• 한국염색가공학회지
• /
• 제14권4호
• /
• pp.197-207
• /
• 2002

The physical properties and dyeability of the nylon 6 fibers prepared by high speed spinning at take-up speed of 4,100~5,600m/min were investigated. The strain decreased as the take-up speed was raised from 4,100m/min to 4,400m/min, but further increase of take-up speed could not decrease the strain. The stresses of the fibers spinned at various take-up speed did not make any noticeable differences. Birefringences, densities and crystallinities of the fibers increased with the take-up speed and then reached to a nearly maximum value at 5,300m/min. In DSC diagrams, the $\gamma$ form of crystal became dominant at higher take-up speed. The dye uptakes of C. I. Acid Blue 113 on the fibers decreased a little with the increase of take-up speed.

• 복식문화연구
• /
• 제25권5호
• /
• pp.648-655
• /
• 2017

This study measured dyeing properties under different dyeing conditions and levels of antimicrobial activity when man-made fibers are dyed with gallnut, including rayon, tencel, tencel blended fabric, soybean fiber, and nylon non-mordanted. The dye up-take (K/S), color ($L^*a^*b^*$), and color differences (${\Delta}E$) were measured with a colorimeter, and the number of bacteria present in the dyed fabrics were determined using Staphylococcus aureus and Klebsiella pneumonia as strains. The results are as follows: First, the optimal dyeing conditions for man-made fibers dyed with gallnut are 60 minutes of dyeing time and a $80^{\circ}C$ dyeing temperature. Second, gallnut dye is most effective on soybean fiber and then, in descending order of effectiveness, on nylon, rayon, tencel, and tencel blended fabric. This means that dyeing properties of nitrogen containing fibers are excellent when using gallnut. Third, all man-made fibers are dyed brown with gallnut. This implies dyeing possibility of man-made fibers about gallnut dye, so development and supply of natural dyed goods of man-made fibers can be increased. Fourth, in all man-made fibers dyed with gallnut extract, both Staphylococcus aureus and Klebsiella pneumonia show 99.9% reduction ratios of fungistasis, which indicate antimicrobial activity. Therefore, safe, functional, man-made materials can be developed to relieve symptoms from and treat patients with skin ailments.

• 한국염색가공학회지
• /
• 제13권3호
• /
• pp.180-187
• /
• 2001

Generally, polyester microfiber has much greater dye uptake than that of regular ones. In spite of high dye up-take visual shade depth of dyed fabric decreases with smaller denier, which results in poor washing fastness of dyed fabric. In this study, in order to investigate the washing fastness, polyester microfiber fabric was dyed by using two type of disperse dyes and treated with 3 different reduction clearing methods. The reduction clearing methods in this study are normal alkaline reduction clearing, $N_2$ gas replacement method, and ultrasonic treatment during reduction clearing. The results were as followings ; The most important factors affecting the washing fastness of polyester artificial suede fabric were found to be the reduction clearing method, the chemical structure of used disperse dyes and the structure and denier of fibers. It was also obtained that the heat treatment of dyed fabric decreased the washing fastness due to the dye migration from inner phase to surface.

• 한국의류산업학회지
• /
• 제6권2호
• /
• pp.234-238
• /
• 2004

Loess was selected as one of the natural dyes and dye solution was extracted from it. With the dyes extracted from loess, the sample fabrics were dyed at 10, 20, and 30 minutes and then $CuSO_4$ was used to treat the dyed fabrics on the concentration of 3%, and 5%. Color difference and colorfastness of the sample fabrics with dyeing time and concentration of post-mordanted agent were analysed. The results were as follows: 1. Effective dying time was 20 minutes since any more dye up-take to the fabrics did not occur after that time. 2. There was distinctive dyeing effect according to whether post-mordanted method was done or not, but there was little effect between post-mordanted concentration of 3% and 5%. 3. There was no effect of the colorfastness on the post-mordanted concentration. The abrasion and laundering colorfastness of post-mordanted fabric samples was better than those of no post-mordanted fabric samples and the light colorfastness of the fabric samples was good regardless of post-mordanted method.

• 복식
• /
• 제36권
• /
• pp.109-119
• /
• 1998

For the purpose of standardization and practicability of natural dyeing, the mordanting and dyeing properties of Caseaslpinia Sappan, L. and Brazilin were studied. Appropriate extraction, dyeing and mordanting condition of Caeaslpinia Sappan, L. were determined, and the effect of mordanting method on dye up-take adn color fastness of dyed fabric was investigated. The most absorbance of Caeaslpinia Sappan, L. solution was 445nm, Brazilin was 448nm. The color of bazilin solution was affected by pH 7~9. The optimum temperature to extract Caesalpinia Sappan, L. was 10$0^{\circ}C$ adn dyeing solution for 1 hour. In case mordants concentration, the most absorbance was 0.3%. In case mordanting test, the best and proper temperature to quantities of absorbed mordants in silk was 8$0^{\circ}C$ and the most quantities of absorbed mordants in silk was mordant treatment by Cu. Effective dyeing time to silk was 60min. Effective mordanting temperature was 8$0^{\circ}C$, and its time was 30min. K/S value of dyeing fabrics was recoginazed by mordanting treat-ment, specially Fe, Sn, Al, Cu. K/S value of pre-mordanting was higher than post-mordanting. After soaping treatment K/S value of pre- and post-mordanting silk was decreased and 0.1%(W/V) quantity of mordant was sufficient for treatment. In the case of Caeaslpinia Sappan, L. fastness was increased by mordanting treatment. Mordants and mordanting treatment method affected the amount of absorption and color change of dyed silk.

• 한국컴퓨터정보학회논문지
• /
• 제10권1호
• /
• pp.157-166
• /
• 2005

유비쿼터스 시대와 더불어 미용학의 헤어분야도 발전하고 있다. 본 논문에서는 유비쿼터스 네트워크에서 디지털 헤어 체인징을 설계하고 구현한다. 미용사가 시술하기 위해 디지털 카메라를 이용하여 고객의 얼굴 모습을 촬영한다. 인터넷에 접속하여 고객의 얼굴과 헤어가 모니터에 나타나면, 웹 서버에서 보유한 커트, 퍼머, 업스타일, 염색, 긴 머리 등의 디지털 콘텐츠를 이용하여 이동단말기에서 고객의 헤어모습에 대한 선택과 호응을 얻는다. 미용사는 이동단말기의 헤어 디자인 이미지를 보면서 고객의 헤어를 시술 한 후, 다시 디지털 카메라로 찍어 웹 서버에 자료를 업 데이트 한다. 고객은 이 사진을 자신의 이동단말기에 저장한다. 유비쿼터스 네트워크에서 이를 적용하기 위한 유비쿼터스 헤어 체인징 시스템을 설계하고, 디지털 헤어 콘텐츠와 온라인 인터넷 시스템 및 이동단말을 통한 시스템을 구현하여 미용 정보사회 발전에 기여하고자 한다.

• 한국의류학회지
• /
• 제22권2호
• /
• pp.250-256
• /
• 1998

The culture of makeup has early developed in China. Especially, beautiful eyebrows were the symbol of a beauty. This study is related to fashionable Cheong-Dae in Han Dynasty. In Han Dynasty, women painted thier eyebrows with blue color in a different color from former periods. This fact has close connection with the bordering countries on Western China. Together with Hu fashion having been in fashion during trading directive with Western China women has seemed to use Cheong-Dae for their makeup in Han Dynasty. In Hand Dynasty, Ferghana women had very often used it for their makeup. And it had produced in Ferghana, Jaguda, Kashkar. In Tang Dynasty, it has been said that Persia was the best. Let's take a look at the producing method. Soak indigo plants in water add lime and stir it up, then bubbles are formed. They are called it as Cheong-Dae. Nearly, they are produced in the course of indigo dying. So we can see inflowing course of Cheong-Dae into China through the history of Indigo dying. We can guess the use of Cheong-Dae in Egypt. Indeed, Nile Blue is used for the Protection their access from insects as well as effect of coolness visually. This guess is very reasonable because the fact is considered that some people dye with indigo color by the way of sedimentation in Peniasula of Sinai. Also, the PH of Cheong-Dae is about 7. So, it does no harm in skin and its color is dark blue. Cheong-Dae has effects of insecticide and removal of fever. Cheong-Dae that had been used in Peninsula of Egypt seems to have been carried into China through Silk Route. And by trial to make Cheong-Dae it is proved that its ingredient is plant.

• 한국산학기술학회논문지
• /
• 제18권4호
• /
• pp.1-7
• /
• 2017

염료감응형 태양전지 촉매층으로 CoSi의 신뢰성을 확인하기 위해 전자빔증착기를 이용하여 100 nm-Co/300 nm-Si/quartz의 적층구조를 형성하고, $700^{\circ}C$-60분의 진공열처리하여 약 350 nm-CoSi를 형성하였다. 이때 잔류 Co를 제거하기 위해 $80^{\circ}C$-30%의 황산처리를 진행하였다. 또한 비교를 위해 100 nm-Pt/glass 상대전극을 준비하였다. CoSi 상대전극이 채용된 DSSC 소자의 신뢰성을 확인하기 위해 $80^{\circ}C$ 온도조건에서 0, 168, 336, 504, 672, 840시간동안 유지하였다. 이들을 채용한 DSSC 소자의 광전기적 특성을 분석하기 위해 solar simulator와 potentiostat을 이용하였다. CoSi 상대전극의 촉매활성도, 미세구조, 그리고 조성 분석을 확인하기 위해 CV, FE-SEM, FIB-SEM, EDS를 이용하여 분석하였다. 시간에 따른 에너지변환효율 결과, Pt와 CoSi 상대전극 모두 에너지변환효율이 504시간까지는 유지되다가 672시간 경과 후 처음의 50%로 감소하는 특성을 보였다. 촉매활성도 분석 결과, 시간이 지남에 따라 Pt와 CoSi 상대전극 모두 촉매활성도가 감소하여 각각 64%, 57%의 촉매활성도를 보였다. 미세구조 분석 결과, CoSi층은 전해질에 대한 안정성은 우수하였으나, 하부 쿼츠 기판과 CoSi층의 접촉면에 스트레스가 집중되어 국부적으로 크렉이 형성되며, 궁극적으로 ${\mu}m$급의 박리현상을 확인하였다. 따라서 CoSi 상대전극은 실리사이드화 되는 과정에서 잔류응력 때문에 열화가 일어나므로 신뢰성의 확보를 위해서는 이러한 잔류응력의 대책이 필요하였다.