• 한국의류학회지
• /
• 제25권2호
• /
• pp.268-274
• /
• 2001

Dyeing properties of the colorants extracted from pomegranate hull on silk fabric were investigated. Pomegranate colorants were characterized by FT-IR analysis. Effects of dyeing condition and mordanting on dye uptake, color change and colorfastness were explored. Pomegranate colorants showed high affinity to silk fiber and its isotherm adsorption curve was Langmuir type. Therefore, ionic bond was involved in the adsorption of pomegranate colorants on to silk fiber. Mordants except Fe did not significantly increase dye adsorption. Pomegranate colorants produced mainly yellow color on silk fabric, but the silk mordanted with Fe showed yellow red color. Fastness to washing, perspiration, and rubbing was not improved by mordanting treatment, but light colorfastness was increased by Fe mordant.

• 한국염색가공학회지
• /
• 제13권2호
• /
• pp.42-42
• /
• 2001

Following the prior studs regarding that 1.0g of cotton fabric cound be dyed uniformly with a reactive dye in the solvent mixture of 2㎖ of water and 23㎖ of dichloromethane, silk fabric was dyed with C. I. Reactive Blue 203 in the water/dichloromethane two-phase immiscible solvent media. In order to minimize dye loss due to its hydrolysis, the reactive dyeing was carried out in dichloromethane containing a small amount of water. With only 3㎖ of water in 22㎖ of dichloromethane, 1.0g of silk fabric could be dyed perfectly. The uptake ratio was increased greatly, compared with that of normal reactive dyeing in a water medium. It would seem that the one of hydrophobic solvents, dichloromethane, can assist the even dyeing as it disperses a small amount of dye-dissolved water phase and conveys this water phase to the fabric entirely and uniformly.

• 한국염색가공학회지
• /
• 제13권1호
• /
• pp.55-60
• /
• 2001

Cotton fabric was deed with a reactive dye in water/dichloromethane two-phase immiscible solvent media. In order to minimize dye loss due to its hydrolysis, the reactive dyeing was carried out in dichloromethane containing a small amount of water. With only 2ml of water in 23m1 of dichloromethane, 1.0g of cotton fabric could be dyed perfectly. The uptake ratio was increased greatly, compared with that of normal reactive dyeing in a waters medium. It would seem that the one of hydrophobic solvents, dichloromethane, can assist the eden dyeing as it disperses a small amount of dye-dissolved water phase and conveys this water phase to the fabric entirely and uniformly.

• 한국염색가공학회지
• /
• 제13권2호
• /
• pp.128-134
• /
• 2001

Following the prior studs regarding that 1.0g of cotton fabric round be dyed uniformly with a reactive dye in the solvent mixture of $2m\ell$ of water and $23m\ell$ of dichloromethane, silk fabric was dyed with C. I. Reactive Blue 203 in the water/dichloromethane two-phase immiscible solvent media. In order to minimize dye loss due to its hydrolysis, the reactive dyeing was carried out in dichloromethane containing a small amount of water. With only $3m\ell$ of water in $22m\ell$ of dichloromethane, 1.0g of silk fabric could be dyed perfectly. The uptake ratio was increased greatly, compared wish that of normal reactive dyeing in a water medium. It would seem that the one of hydrophobic solvents, dichloromethane, can assist the Even dyeing as it disperses a small amount of dye-dissolved phase and conveys this water phase to the fabric entirely and uniformly.

• 한국염색가공학회지
• /
• 제10권3호
• /
• pp.1-9
• /
• 1998

The dyeing properties of modified wool were examined with a series of acid, reactive and cationic dyes. Cationic agent and sulphamic acid were applied to wool fabric for dye assist and resist effect. Wool pretreated with cationic agent showed better uptake of acid and reactive dyes than did untreated wool. On the other hand, the dyeing behavior of wool pretreated with sulphamic acid was found as follows : Acid dyes were poorly resisted with a hydrophobic mechanism but acid dyes were strongly resisted with a hydrophilic mechanism. Reactive dyes were also found to be effectively resisted. Sulphamic acid introduces sulphonate group into wool's structure, it has increased better uptake of cationic dyes than untreated wool. The degree of differential uptake depends on the level of pretreatment and produces a variety of tone-on-tone and multicolor effect in piece dyeing.

• 한국의류학회지
• /
• 제12권3호
• /
• pp.343-350
• /
• 1988

This study was carried out to investigate the microstructure and physical property of PET POY which was taut-annealed under various conditions. The DSC melting curves of annealed PET POY showed double melting peaks in most cases. As temperature and time increased, form II crystal became sharp and increased in size, and form I crystal decreased in size. The slower the heating rate, the higher the programmed heating effect during DSC analysis. Crystallinity and briefringence of annealed specimens increased as the treatment temperature and time increased. Breaking tenacity of specimens treated for 3 minutes increased as the treatment temperature increased, but others decreased. Elongation at break decreased as the annealing temperature and time increased. Dye uptake of annealed specimens decreased as the temperature increased up to $190^{\circ}C\~210^{\circ}C$. then the uptakes increased at higher temperatures. At the same temperature, dye uptake of the specimen decreased as time increased.

• 한국염색가공학회지
• /
• 제8권2호
• /
• pp.64-70
• /
• 1996

Wool yarns were treated in dimethylformamide solutions containing various concntrations of three dibasic acid anhydrides: succinic, itaconic, and phthalic arthydrides in various conditions. The structurl aspects of these dibasic acid anhydries are different: succinic, itaconic, and phthalic acid arthydrides have saturated aliphatic ethylene, unsaturated aliphatic vinyl and aromatic phenyl one groups, respectively. The properties of acylated wool keratin are as follows: Decreasing amino group and increasing carboxyl group by acylation lowered the hydrophilic property, and then moisture regain, and decreased acid dye uptake and enhanced cationic dye uptake of wool keratin. In the case of phthalic acid anhydries, in spite of lowest acyl content, the minimum of moisture regain was resulted from the bulk benzen ring, occuping much more voids on wool keratin molecules than other reagents. Acid solubility was increased by the decrease of amino group and hydrogen bonding by acylation. Alkali solubility was also increased formation of new amide group on the side chain of keratin, which can be degraded easily by alkali. In the case of phthalic acid anhydride, the relative high solubility was resulted from the much higher molecular weight of dissolved fractions. The surface of wool keratin was not damaged by treatment with any acylating agent.

• 복식문화연구
• /
• 제12권6호
• /
• pp.999-1009
• /
• 2004

Chitin is a derived product from the shell of shrimp or crab. Chitosan, a deacetylated product of chitin, has widely been used in the biomedical sector, food industry, and textile industry. Chitosan exhibits fiber-forming property under certain conditions. Nonwoven fabrics made of chitosan fibers may have diverse applications in the industry. Previous studies have revealed that the dye uptake properties of natural dyestuffs improved by the chitosan pretreatment on the fabric specimens. In this case, fabric specimen is coated with acidic salt form of chitosan, which is different from the pure chitosan, since the coating process employes coating with the acidic solution of the chitosan and subesquent drying. In this study, chitosan nonwoven fabric samples were prepared from chitosan sample having deacetylation degree of $100\%$ and molecular weight of 650,000. Chitosan nonwoven fabrics maintain the form of $-NH_2$ end-group. These in turn exhibit higher dye uptake ability than the fabrics coated with chitosan acidic solutions do.

• 한국염색가공학회지
• /
• 제24권1호
• /
• pp.18-26
• /
• 2012

In this work, colorants extraction process from gromwell was studied for making powder form of colorants by solving the high viscosity problem of gromwell extracts. In order to do that, sugar extracted together with colorants must be pre-extracted. For sugar decomposition, gromwell roots were pretreated with various enzyme solutions. The total sugar content of pre-extract with enzyme solution was measured. Accordingly, the effects of enzyme type and pretreatment condition on sugar decomposition were investigated to find appropriate enzyme(amylase, hemicellulase, pectinase) and enzyme activity (100~1000unit), pre-extracted time(3~24hr). Color characteristics and dye uptake of dyed fabrics were evaluated. Gromwell colorants were assessed for their potential antimicrobial activities, which possibly expand their end use as functional pigments. The efficiency of removing sugar was increased in the order of hemicellulase, pectinase, amylase, $H_2O$. Gromwell colorants powder yield was in the range of 4.4% to 9.8% depending on pretreatment enzyme. Gromwell colorants produced RP color on the silk and wool fabrics with good dye uptake. Antimicrobial activity of gromwell colorants will greatly increase its potentiality for applying as functional natural colorants in the future.

• 한국염색가공학회지
• /
• 제23권2호
• /
• pp.90-99
• /
• 2011

The aim of this study is to develope eco-printing method using natural pigments and chitosan as a natural binder. Three chitosans with different molecular weights were employed to find appropriate conditions including chitosan concentration and pigment/binder ratio. Dye uptake, color and fastnesses of the printed fabrics were evaluated to find optimum conditions within the range of experiments carried out in this study. The effectiveness of chitosan as a printing binder was examined in comparison with color, dye uptake, and fastnesses of conventional synthetic binder and guar gum. It was found that chitosans with low or medium molecular weight were appropriate. Using low molecular weight chitosan, optimum concentrations were 1.7% for charcoal, madder and chlorophyll, whereas 2.2% for ocher, yellow soil, indigo and cochineal. Regardless of molecular weight and concentration of chitosan, the color fastnesess of fabrics printed with mineral pigments were superior to those of the fabrics printed with plant and animal pigments. As pigment/chitosan ratio became higher, rubbing fastness was decreased by 1-3 grade. The colorfastness of printed fabric with chitosan binder was similar to that with synthetic binder, which was higher than that with guar gum.