shows good agreement with the general trends observed by dynamic analysis. Therefore, the proposed dynamic p-y curve represents practical improvements for the seismic design of piles.

• Geomechanics and Engineering
• /
• 제28권2호
• /
• pp.107-116
• /
• 2022

The steady state of unsaturated soil takes a long time to achieve. The soil seepage behaviours and hydraulic properties depend highly on the wetting/drying rate. It is observed that the soil-water characteristic curve (SWCC) is dependent on the wetting/drying rate, which is known as the dynamic effect. The dynamic effect apparently influences the scanning curves and will substantially affect the seepage behavior. However, the previous models commonly ignore the dynamic effect and cannot quantitatively describe the hysteresis scanning loops under dynamic conditions. In this study, a dynamic hysteresis model for SWCC is proposed considering the dynamic change of contact angle and the moving of the contact line. The drying contact angle under dynamic condition is smaller than that under static condition, while the wetting contact angle under dynamic condition is larger than that under static condition. The dynamic contact angle is expressed as a function of the saturation rate according to the Laplace equation. The model is given by a differential equation, in which the slope of the scanning curve is related to the slope of the boundary curve by means of contact angle. Empirical models can simulate the boundary curves. Given the two boundary curves, the scanning curve can be well predicted. In this model, only two parameters are introduced to describe the dynamic effect. They can be easily obtained from the experiment, which facilitates the calibration of the model. The proposed model is verified by the experimental data recorded in the literature and is proved to be more convenient and effective.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.572-581
• /
• 2006

This study is to investigate dynamic response of concrete buried pipelines with various end boundary conditions and develop a curve fitted equation to ensure practicality and convenience for the use at the actual field for the test of resistance of earthquake. Dynamic response under the various end boundary conditions is calculated with analysis on values and computing programs. However, such a method of analysis requires skillfulness in using computing programs for dynamic movement of buried pipelines with dynamic analysis formula and has lower efficiency and practicality because, in the nature of analysis program of values, it needs much time to conduct repeated calculations. Therefore, the study is intended to develop a curve fitted equation to ensure more efficient and practical analysis. This paper tests various degrees of equation with non-linear least square method and developments a curve fitted equation based on the transmission speed with the best results. In the use of curve fitted equation, degree of polynomial and determining coefficient are influenced by the speed of transmission.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.877-883
• /
• 2009

Shaking table tests are performed to evaluate the dynamic group pile effect in fine sand. Single pile tests and $2{\times}4$ group pile tests are performed on 3D pile spacing. Dynamic p-y backbone curves are obtained to evaluate dynamic group pile effect by using dynamic p-y curve of single pile. And dynamic group pile p-multiplier is estimated by dynamic p-y backbone curve. Dynamic p-multiplier can be calculated by using subground reaction ratio of dynamic p-y backbone curve which is the same displacement of p-y curve peak point As the result, dynamic group pile effects are evaluated in terms of a shaking frequency, a shaking acceleration, and a relative density. Dynamic group pile p-multiplier is the largest at lead pile, and the value decrease at middle pile and trail pile. p multiplier increases as increasing input acceleration and decreasing relative density. This results coincide with NCHRP's research which suggest p multiplier increases as increasing pile cap displacement.

• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.188-193
• /
• 1998

This paper describes static and dynamic weak point analysis of spindle systems to eliminate high concentrated bending point on spindle and improve total stiffness of spindle systems. The weak point analysis is based on the evaluation of bending curves of spindles. For static weak point analysis the bending curve is derived from static deflection curve and for dynamic weak point analysis it is derived from the mode shape curves in consideration of the transfer function at exciting point. The validity of the weak point search methodology is verified by comparison of the static deflection, the natural frequency and the dynamic compliance between the original and the improved spindle.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제47권1호
• /
• pp.49-59
• /
• 2008

In this paper, we discuss two representations of a curve. One is a static representation as set of points, the other is a dynamic representation using time parameter. And we suggest needs of designing a computer microword where we can represent a curve both statically and dynamically. We also emphasize the importance of translation activity from a static representation to a dynamic representation. For this purpose, we first consider constructionism and 'computers and mathematics education' as a theoretical backgrounds. We focus the curve of a parabola in this paper since this is common in mathematics curriculum and is related to realistic situation such as throwing ball. And we survey the mathematics curriculum about parabola representation. And we introduce JavaMAL microworld that is integrated microworld between LOGO and DGS. In this microworld, we represent a parabola using a dynamic action, and connect this dynamic parabola action to recursive patterns. Finally, we remake a parabola for a realistic situation using this dynamic representation. And we discuss the educational meaning of dynamic representation and its computer microworld.

• 소성∙가공
• /
• 제5권4호
• /
• pp.327-336
• /
• 1996

The effect of dynamic strain aging on high temperature deformation behaviour of the A-Mg alloy was investigated by strain rate change tests and stress relaxation tests between 20$0^{\circ}C$and 50$0^{\circ}C$. Yield point, short stress transient and periodic discontinuities on the stress-strain curve were considered as an evidence of the effect of dynamic strain aging. With this criterion two distinct strain rate-temperature regimes could be manifested. Dynamic strain aging was considered to be effective in the high temperature-low strain rate regime, whereas dynamic recovery was a dominant deformation mechanism in the low temperature-high strain rate regime. It was found that dynamic strain aging in the high temperature deformation was governed by the mechcanism of diffusion-controlled, viscous dislocation movement.

• 한국지반공학회논문집
• /
• 제32권3호
• /
• pp.39-47
• /
• 2016

본 연구에서는 말뚝 설치 방법에 따른 동적 p-y 곡선의 차이를 분석하기 위하여, 1g 상태에서 지반 조성 전 설치한 말뚝과 지반 조성이 완료된 후에 1g 상태에서 압입하여 설치한 말뚝, 그리고 40g의 원심 가속도 조건에서 압입시킨 말뚝에 대해 동적 원심모형 실험을 수행하였다. 실험 결과로부터 얻은 각 모형 말뚝의 동적 p-y 곡선의 최대지반반력을 이용하여 동적 p-y 중추곡선(Backbone curve)을 쌍곡선 함수로 나타내었다. 말뚝 설치 방법에 따른 동적 p-y 중추곡선 분석 결과, 40g 조건에서 압입한 말뚝이 1g 상태에서 압입한 말뚝 및 지반 조성 전 설치 말뚝에 비해 말뚝에 작용하는 지반반력이 크게 평가되었으며, 이러한 지반반력의 차이는 깊이가 깊어질수록 작아지는 것으로 나타났다. 일련의 p-y 곡선 결과를 바탕으로 기존에 제안된 현장타설말뚝에 대한 동적 p-y 중추곡선의 적용성을 평가하고, 이를 수정한 압입 및 항타 말뚝에 대한 동적 p-y 곡선 산정식을 개발하였다.

• 한국정밀공학회지
• /
• 제12권9호
• /
• pp.59-65
• /
• 1995

The cam is used to a main component in a variety of automatic machines and instruments. To meet the demand of a complicated operation and of reducing weight for automatic machine, Curve Blending Technology, in which each of the basic curves suitable for individual interval is connected, is used for the cam design. In the curve blending, it is necessary to select appropriate elementary curve for each interval and to confirm the dynamic continuity at connecting points between adjoining elementary curves. This paper represented the elementary curve selection method to select an appropriate curve for each interval, and executed computation for the follower displacement and angular displacement of each interval. The paper made an analysis and examine closely for elementary curves to synthesizing curve blending, and it performed dynamic conditions clearly at every points on the cam motions. Therefore the curve blending technology presented by the paper turned into easier work.

• Journal of Welding and Joining
• /
• 제17권2호
• /
• pp.97-103
• /
• 1999

The dynamic resistance monitoring in primary circuit is one of the important issues. Because in-process and real time quality assurance of resistance spot weld is needed to increase the product reliability. In this study, new dynamic resistance detecting method is proposed as a practical manner of weld quality assurance using instantaneous current and voltage measured at the primary circuit. and also, various patterns of primary dynamic resistance curve are characterized with the macro photograph and the weldability lobe curve. It is found that the primary dynamic resistance patterns are basically similar to those of the secondary, but there is evident advantage such as no extra devices are needed to obtain the quality information and eventually real time feedback control will be possible.