• 한국염색가공학회지
• /
• 제25권3호
• /
• pp.181-193
• /
• 2013

The purpose of this study is to investigate dyeing properties and functionality of cotton and silk fabrics dyed with hot-water extract from Juniperus chinensis heartwood. Water-soluble dye of Juniperus chinensis heartwood extracted with distilled water was expressed YR color series. Dye uptake of cotton continued to increase according to the increase of the dye concentration. Its variation trends were shown to be similar to the isothermal absorption curve of the Freundlich. Dye uptake of silk was better than cotton, increased depending on increasing concentration of the dye, dyeing time and temperature. Its variation trends were shown to be similar to the isothermal absorption curve of the Langmuir. As the pH increased, the dye uptake of fabrics reduced and showed increased on red tinge. Colors of the dyed fabrics were various, depending on dye concentration and the mordant type and mordant concentration. Washing fastness, light fastness and perspiration fastness were not good. However, rubbing and dry cleaning fastness showed relatively good grade. Dyed fabrics of ultraviolet-cut ability and deodorant ability were improved. And dyed fabrics showed antimicrobial abilities of 99.9% against Staphylococcus aureus.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.297-300
• /
• 2007

In this study, we have attempted a new method to enhance the coloring of dye on the $TiO_2$ surface in the dye sensitized solar cell. In the conventional coloring process in a dye sensitized solar cells, dye is absorbed by the covalent bond between TiO2 and dye molecule while the photo-electrode coated with $TiO_2$ layer is soaked in dye solution for about 12-24 hours. But this process takes long time, so we have researched more effective and faster way than the conventional process by applying electric field. Three kinds of electric power such as direct voltage, alternating voltage and pulse voltage were applied to the transparent conducting oxide during the coloring process. As a result, we achieved improved power, fill factor and efficiency of dye-sensitized solar cell in case of applying direct voltage and pulse voltage. In contrast, alternating voltage tend to reduce the dye adsorption on the $TiO_2$ surface and hence the efficiency. We measured the absorption spectra of dye by UV-VIS spectrophotometer before and after soaking the $TiO_2$ in the dye and found no characteristic change in the dye was observed. In this study, we researched on shortening time of coloring process which spent much time in the whole process.

• 대한화학회지
• /
• 제53권6호
• /
• pp.704-708
• /
• 2009

분광광도법으로 칼라렌즈 내 염색제에 대한 흡광도를 연구하였다. 사용된 렌즈와 염색제는 각각 CR-39 플라스틱 광학렌즈와 Ons & $Lavas^{(R)}$의 Blue 1800 이다. 칼라렌즈 내 염색제의 흡광도는 칼라렌즈와 CR-39 렌즈의 흡광도의 차를 이용하여 구하였으며, 염색제의 평균농도는 칼라렌즈와 CR-39 렌즈의 질량차로부터 구하였다. 칼라렌즈에 침투된 염색제에 대하여도 흡광도와 평균농도 사이에 Beer 법칙이 성립하였고, 검정선의 기울기로부터 흡광계수는 a=0.983 $Lg^{-1}cm^{-1}$임을 알아내었다.

• 한국응용과학기술학회지
• /
• 제13권1호
• /
• pp.87-98
• /
• 1996

In this study, benzoxazolo carbocyanine dye was used as sensitizer for photographic emulsion, and the photographic characteristics were examined. The basic properties of sensitizer such as stability in various solvents were examined. The sensitizer was very stable in methanol, acetonitrile, acetone, dimethylformamide, and chloroform solution. Absorption spectra of benzoxazolo carbocyanine dye $2.5{\times}10^{-6}M$ and $5{\times}10^{-6}M$ concentrations in 10% aqueous methanol solutions containing $10^{-2}M$ potassium chloride show the monomer-J-aggregation characteristics. Compared to the absorption peak of the monomer in pure methanol solution, the red shifts of the monomer-J-aggregate peaks of benzoxazolo carbocyanine dye of $2.5{\times}10^{-6}M$ and $5{\times}10^{-6}M$ concentrations in 10% aqueous methanol solutions containing $10^{-2}M$ potassium chloride are 34nm respectively, and the sensitizing peak of benzoxazolo carbocyanine dye in photographic emulsion has red shift of 34nm. Therefore, if was concluded that benzoxazolo carbocyanine dye can be used as green sensitizing dye for the spectral sensitization of photographic emulsion.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.35-42
• /
• 1996

In this Paper, optical absorption were performed on LB films of binary mixtures of three kinds of merocranine dyes DO, DS, and 6Me-BS, where DS and 6Me-DS form J-like aggregates but not DO in single component films. The observed optical absorption spectra of mixed films were markedly defendent on the combination of dyes. [6Me-DS]$\sub$1-x/[DOl]$\sub$x/ LB films show a sharp red shifted J-like band peak in the whole concentration range. We found the formation of f aggregates in a mixed merocyanine dyes containing a non J-aggregate forming dye DO, in a single component case. Farther investigations on the present and other mixed-dye films will be needed to clarify these points.

• 한국의류산업학회지
• /
• 제7권5호
• /
• pp.547-552
• /
• 2005

The study has objective in raising value of the gray color as a meaningful color suiting sentiments of modern people by expressing the gray color in various perspective utilizing natural dyes that is natural at the same time having aesthetic color tones. For example, the main ingredient used for coloring black and gray color is the pyrogallol tannin and the gray tone dye can be acquired by combining the tannin with iron. In order to find the suitable condition for processing tannin, UV-Vis part absorption spectrum of Gallapple pyrogallol tannin, dye ability based on temperature and time, reflection rate based on concentration, color changes based on acid treatment and alkali treatment, changes on surface based on concentration or metal mordant condition, and lightfastness were measured. Maximum absorption wavelength (${\lambda}_{max}$) of Gallapple tannin was at around 273 nm, while strong absorption was also observed at below 350 nm. Dye ability of Gallapple tannin is done more easily on silk rather than cellulose fibers such as cotton, while the optimum condition for dyeing was observed to be at $60^{\circ}C$, for 20 minutes. As a result of acid treatment, the color of dye material consist highly of gray tones and showed red tone after the alkali treatment. While it was observed that as dye concentration and metal mordant concentration increased the color changed at counter-clockwise direction on the Y-scale of Munsell's scale of colors. Lightfastness was more on a normal fading. I hope this study opens up possibilities towards presenting gray color expressed from tannin as color with diversity and aesthetic value. In future, comparative study between dye expressed from catechol tannin dye materials will be helpful.

• 반도체디스플레이기술학회지
• /
• 제22권3호
• /
• pp.67-72
• /
• 2023

In this paper, a dye-sensitized solar cell (DSSC), one of the representative third-generation solar cells with eco-friendly materials and processes compared to other solar cells, was modeled using MATLAB/Simulink. The simulation was conducted by designating values of series resistance, parallel resistance, light absorption coefficient, and thin film electrode thickness, which are directly related to the efficiency of dye-sensitized solar cells, as arbitrary experimental values. In order to analyze the performance of dye-sensitized solar cells, the optimal value among each parameter experimental value related to efficiency was found using formulas for fill factor (FF) and conversion efficiency.

• 펄프종이기술
• /
• 제37권2호
• /
• pp.47-56
• /
• 2005

In technology of ink-jet coating, Image quality from correlation between paper and ink depends on the properties of printer and ink as well as those of paper material. Generally, According to the quality of ink that consists of colorants from 5 to 20 percent, It seems that absorption behavior of each ink is different. In this study, we studied to estimate the effects of dye and pigment ink on the absorption and printing properties using 2-type papers on the market and 3-type silica-based coated papers whose pore structure is different. Using the theory of contact angle to evaluate the absorption property, it was possible to measure the baseline length between paper and ink, volume of droplet as well as contact angle. Also, It was possible to calculate wetting energy(mN/m) and spreading coefficient(mN/m) using the surface tension of each ink. These measurements were available to estimate ink-jet qualities.

• 한국염색가공학회지
• /
• 제19권4호
• /
• pp.32-37
• /
• 2007

In this study, we have obtained the protein patterns using the membrane patterning of soft-lithography technique. The rapid detection of protein including bovine serum albumin (BSA) was resulted from the interaction with 1,3-bisdicyanovinylindane. For the proof of the interaction between BSA and dye, the UV-vis absorption spectra of BSA and dye were observed at 278 nm and 580 nm, respectively. As expected, the absorption spectrum of the interaction between BSA and dye was observed at 584nm. The absorption spectrum of the interaction was red-shifted. In addition, the optical images of the selectively reacted protein patterns showed the distinctive change of patterned color at different pH conditions. Because the dye has negative charges, the charge of BSA at different pH conditions could influence the interaction behavior between dye and BSA. Therefore, in the case of pH 7, the selectively patterned protein substrates obtained deep blue color pattern caused by electrostatic interaction between negative charges of the dye and positive charges of the BSA. However, in the case of pH 10, selectively patterned protein substrates obtained light blue color pattern because the electrostatic interaction was relatively lower than pH 7 due to the change of overall charge distribution of BSA.

• 한국염색가공학회지
• /
• 제10권5호
• /
• pp.56-62
• /
• 1998

In the prior study, the dyeing behaviors of Milling Cyanine 5R on silk fiber in aqueous dyeing liquor including small amount of organic compounds were investigated. The most effective compound was acetophenone which increased dye uptake as well as dyeing rate. In this study, the role of the acetophenone in dyeing of silk with Milling Cyanine 5R was studied. By addition of acetophenone into the dye solution, the molar absorptivity of Milling Cyanine 5R increased, and the wavelength of maximum absorption was shifted to longer wavelength, namely bathochromic shifted. This shows that the acetophenone prevents the dye to aggregate, and increases the number of monomeric dye molecule relative to the dye solution without acetophenone. This fact was also confirmed by the increase of the permeation rate of the dye through cellulose semipermeable membrane from the dye solution including the acetophenone. From these results, the acetophenone acts as a prohibitor of dye aggregation, increases the number of monomeric dye molecules even at relatively low temperature, and makes the dyes penetrate into the fiber easier.