• Steel and Composite Structures
• /
• 제8권1호
• /
• pp.53-83
• /
• 2008

A rational and efficient seismic design methodology for irregular space steel frames using advanced methods of analysis in the framework of Eurocodes 8 and 3 is presented. This design methodology employs an advanced static or dynamic finite element method of analysis that takes into account geometrical and material non-linearities and member and frame imperfections. The inelastic static analysis (pushover) is employed with multimodal load along the height of the building combining the first few modes. The inelastic dynamic method in the time domain is employed with accelerograms taken from real earthquakes scaled so as to be compatible with the elastic design spectrum of Eurocode 8. The design procedure starts with assumed member sections, continues with the checking of the damage and ultimate limit states requirements, the serviceability requirements and ends with the adjustment of member sizes. Thus it can sufficiently capture the limit states of displacements, rotations, strength, stability and damage of the structure and its individual members so that separate member capacity checks through the interaction equations of Eurocode 3 or the usage of the conservative and crude q-factor suggested in Eurocode 8 are not required. Two numerical examples dealing with the seismic design of irregular space steel moment resisting frames are presented to illustrate the proposed method and demonstrate its advantages. The first considers a seven storey geometrically regular frame with in-plan eccentricities, while the second a six storey frame with a setback.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.760-765
• /
• 2013

Eco-friendly material applied to building would be one of the materials which is must developed for global environmental conservation and reduction of carbon dioxide. For development of eco-friendly material, a cellulose sound-absorbing material has been developed with waste paper through adjustment of various mix proportions. The developed cellulose sound-absorbing material has been tested for its acoustic properties such as acoustic absorptivity and dynamic elastic modulus. The absorptivity was evaluated by developing six samples and using impedance tube and reverberation chamber. As a result of the evaluation, 0.64(NRC) was secured in absorptivity and $4.7MN/m^3$ was indicated in dynamic elastic modulus. Also, for practical use of developed sound-absorbing material as inner heartwood in drywall, comparison test of sound reduction index was performed with existing glass wool sound-absorbing material and constructed drywall of gybsum board. The results have shown 55dB(Rw) of sound reduction index in glass-wool wall and 46dB(Rw) in cellulose.

• 한국소음진동공학회논문집
• /
• 제23권5호
• /
• pp.456-462
• /
• 2013

Eco-friendly material applied to building would be one of the materials which is must developed for global environmental conservation and reduction of carbon dioxide. For development of eco-friendly material, a cellulose absorber has been developed with waste paper through adjustment of various mix proportions. The developed cellulose absorber has been tested for its acoustic properties such as absorption coefficient and dynamic stiffness. The absorption coefficient was evaluated by developing six samples and using impedance tube and reverberation chamber. As a result of the evaluation, 0.64(NRC) was secured in absorption coefficient and 4.7 $MN/m^3$ was indicated in dynamic stiffness. Also, for practical use of developed absorbers as inner heartwood in drywall, comparison test of sound reduction index was performed with existing glass wool absorbers and constructed drywall of gypsum board. The results have shown 55 dB(Rw) of sound reduction index in glass-wool wall and 46 dB(Rw) in cellulose.

• ETRI Journal
• /
• 제38권5호
• /
• pp.858-867
• /
• 2016

A high dynamic range (HDR) video service is an upcoming issue in the broadcasting industry. For compatibility with legacy devices receiving a non-constant luminance (NCL) signal, new tools supporting an HDR video service are required. The current pre-processing chain of HDR video can produce color noise owing to the chroma component down-sampling process for video encoding. Although a luma adjustment method has been proposed to solve this problem, some disadvantages still remain. In this paper, we present an adaptive color noise reduction method for an NCL signal of an HDR video service. The proposed method adjusts the luma component of an NCL signal adaptively according to the information of the luma component from a constant luminance signal and the level of color saturation. Experiment results show that the color noise problem is resolved by applying our proposed method. In addition, the speed of the pre-processing is increased more than two-fold compared to a previous method.

• 한국태양에너지학회 논문집
• /
• 제31권4호
• /
• pp.1-8
• /
• 2011

In this paper, inverse building modeling was applied to building perimeter zones which have different window orientation. Two test zones of east-facing and west-facing zones in ERS(Energy Resource Station) building, which is representative of small commercial building, was used to test performance of cooling load calculation and peak cooling load reduction. The dynamic thermal load model for the east and west zone was validated using measured data for the zones and then it was used to investigate the effect of peak cooling load reduction by adjustment of indoor cooling temperature set points during on-peak time period. For the east zone, the peak load can be reduced to about 60% of the peak load for conventional control even without any precooling. For the west zone, PLR is nearly independent of the start of the on-peak period until a start time of 1pm. Furthermore, PLR has a small dependence on the precooling duration. Without any precooling, the peak cooling load can be reduced to about 35% of the peak load associated with conventional control.

• 대한설비공학회지:설비저널
• /
• 제17권4호
• /
• pp.382-394
• /
• 1988

Dynamic characteristics of thermally-forced stratification process in a square enclosure with a linear temperature profile at the side walls have been investigated through flow visualization experiment and numerical analysis. The experiment was performed on air with the Rayleigh numbers of order $10^5$. A particle tracer method is used for the flow visualization and to obtain a sudden linear temperature profile at the side walls copper blocks which already have a linear temperature profile are come into contact with the thin copper plates of the test section. Immediately a meridional circulation is developed and heat transfer takes place from the wall to the interior region by circulation of fluid and finally a thermal stratification is achieved. In the numerical study, QUICK scheme for convective terms, SIMPLE algorithm for pressure correction, and the implicit method for the time marching are adopted for the integration of conservation equations. Comparison of flow visualization and numerical results shows that the developing flow patterns are very similar in dynamic nature even though there is a time lag due to the inevitable time delay in setting up a linear temperature profile. For high Rayleigh numbers, the oscillatory motion is likely to take place and stratified region is extended. However, initial temperature adjustment process is much slower than that for low Rayleigh numbers.

• 부동산연구
• /
• 제27권1호
• /
• pp.33-44
• /
• 2017

최근 중국은 부동산 가격이 급격히 상승하고 있으며, 인플레이션이 부동산 가격의 상승을 유발시킨다는 주장이 제기되고 있다. 따라서 본 연구에서는 2006-2014년의 중국 성별 패널 자료를 이용하여 인플레이션이 중국 부동산시장의 버블에 미치는 영향을 분석하였다. 분석방법은 정태 및 동태(static and dynamic) 패널 데이터 모델을 사용하였다. 본 연구의 분석결과, 인플레이션이 중국 부동산 버블형성의 주요 원인이며 중국 동부지역에서 그 영향이 더욱 뚜렷하게 나타남을 확인할 수 있었다. 우리는 더불어 중국부동산거품이 일정 정도 시장자체조정기제의 영향을 받았다는 흥미로운 현상을 발견했다.

• Journal of Positioning, Navigation, and Timing
• /
• 제2권1호
• /
• pp.81-89
• /
• 2013

Many of the current visual odometry algorithms suffer from some extreme limitations such as requiring a high amount of computation time, complex algorithms, and not working in urban environments. In this paper, we present an approach that can solve all the above problems using a single camera. Using a planar motion assumption and Ackermann's principle of motion, we construct the vehicle's motion model as a circular planar motion (2DOF). Then, we adopt a 1-point method to improve the Ransac algorithm and the relative motion estimation. In the Ransac algorithm, we use a 1-point method to generate the hypothesis and then adopt the Levenberg-Marquardt method to minimize the geometric error function and verify inliers. In motion estimation, we combine the 1-point method with a simple least-square minimization solution to handle cases in which only a few feature points are present. The 1-point method is the key to speed up our visual odometry application to real-time systems. Finally, a Bundle Adjustment algorithm is adopted to refine the pose estimation. The results on real datasets in urban dynamic environments demonstrate the effectiveness of our proposed algorithm.

• 노동경제논집
• /
• 제34권3호
• /
• pp.1-28
• /
• 2011

이 논문은 노조기업의 노동수요탄력성이 비노조기업의 그것보다 작을 것이라는 이론적 예측을 실증적으로 검증한다. 이를 위해 기업정보 TS2000의 1990~2009년 기간의 기업체패널 자료를 이용하여 노동수요함수의 정태모형과 동태모형 그리고 노동비용 비증방정식을 추정한다. 추정결과는 첫째, 노조기업의 노동수요의 임금탄력성은 0.34~0.49로 비노조기업의 절반 수준이하로 나타났다. 둘째, 노조기업은 임금 및 산출 변화에 대한 고용조정에서 비노조기업보다 더 경직적인 것으로 나타났다. 셋째, 노동과 자본간 대체탄력성에 있어서는 노조기업과 비노조기업 간에 차이가 없는 것으로 나타났다.

• 한국조사연구학회지:조사연구
• /
• 제12권3호
• /
• pp.173-186
• /
• 2011

본 연구에서는 2003년 시작된 한국청소년패널조사 중학교 2학년 패널자료 분석을 위해 필수적인 각 연도별 횡단면, 종단면 가중치 산출방안을 소개하고 있다. 패널 모집 당시 추출된 표본이 대표하는 모집단의 종단면적 변화 분석을 위한 종단면 가중치는 로지스틱 회귀분석을 이용한 무응답 보정과 사후 층화를 통해 산출되었으며, 조사 연도의 표본 대응 모집단 분석을 위해 필수적인 횡단면 가중치는 전년도 대비 응답률과 사후 층화를 통해 산출되었다.